BENDIX BW7330 User Manual
™
VIPro™ by Bendix
®
Linings –
A great program just got even better.
by Bendix®
Linings
For years, Bendix and VIPAR® have partnered to deliver VIPro™ by Bendix® linings. These
quality linings, available exclusively to members of the VIPAR network, deliver consistent
stopping power for every application, and are available at an economical price.
Now, there’s a great reason to take another look at the VIPro by Bendix program.
Bendix has brought their reman brake shoe operations in house. So, VIPro by Bendix
shoes are produced at the new Bendix Brake Shoe Remanufacturing Center under the
same rigorous standards required by Bendix and their OEs.
Select the friction that’s right for you.
These frictions are designed for single axles from 20,000 lbs. up to a maximum of
23,000 lbs. and tandem axles from 40,000 lbs. up to a maximum of 46,000 lbs. GAWR.
All VIPro by Bendix linings meet FMVSS 121 testing standards, and are certified using
an AL 165 factor.
VIPro™ 20K Standard Linings
The VIPro 20K Standard lining provides consistent performance in day-to-day continuous
service markets using single axles up to a maximum of 20,000 lbs. and tandem axles up
to a maximum of 40,000 lbs. GAWR. The VIPro 20K Standard is ideally suited for light& medium-duty applications, such as dry freight, inter-modal leasing, and general
highway hauling.
• Good stopping power • Good fade characteristics
• Good lining life
VIPro™ by Bendix
®
Reman Brake Shoes are
produced in the U.S. at a
state-of-the-art 70,000
square foot facility.
Applications
Conventional Line Haul Tandem Axle Truck Flatbed
Comparable Linings*
Meritor® MG1 Abex® 6166 Fras-le® 550 FleetPride® OTR BLU
TruckPro
Haldex
®
Armada AR2 Stemco® Crest XL BrakePro® CM15 Marathon® UB
®
GD 2016 FF GBC® GB20
VIPro™ 20K Premium Linings
The VIPro 20K Premium lining provides excellent performance in demanding highway
applications and in mountainous terrain. The VIPro 20K Premium lining is a multiapplication, all makes lining for single axles up to a maximum of 20,000 lbs. and tandem
axles up to a maximum of 40,000 lbs. GAWR.
• Excellent lining life • Quiet operation
• Long drum life • Low thermal expansion characteristics
Applications
Conventional Line Haul Tanker School Bus
Beverage Flatbed Pick-up & Delivery
Comparable Linings*
Meritor MG2L Abex 6008 Fras-le 555 TruckPro Armada AR2
BrakePro CM16 FleetPride OTR BLU Marathon DB Haldex GF 3008 FF
*Performance of friction will vary based on vehicle type, load, terrain, and driver. Cross reference
information is provided as a reference only and is not indicative of equal performance characteristic.
Economical, consistent stopping power for every application.
cled paper
by Bendix®
Linings
™
VIPro™ 23K Premium Linings
The
VIPro™ 23K Premium lining is a medium to high friction formulation which provides
excellent stopping power in demanding applications. VIPro 23K is a multi-application lining
for single axle applications up to a maximum of 23,000 lbs. and tandem axles up to 46,000 lbs.
GAWR.
• Excellent lining life • Quiet operation
• Long drum life • Excellent fade resistance
Applications
Line Haul/Heavy Line Hau
Bulk Hauler Mixer Truck Roll-Off
l Tri-Axle Dump Tanker Multi-Axle
Comparable Linings*
Meritor® MG2 Haldex® GG 3023 FF Fras-le® 555 Marathon® HS GBC® GB23
TruckPro
®
Armada AR4 FleetPride® OTR RED BrakePro® CM18 Abex® 685
Application Notes: Some Heavy Duty 23K applications can require a Severe Service
lining material based on specific application. See BW7328 on the Bendix Literature
Center at www.bendix.com for applicable Severe Service material.
*Performance of friction will vary based on vehicle type, load, terrain, and driver. Cross reference information is
provided as a reference only and is not indicative of equal performance characteristic.
With this exclusive
™
program, VIPro
by Bendix
®
has
your friction
needs covered.
Bendix delivers OE quality in a reman brake shoe.
Bendix (Bendix CVS and Bendix Spicer Foundation Brake) is a leading OE supplier, bringing
more than 35 years of remanufacturing expertise and 85 years of innovative wheel-end
solutions to our reman brake shoe operations. In the past two decades, we’ve produced more
than 40 million OE brake shoes, and are the standard brakes on Kenworth®, Peterbilt®, Volvo®
and Mack® vehicles.
Quality in every detail.
Every shoe is coined, a process that returns the shoe to OEM tolerances. Our next generation
coatings combat corrosion and virtually eliminate rust jacking. To select high quality, durable
friction we go beyond industry standard friction testing to conduct our own proprietary testing.
Our OE process helps prevent the problems associated with cracking, as well as loose lining
and rivets. To confirm that our shoes meet our standards and deliver reliable performance,
our inspection and testing procedures go beyond industry norms. With more than 75,000
shoes readily available in inventory and three North American distribution centers, our
customers have fast and easy access to the products they need.
For more information, call 1-866-610-9709 or visit www.foundationbrakes.com today.
Bendix Spicer Foundation Brake LLC • 901 Cleveland Street • Elyria, Ohio 44035 • 1-866-610-9709 • foundationbrakes.com
BW7330 ©2013 Bendix Spicer Foundation Brake LLC • 07/13 • All Rights Reserved • Printed in U.S.A.
Printed on recy
Loading...