Page 1
UNIVERSAL LEG ASEMBLY
Instructions apply to the following chairs:
Lucy, Ethel, Captain, Farmhouse, Bunny
Unpack Box Contents Carefully For Each Chair:
6 x Steel Allen
Screws
(includes 2 extra)
Assembly Instructions:
1 Lay seat upside down
on a soft surface
Washer
Place Cap, then washer
3
on Allen screw (Repeat 4x)
4 x Caps
Cap
4x Steel
Washers
1 x Allen Wrench
(Provided)
1 x Seat
Tube
Slide the bent part of legs into the seat
2
tubes. The taller (higher) portion of the leg
goes in front of the seat.
x4
2 x Legs
Tighten all four screws,
5
two at each leg, until they are
ush with the leg surface.
Tighten allen screws with
4
cap (from step 3) at each seat tube,
until they are ush with the leg surface
and the legs are secure.
Sit down, relax. Breathe deeply, feel your
6
senses heightening. Pay attention to your body,
notice yourself calming down, and enjoy your
new Bend Chair.
BENDGOODS.COM
x1
Loading...