BENDIX PNU-112 User Manual

Part Number Update

Bulletin No: PNU-112-000A Effective Date: October 8, 2007 Cancels: N/A Page: 1 of 1

Subject: Obsolete Bendix® MC-30™ Trailer ABS Kits: Replacement Bendix® TABS-6 Trailer ABS

Original Bendix® MC-30™ Trailer ABS Complete Kit Bendix Replacement Kits

5009736 2S/1M, Bracket Mount 5009736N 2S/1M, Bracket Mount 5009738 2S/1M, Tank Mount 5009738N 2S/1M, Tank Mount 5009739 2S/1M, Bracket Mount 5010050 2S/1M, Tank Mount 5009737 Dolly, Bracket Mount 5009721 Dolly, Bracket Mount 5009712 2S/2M - Axle, Bracket Mount 5009715 4S/2M - Axle, Bracket Mount 5009717 4S/2M, Bracket Mount 5009719 4S/2M - Axle, Bracket Mount

5020216

5020217

(In all cases, extra

components may be

necessary depending on

the vehicle. See Kit

Contents Table below.)

5020218

Bendix

TABS-6 Trailer ABS Kits 5020216 5020217 5020218

2S/1M -

Dolly is Default.

Auto-Conﬁ gures

to 4S/2M-Side

ABS Conﬁ guration:

2S/1M

Axle Only

2S/1M

Dolly

Only

Kit Contents Quantity per Kit

Bendix® T ABS-6 Trailer ABS Assembly 1 1 1

Bendix (4 port, bracket mount, 3 PSI, ¾ in. supply)

Power Harness (780 in. 5-pin Packard, Non-Terminated 10 in. Indicator Lamp)

Power Harness (120 inch 5-pin Packard, Non-Terminated 10 in. Indicator Lamp)

ABS Pigtail, 4S/2M Power (9 in.), MOD2 (36 in.), Sensor C-D (60 in.), Diagnostic (9 in.)

Bendix Bendix Bendix Bendix Bendix Bendix Cable Tie 8 in. (Cable Routing) 25 25 30 Cable Tie 24 in. (Sensor Lead Axle Routing) 6 6 12 ABS Sensor Wire Clip (Sensor Delivery Hose Routing) 10 10 20 ABS Indicator Light 1 1 1 Decal - ABS Lamp 1 1 1 Decal - ABS Diagnostics 1 1 1

BR9235™ Modulator Relay Valve

WS-24™ Wheel Speed Sensor (DIN, 90º, 16 in.) 2 2 4

WS-24™ Wheel Speed Sensor Extension Cable (60 in.) 2 2 2

WS-24™ Wheel Speed Sensor Bushing 2 2 4

SR-5™ Trailer Spring Brake Valve (½ in.) 1 - 1

TR-3™ Inversion Valve - 1 -

DC-4™ Double Check Valve - 1 -

Note: Power Line Carrier (PLC) is enabled on all these Bendix® TABS-6 Trailer ABS assemblies.

-- 1

1- 1

-1 -

-- 1