BENDIX TCH-002-008 User Manual

Technical Bulletin

Bulletin No: TCH-002-008 Effective Date: 11/5/2008 Cancels: TCH-002-008 dated 9/10/2008 Page: 1 of 1

Subject: New Bendix

Bendix Spicer Foundation Brake LLC now offers spring brake chambers with a welded automatic slack adjuster clevis. Many OEM’s are using welded clevis spring brake chambers in production to reduce installation time and to accommodate certain applications. Now the dependable and reliable Bendix® SB-4™ spring brake chambers are available to the Aftermarket for these applications with the time saving welded clevis.

Note: The 1.3 inch pin-to-pin dimension on the welded clevis allows it to be used with single and double clevis pin slack adjusters in applications requiring the dimensions shown here. The Bendix® ASA-5® Slack Adjuster requires a clevis pin-to-pin dimension of 1.0 inch; therefore, it can not be used with the spring brake chambers shown here.

“Welded Clevis” Spring Brake Chamber

2.25”

1.3”

Pin-to-Pin

3/8”-18

NPTF Ports

1/4” Dia. Pin

1/2” Dia. Pin

Service

Pc. No.

K022868 K020826 30/30 2.50” Yes K022882 K020869 30/30 ELS 3.00” Yes

Replaces

OE Pc. No. Type/Size Stroke

Shipped

Caged?