BENDIX TCH-003-024 User Manual

Technical Bulletin

Bulletin No.: PRO-03-24 Effective Date: 10/15/83 Page: 1 of 1

Subject: HR-1 Hydraulic Relay Valve

The recently released HR-1 Hydraulic
Relay Valve is designed for use on
hydraulic braked light and medium
straight trucks that incorporate a
separate and independent hydraulically
operated spring actuated parking brake
system.

It functions as a control point that reduces and directs hydraulic pump pressure to and
from spring actuated parking brakes. A special PP-1 Push Pull Control Valve is used in
conjunction with the HR-1. It contains special “O” rings and lubricant that are compatible
to the fluid used in a hydraulic system and has a nominal automatic release pressure of
10 p.s.i. It is identified with a spot of yellow paint and is serviced with maintenance kit

104091.
This new system will be standard on all 1984 Ford models F, C, L, and B trucks in the

600, 700 and 800 series. The following are the components and part numbers that make
up the hydraulic relay system.