Twig Tracer is a special application for real time
monitoring and viewing movements and positioin of e.g. your partner or Twig Locator device.
With Twig Tracer you can, when requested,
communicate your exact position to other people. You can also follow-up the movements of
your partners who are listed as targets in the
application. You can request position, tracking
and area tracking of the selected target(s), and
view your own as well as your targets' position
on map. In addition, you can configure the GPS
mode of a selected target device.
Twig Tracer targets can be any GSM devices with
GPS positioning and support for MPTP commands, such as another Twig Discovery phone,
or other Benefon GPS-GSM devices.
Note that not all commands might not be implemented in all devices.
To enter the application,
Tracer
. To enter the menu grid while in stand-by
mode, you can also press
press ~ and select
".
STAR TIN G TWIG TRACE R
To
exit Twig Tracer application, press -
Exit
.
3
APPLICATION VIEWS
APPLICATION VIEWS
There are four views available in
application: Target List view together with Map
view, Guide view and Data view. When the
application is launched, the Target List view is
displayed. The other three views can then be
accessed via the Target List view.
Map view, Guide view and Data view are parallel with each other. When the views are
accessed for the first time, the Map view is displayed as a default. Later, the first displayed
view is the one you have used previously.
You can switch between the Map, Guide and
Data views by pressing the arrow keys n left/
right. While on any of these three views, you
can close the view and return back to the Target
List by pressing the right function key -
Back
.
4
Twig Tracer
Target List view
Target List displays all available targets stored
in the Twig Tracer application.
You can view target information by selecting a
desired target and pressing the left function
key .
ously selected view: Map view, Guide view or
Data view. You can also call directly to the tar-
get by pressing the hook-up key l.
CREATING NEW TARGET
If you wish to create a new target, highlight
New target
dle key
mation as described in
You can also create a new target via Twig
Inbox. Select the desired message from the
message list and save the sender as a target by
selecting
on, see the
inbox and twig configurator on page 13
Open
. Target is opened on your previ-
in the Target List and press the mid-
" to open it. Then key in target infor-
editing on page 13
Save as target
user manual for twig discovery pro, twig
. For more information
.
.
APPLICATION VIEWS
MY TWIG
My Twig
created automatically by the Tracer application.
My Twig
gets, although some options depend on
whether a target or
selected.
represents your own position and it is
can be handled the same way as tar-
My Twig
is currently
TARGET LIST OPTIONS
You can access Target List options menu by
pressing the middle key
List. Highlight the desired option and select it
by pressing the middle key
The Target List options are:
Edit, Trac k, Refresh my position, Send my
position
,
Remote configuration, Clear, Set-
tings
,
Target info
The available options depend on whether you
have currently selected a target or
more information about the Target List options
and how to use them, see
menu on page 13
. Note that the target device
" while in the Target
".
and
Delete
.
My Twig
twig tracer main
. For
does not necessarily support all commands
even if they are displayed in the target list
options.
Map view
The map view displays targets on the map. If
the map view is entered from the Target List,
the map is opened up centered on the selected
target. If
tered on your own position.
You can handle the map by zooming and panning it. Zoom the map in by using the star key
+. Or zoom out by using the hash key §.
To switch into the panning mode, press the
alphanumerical key 0. To return back to the
normal map view, press 0 again. For more
information about map handling, see
page 14
Current Target position
An icon with circle around it displays the position of the selected target. If the target is moving, its direction is displayed with an arrow.
.
My Twig
is selected, the map is cen-
map on
5
APPLICATION VIEWS
If you want to send a location update request
for your target, press the left function key .
Update
. If you have selected
the left function key .
My Twig
Refresh
, pressing
requests
updated data of your own position.
If you have defined shortcuts for specified targets, you can also press and hold down the
alphanumerical keys 1... 7 and 9 to
change the current target on the map. Pressing
the Twig key 8 displays
My Twig
.
Note that the map view is blank if there is no
target
known position for the selected
.
Trace
You can also see your currently selected target’s trace. The trace is constantly being
updated when the target’s position on the map
changes. If you have selected a target, the
trace is shown as a dotted line. If
selected, the trace is shown as a black, continuous line.
Viewing traces requires the setting to be
enabled. For more information about enabling
traces, see
6
editing on page 13
.
My Twig
is
Target name and
shortcut number
Map scale
Target’s trace
Data box with distance,
speed and position age
information
Target’s/My Twig’s
heading
Direction to
target/
Base point
(if set)
Target’s current
position
APPLICATION VIEWS
Other targets and base point
Besides the current
map, you can also see all the defined targets
that have their position known and are within
the map scale. The targets are represented on
the map by icons defined in the Target List.
There are no traces leading to these targets.
If there is a base point set and it is within the
map scale, you can also see an icon displaying
its position. For more information about the
base point, see
targ
et on the center of the
twig key menu on page 11
.
Data box
In data box you can see information about target’s speed and distance from your own position, as well as the time of the last target
location update. You can also see an icon representing the battery level of the selected target or
the distance information field displays distance
to base point. This requires that the base point
has been set and guidance to it is on.
If you do not want the data box to be displayed, you can set
My Twig
. If you have selected
Hide on timeout
in
My Twig
Settings
The data box is displayed again if any key is
pressed or if the phone receives new position
information. For more information, see
soft keys on page 19
.
MAP VIEW OPTIONS
While on the Map view, you can open the Map
view options by pressing the middle key
Then highlight the desired option and select it
by pressing the middle key
Map view options include:
Map, Track, Refresh my position, Send my
position
tings
The available options depend on whether you
have selected a target or
information about the Map view options and
how to use them, see
,
page 13
necessarily support all commands even if they
are displayed in the Map view options.
.
,
Remote configuration, Clear, Set-
, and
Target in fo
. Note that the target device does not
" again.
.
My Twig
twig tracer main menu on
. For more
title and
".
7
APPLICATION VIEWS
Guide view
Guide view is used to guide you to the current
target. A dial card and a compass needle are
displayed showing you the direction to the target. This requires that both your own position
and the target position are known.
If you have currently selected
guidance is on, the compass will guide you
from your current position to your previously
defined base point. For more information about
the base point, see
twig key menu on page 11
If your current target does not have a known
position, the target arrow is invisible. The target arrow is invisible also when the base point
is not defined and you have currently selected
My Twig
. If the dial card is invisible, there is no
valid information of your own position.
If you have defined shortcuts for specified target, you can also press and hold down the cor-
responding alphanumerical key 1...7 and9 to quickly change the target you are being
guided to.
8
My Twig
, and
.
Your current
Target ’s na me and
shortcut number
Distance to
target/ base
point
Target arrow:
Direction to
the target/
base point
Direction
to south
direction
Direction to
north
Target’s
current
speed/Your
current
speed (if My
Twig is
selected)
Age of the last location update
GUIDE VIEW OPTIONS
While on the Guide view, you can open the
Guide view options by pressing the middle key
". Then highlight the desired option and select
it by pressing the middle key
Guide view options include:
Track, Refresh my position, Send my position
Remote configuration, Clear, Settings
Target info
The available options depend on whether you
have selected a target or
information about the Guide view options and
how to use them, see
page 13
necessarily support all commands even if they
are displayed in the Guide view options.
.
. Note that the target device does not
" again.
and
My Twig
twig tracer main menu on
. For more
,
Age of the
last location update
Target’s
speed
Bearing
APPLICATION VIEWS
Target’s name and
shortcut number
Estimated
Time
Enroute
Data view
On data view, you can see various details about
the current target, depending on whether you
have selected a target or
tomize the data view contents by selecting the
desired data fields in
content on page 19
for more information.
My Twig.
Settings
You can cus-
. See
data view
Number of updates
DATA VIEW OPTIONS
While on the Data view, you can open the Data
view options by pressing the middle key
".
9
APPLICATION VIEWS
Then highlight the desired option and select it
by pressing the middle key
Data view options include:
" again.
Track, Refresh my position, Send my position
Remote configuration, Clear, Settings
Target info
The available Data view options depend on
whether you have selected a target or
For more information about the Data view
options and how to use them, see
main menu on page 13
device does not necessarily support all commands even if they are displayed in the Data
view options.
10
.
. Note that the target
and
My Twig
twig tracer
,
.
TWIG KEY AND TWIG KEY MENU
TWIG KEY AND TWIG KEY MENU
Twig key
The Twig key 8 is a special key within
Trace r
application. While on the Target List
view, pressing this key opens up your own
position, called
played on the map by a dedicated icon.
If you have selected
Map, Guide or Data views, pressing the Twig
key opens up Twig key menu. In Twig key
menu you can easily store your current position
as a base point and, once the base point is set,
start guidance to it any time later on.
My Twig
. The position is dis-
My Twig
and you are on
Twig
Twig key menu
You can access Twig key menu by pressing the
alphanumerical key 8 while in
application. Twig key menu options are:
to base point
Clear base point
/
Cancel guidance/ Set base point
. Select the desired option by
Twig Tracer
Guide
highlighting it and pressing the middle key
You can exit the menu by pressing the right
Back
function key -
Guide to base point
•
when the base point has been set. Selecting
this option will start guidance to base point
from your current position. After selecting
this option, a notification informs you when
guidance is started and you will be directed
back to your previously selected view.
•
Cancel guidance
guided to base point, you can cancel the
guidance by selecting this option. Press the
left function key .
choice, or the right function key -
cancel the operation and return back to your
previously selected view.
•
Set base point
you to save your current position as base
point. After setting the base point, you can
select guidance to it from any position by
selecting
/
already a base point set, selecting
point
Guide to base point
will cause the phone to ask you if you
.
: This option is available
: If you are currently being
Yes
to confirm your
: Selecting this option enables
. If there is
".
No
to
Set base
11
TWIG KEY AND TWIG KEY MENU
want to clear the existing base point and set
a new one. Press the left function key .
Yes
to set the new base point. Pressing the
No
right function key -
your previously selected view without setting the new base point.
•
Clear base point
clear the currently set base point. If there is
an ongoing guidance to the base point,
selecting this option will cause the phone to
ask you if you want to clear the base point
and cancel the guidance. Pressing the left
function key .
and clears the base point. Pressing the right
function key -
base point and returns back to your previously selected view without making any
changes.
12
: With this option you can
Yes
returns back to
cancels the guidance
No
cancels clearing the
TWIG TRACER MAIN MENU
TWI G TRACER M AIN MENU
Pressing the middle key " while in any of the
views launches the main menu for Twig Tracer
application. You can select main menu options
by highlighting the desired option from the list
and pressing the middle key
you want to exit the menu, press the right
function key previously selected view.
Back
" to open it. If
to return back to your
Editing
You can edit your currently selected target’s
Edit
information by choosing
options for editing are
Show trace, Authorization
options are available also when
chosen from the Target List view options.
•
Name
: Key in target name and save it by
pressing the left function key .
you can add the name by pressing the
middle key
" and then selecting the desired
. The available
Name, Number, Icon
and
Shortcut
. These
New target
Save
is
. Or
contact from the phone’s contact list. Picking
up a contact automatically fills contact’s
name and number to the corresponding target information fields.
•
Number
pressing the left function key .
you can pick the number from the phone’s
contact list by pressing the middle key
and then selecting the desired number from
the contact list. If there is already a name
defined for the target, picking the phone
number will not change the name. If the
name is not yet defined, picking the phone
number will add both the number and the
name to the corresponding target information fields.
,
•
Icon
icons available for the target. Use the arrow
keys n to highlight the desired icon and
choose it by pressing the middle key
you want to cancel the operation and keep
the current icon, press the right function key
-
: Key in target number and save it by
: The icon option shows you a list of
Cancel
.
Save
. Or
"
". If
13
TWI G TRACE R MA IN ME NU
•
Show trace
to see a trace to the selected target on the
map view or not. The available trace options
are
choice by pressing the middle key
cel the procedure without changes by press-
ing the right function key -
Authorization
•
you can decide whether the target is authorized to get your position automatically or
not. If you receive a location request from
an authorized target, your phone replies it
automatically by sending your location
update. If a location request is received from
unauthorized target, you need to approve
sending your position.
•
Shortcut
for the target. Shortcuts can be assigned for
the alphanumerical keys 1... 7 and
9. Choose the number you want by high-
lighting it and pressing the middle key
the shortcut is already in use, you will be
asked whether you want or not to replace
the current assignment. Press the left func-
14
: You can select whether you want
Not shown, Short
or
Long
. Select your
" or can-
Cancel
: With the authorization option,
: You can select a shortcut number
.
". If
tion key or the right function key .
back to the shortcut selection list.
Yes
to set the new assignment
No
to return
Map
While on the map view, you can open
from the main menu options list by pressing
the middle key
available options include:
Zoom out
press the middle key
. Highlight the desired option and
" and selecting
Pan, Zoom in
" to select it.
PANNING THE MAP
You can activate map-panning mode by choos-
Pan
from the map sub-options list. The pan-
ing
ning mode enables you to scroll the map view
to desired directions.
You can use the arrow keys n to pan the map
up, down, left and right. Or you can use the
alphanumerical keys 1.. 4 and 6... 9
to pan the map to the corresponding directions.
Press the keys repeatedly to the desired direc-
Map...
Map...
. The
and
TWIG TRACER MAIN MENU
tion. Pressing and holding down the selected
key will increase the panning speed.
While in the panning mode you can open panning options list by pressing the middle key
The options include
cel panning
the list and select it by pressing the middle key
. Highlight the desired option from
Zoom in, Zoom out
and
".
Can-
".
Zooming in
Select
zoom the map. You can also zoom the map in
by using the star + and out by using the
hash key
to return back to the normal map view. When
the panning mode is active you can also use
the right function key .
to the normal map view.
Pressing the alphanumerical key 0 switches
off the panning mode and returns to the map
view.
or
§. Select
Zooming out
if you want to
Cancel panning
Cancel
if you want
to return back
ZOOMING THE MAP
Choosing
in while
level out. Highlight the desired option from the
list and press the middle key
either
is not available.
You can also zoom the map by using the star
and the hash key. Pressing the star key +
zooms the map in while pressing the hash key
§ zooms the maps out.
Zoom in
Zoom out
Zoom in
will zoom the map one level
is used to scale the map one
". Note, that if
or
Zoom out
is invisible this option
Track
Tracking sub-options include
Request tracking, Cancel tracking, Request area
tracking
and
Cancel area tracking
desired option and select it by using the middle
key
". You can return back to the main menu
options list by pressing the right function key
-
Back
.
Request update
. Highlight the
15
,
TWI G TRACE R MA IN ME NU
REQUEST UPDATE
Select
Request update
information of your
request is sent for your currently selected target.
Confirm request sending by pressing the
function key .
pressing the right function key -
sending the request, you will return back to
your previously selected view.
if you wish to get updated
t
arget’s position. The
Yes
or cancel the request by
No
. After
left
REQUEST AND CANCEL TRACKING
Selecting
define the time interval and number of updates
for tracking your target.
•
16
Request tracking
Interval
: When you enter this option for the
first time, the default value for tracking
update interval is 15 minutes. You can set
the interval to any value between 20 seconds (00:00:20) and 100 minutes
(99:59:99).
option enables you to
•
Updates
default value for
from 1 to 9 updates.
The application will remember your last defined
setting, so the same values are automatically
used for next tracking. Select
again, if you want to change these settings.
Selecting
ing. Confirm your choice by pressing the left
function key -
cancel the tracking, press the right function key
-
: When entered for the first time, the
Updates
is 5. You can select
Request tracking
Cancel tracking
No
.
cancels ongoing track-
Yes
. If you do not want to
REQUEST AND CANCEL AREA TRACKING
Request area tracking
interval, radius and trigger settings for area
tracking your target.
•
Interval
: When you enter the option for the
first time, the default value for area
updating interval is 15 minutes. You can set
the interval to any value between 20
seconds (00:00:20) and 100 minutes
(99:59:99).
enables you to define the
•
Radius
: With this option you can set the
radius for the tracking area. The center of
the area is your target’s last known position.
Highlight the desired radius from the list and
select it by pressing the middle key
•
Trigger
: You can set the area tracking trigger
While out
to
the trigger is launched once when the target
leaves the defined area. If
the trigger is launched first time when the
target leaves the defined area. While the
target stays outside the defined are, the
trigger is repeated at certain time interval.
Select Cancel area tracking if you want to terminate area tracking. Confirm your choice by
pressing the left function key .
the operation by pressing the right function key
No
-
or
On exit
. If
On exit
.
is selected,
While out
Yes
or cancel
".
is on,
TWIG TRACER MAIN MENU
Refresh my position
If you want to get updated information of your
own position, choose
selecting the option, updating position starts
automatically and you will be taken back to
your previously selected view.
A
Position refreshed
the location update is completed. Note that this
may sometimes take several minutes.
Refresh my position
-notification is shown when
. After
Send my position
With
Send my position
own position information as a location update
or as an SMS message.
•
Send update
update of your own position to one or many
targets. Select the desired targets from the
target selection list by highlighting them and
pressing the middle key
left function key .
tion update.
option you can send your
: Selecting this option sends an
". Then press the
Send
to send the loca-
17
TWI G TRACE R MA IN ME NU
•
SMS with coordinates
position coordinates by choosing either
dard
or your currently used format. The SMS
editor opens up a message with your last
known coordinates. You can add your own
message, select the recipient(s) from the
phone’s Contacts list and send the message
by pressing the left function key .
For more information about sending SMS
messages, see
twig discovery user’s manual page 33
: Select the format of
Stan-
Send
creating and sending an sms on
.
Remote configuration
With
Remote configuration
get’s GPS mode. First, select
the middle key
Off/ Economy/ Full power
mode
pressing the middle key
choice by pressing the left function key .
Send
.
Remote configuration is not available if you
have currently selected
18
". Then highlight the desired
you can set your tar-
GPS
by pressing
and select it by
". Confirm your
My Twig
. Note that the
target device needs also to support remote
configuration before this function is possible.
Clear
You can clear
desired option and press the middle key
.
•
Meters
both. Select the meter you wish to clear by
highlighting it and pressing the middle key
" and confirm the clearing by pressing the
left function key .
Trace
•
Note that
have currently selected
: Selecting this option clears your own
trace from the phone’s memory. Confirm the
clearing by pressing the left function key
-
Ye s
the right function key -
Meters
or
Trac e
. Highlight the
: You can clear
or cancel the operation by pressing
Clear
option is only available if you
Odometer
Clear
.
My Twig
No
or
.
.
".
Speed
or
TWIG TRACER MAIN MENU
Settings
MAP HANDLING
•
Show data fields
fields are shown while on the map view.
Not shown, Always
Select
want the data fields slide out of the view
after few seconds. If
data fields will slide back whenever any key
is pressed or new position information is
received from a target. The fields then stay
visible for a moment before sliding out of the
view again.
•
Show labels
labels are shown while on the map view. The
available options are
Name, Shortcut
desired option by highlighting it and press-
ing the middle key ".
•
Automatic zoom
On
zoom
ferent maps, the automatic zoom scales to
correspond to the most accurate map that is
available in the phone’s memory. If the
: You can define whether data
or
Timeout
Timeout
is selected the
: You can define which data field
Name and shortcut
or
Not shown
: You can set the automatic
or
Off
. When switching between dif-
. Select the
if you
automatic zoom is off, the zooming can be
done manually. For more information, see
zooming the map on page 15
.
TITLE AND SOFT KEYS
You can set the title and soft key areas to hide
automatically. Select
these areas to be visible all the time or
if you wish the areas to slide out of the view
after a certain time.
If
Timeout
is selected you can make the title
and soft key areas slide back again by pressing
any key. The areas will then stay visible for a
few seconds after which they will slide out
again if none of the phone keys is pressed.
,
DATA VIEW CONTENT
You can select data for five data fields. Press
the middle key
list or the right function key -
the option without making any changes.
Always shown
" to open data view selection
if you want
Cancel
Timeout
to exit
19
TWI G TRACE R MA IN ME NU
Selecting data fields
The available items for data view fields depend
on whether you select target data view or
Twig
data view. Highlight the desired option
and press the middle key
•
Coordinates
Available for both target and
views.
Position age
•
in days/hours/minutes/seconds. If the last
update is older than 100 days, the label of
this field is
replaced by the date of the last location
update. Available for both target and
data views.
Date
•
data view.
Time
•
Twig
Odometer
•
able for
20
: Target position as coordinates.
: Age of the last location update
Timestamp
: Your current date. Available for
: Your current time. Available for
data view.
: Displays travelled distance. Avail-
My Twig
data view.
" to select it.
My Twig
and day unit is
My
data
My Twig
My Twig
My
Travel time
•
for
Speed: Tar get
•
Available for both target and
views.
Distance
•
point.
•
Altitude
Tracking updates
•
ber for the last tracking update/ total number of updates.
•
Area tracking updates
number for the last area tracking update/
total number of updates.
•
ETE
mate time to reach the target or base point.
ETA
•
time of arriving to the target or base point.
•
Course
Bearing
•
lowed to reach the target or base point.
: Displays travelled time. Available
My Twig
data view.
’s current travelling speed.
My Twig
: Distance to the target or base
: Height above sea level.
: Displays a sequence num-
: Displays a sequence
(Estimated Time Enroute): The approxi-
(Estimated Time of Arrival): Estimated
: The current direction in degrees.
: The direction in degrees to be fol-
data
•
Dawn
: The time at which sun is 6 degrees
below the horizon. There is already enough
sunlight for objects to be distinguishable.
•
Sunrise
: The time at which sun arises above
the horizon.
Sunset
•
•
•
Note that you can select units used for distance, speed, altitude and coordinates is phone
settings. You can also select in which way time
and date are presented. For more information,
see phone settings on
ual page 49
: The time at which sun sets below the
horizon.
Dusk
: The time at which sun is 6 degrees
below the horizon. There is just enough sunlight for objects to be distinguishable.
Battery level
level.
: Displays the battery charge
twig discovery user’s man-
.
VERSION
You can see information on your current application version.
TWIG TRACER MAIN MENU
Target info
Target info option displays the information
related to your currently selected target. The
information depends on whether you have
selected a target or
the following details:
•
Coordinates
Course
•
Bearing
•
to reach the target or base point.
Timestamp
•
days/hours/minutes/seconds.
•
Tracking updates
ber for the last tracking update/ total number of updates.
•
Area tracking updates
number for the last area tracking update/
total number of updates.
•
Distance
point.
: Target position as coordinates.
: Current direction in degrees.
: Direction in degrees to be followed
: Age of the last location update in
: Distance to the target or base
My Twig
: Displays a sequence num-
. The list includes
: Displays a sequence
21
TWI G TRACE R MA IN ME NU
•
ETE
(Estimated Time Enroute): The approxi-
mate time to reach the target or base point.
•
ETA
(Estimated Time of Arrival): Estimated
time of arriving to the target or base point.
•
Speed
: Current travelling speed.
Average speed
•
Top speed
•
Odometer
•
able for
Travel time
•
Altitude
•
Battery
•
Dawn
•
•
•
22
: The time at which sun is 6 degrees
below the horizon. There is already enough
sunlight for objects to be distinguishable.
Sunrise
the horizon.
Sunset
horizon.
: Average travelling speed.
: Top travelling speed.
: Displays travelled distance. Avail-
My Twig
data view.
: Displays travelled time.
: Height above sea level.
: Displays the battery charge level.
: The time at which sun arises above
: The time at which sun sets below the
•
Dusk
: The time at which sun is 6 degrees
below the horizon. There is just enough sunlight for objects to be distinguishable.
Deleting Target
You can delete targets from the Target List one
by one. Highlight the target you wish to delete
by using up and down arrow keys n. Then
choose
the middle key
the operation. To confirm your choice, press the
left function key .
tion by pressing the right function key -
Delete
from the options list by pressing
". You will be asked to confirm
Yes
, or cancel the opera-
No
.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.