
Beneq Oy
Olarinluoma 9 Tel.+358 9 7599 530 VAT ID FI19563372
FI-02200 Espoo Fax+358 9 7599 5310 www.beneq.com
Finland lumineq@beneq.com www.lumineq.com
Technical data sheet
EL320.240.36-HB SPI
Series (5.7”)
ICEBrite™ small graphics TFEL display
Beneq and Lumineq are registered trademarks of Beneq Oy. ICEBrite is a trademark of Beneq Oy. Technical information in this document is
subject to change without notice. October/2020
The EL320.240.36-HB SPI is a high-bright QVGAdisplay for use in extreme operating conditions.
Lumineq® Thin Film Electroluminescence (TFEL)
displays have the widest operating temperature
range of commercially available technology.
TFEL displays are ideal for use in industrial, medical,
transportation, military, public safety and other
demanding applications.
Available with an optional tempered glass for
enhance the display front glass damage resistance,
and with ITO glass including a metallized edge to
improve the display EMI properties.
Lumineq Thin Film Electroluminescent Display
• Wide temperature area from -50 to +95 °C
• Sunlight readability
• SPI Interface
• Broad input voltage range: 8…18 VDC
• SAE J-1455 compliant
General TFEL features and benefits:
• Instant ON in cold and hot temperatures
• No need for heating and cooling
• Very long lifetime
• Extremely stable brightness – measured 100,000 hours
with > 85 % left of initial luminance
• TFEL display brightness, contrast, viewing angle and
response time are the same across the entire operating
temperature range
• Wide viewing angle > 179° with crisp and clear image
• Very fast response time, < 1 ms
• Extremely rugged and solid TFEL display structure
• Very long production life time
• Extremely wide operating temperature range
HB SPI with
Conformal
coating
EL320.240.36-HB TI SPI M CC
HB SPI CC with
ITO and
tempered glass
Technical specifications:
Thin Film Electroluminescence
179°, any viewing directions
HB SPI: 150 cd/m2 typical areal @ 250 Hz
HB TI SPI M: 145 cd/m2 typical areal @ 250 Hz
90:1 typical at 500 lux
8:1 typical at 10,000 lux
2:1 typical at 50,000 lux
180 g (HB SPI), 225 g (HB TI SPI M)
3.5 W typical @ 120 Hz
5.5 W typical @ 250 Hz
93% RH, oper. @ +40 °C, IEC 60068-2-78
18,000 m, oper., IEC 60068-2-13
100 g-force, 6 ms, IEC 60068-2-27, test Ea.
5 to 500 Hz, 0.05 g2/Hz random
SPI (Serial Peripheral Interface Bus)
Anti-glare or Anti-reflective film, Tempered glass,
Resistive touch screen, ITO glass, Conformal
coating