®
speaker bravo
2
Contents
english
françis
español
5
19
33
3
4
Product Overview
Thanks for purchasing the bem wireless Speaker Bravo! This
speaker is Bluetooth ready and easy to use, so you’re never more
than a couple minutes away from listening to your favorite music.
But to make sure you get the best possible results from your new
Speaker Bravo Bluetooth speaker, please thoroughly read and
carefully follow all instructions in this User Guide. This short guide
explains everything you need to know to start using your speaker.
Please keep this User Guide in a convenient location for future
reference and visit bemwireless.com for additional information.
Package contents:
Speaker Bravo x 1
Auxiliary (AUX) Cable x 1
Micro USB Charging Cable x 1
USB AC Adaptor x 1
User Guide x 1
If any of these were missing or damaged, please visit
bemwireless.com to obtain replacement.
Compatibility
All devices enabled with Bluetooth technology, including iPhones,
iPads, iPods, smartphones, laptops, tablets and more
5
Meet Your New Speaker Bravo
Before learning about your Speaker Bravo, take a moment to look
it over and familiarize yourself with its features.
Product Interface: The Speaker Bravo
1 2 3 4 5 6
7 8
1. Bluetooth Indicator LED
2. Charging Indicator LED
3. Power
4. Volume Down (-)
5.Play/Pause
6. Volume Up (+)
7. Micro USB Port
8. AUX IN Port
6
Getting Started
We know you’re excited to start using your new Speaker Bravo.
And you should be. Luckily, these three easy steps will get you up
and running quickly.
Step 1: Charge It
Connect your Speaker Bravo to a wall outlet using the USB AC
adaptor and the micro USB charging cable or to a PC/laptop
using the micro USB charging cable. The charging Indicator LED
will light red while charging and will turn off when the speaker is
fully charged. Please allow approximately 2 hours to fully charge.
You may use your Speaker Bravo while it’s charging. (Approx. 3.5
hours).
7
Step 2: Connect it
Bluetooth
When your Speaker Bravo is fully charged or plugged into a
wall outlet or PC/laptop, pair it with your smartphone or other
Bluetooth enabled device.
1. Press the POWER button to turn on the speaker. The blue
Bluetooth Indicator LED will ash rapidly.
2. Activate Bluetooth on your smartphone or other Bluetooth
enabled device (refer to your device user guide for details).
Your smartphone/device will now begin searching for Bluetooth
devices.
3. When your smartphone/device nishes searching, select
“Speaker Bravo” from the device list. When connected, a tone
will sound and the blue Bluetooth Indicator LED will ash slowly.
After initial pairing, “Speaker Bravo” will appear in your device
list and a connection will automatically be established when the
speaker is turned on and Bluetooth is activated on your device.
The blue Bluetooth Indicator LED may ash rapidly at rst,
but when a successful Bluetooth connection has been made a
tone will sound and the blue Bluetooth Indicator LED with ash
slowly.
NOTE: When you end the Bluetooth connection from your
device, the blue Bluetooth Indicator LED will begin to ash
rapidly again.
8
Auxiliary
Your Speaker Bravo can also connect to audio devices that are
not Bluetooth enabled. Connect your device to your Speaker
Bravo using an auxiliary (AUX) cable (included) by inserting one
end of the plug into the AUX IN port on your Speaker Bravo and
the other end into your device as specied.
Step 3: Play it
Use your device to nd the music you love. Hit play on your
device (you can play/pause on the Speaker Bravo after initially
playing from your device). Enjoy your music.
Operation Details
The below instructions will help you get the most use out of your
Speaker Bravo.
Power on / Power off
Press the POWER button to turn on your Speaker Bravo. The blue
Bluetooth Indicator LED will ash rapidly.
Press the POWER button to turn off your Speaker Bravo. No
chime will sound when the unit is turned off, but the Bluetooth
light will stop ashing.
NOTE: To preserve battery life, the speaker will automatically
power off if not connected to Bluetooth for approximately
9
Music Control
1. On your Speaker Bravo: Press the PLAY/PAUSE button to play/
pause your music after initially playing from your device.
2. On your device: Play, pause, skip and otherwise control your
music as you normally would.
Volume Control
1. On your Speaker Bravo: Repeatedly press the VOLUME UP (+)
button to increase the volume incrementally or hold the VOLUME
UP (+) button to steadily increase the volume. Repeatedly
press the VOLUME DOWN (-) button to decrease the volume
incrementally or hold the VOLUME DOWN (-) button to steadily
decrease the volume.
2. On your device: Adjust the volume of your music as you
normally would.
NOTE: When maximum volume is reached, the VOLUME UP (+)
button will no longer increase the volume if pressed or held. If the
VOLUME DOWN (-) button is pressed often enough or held long
enough, the speaker will stop producing sound until the volume is
increased again, but the speaker will remain on and the music will
continue to play.
10
Troubleshooting
Your Speaker Bravo is designed to operate easily and reliably.
However, problems can arise from time to time. If you need a little
help, check out these common issues and solutions.
Will Not Turn On
Pairing is unsuccessfully after multiple attempts
• Your Speaker Bravo may not be charged. Please charge for
2 hours.
• Make sure to rmly press the POWER button.
Bluetooth Won’t Connect
• Make sure your Speaker Bravo is attempting to pair with
your Bluetooth device (blue Bluetooth Indicator LED is
ashing rapidly).
• Make sure the Bluetooth function on your smartphone or
other Bluetooth enabled device is activated.
• Make sure you are within Bluetooth connectivity
range (40 feet).
Poor Sound Quality/Volume
• Make sure your Speaker Bravo is sitting on a level surface.
• Make sure your Speaker Bravo is facing outward and
is unobstructed
• Make sure the volume on your Speaker Bravo and
your device are at your desired level.
If issues persist, you can nd additional suggestions
and technical support at bemwireless.com/support.
11
Maintenance
To keep your Speaker Bravo working well and looking sharp,
simply wipe with a dry cloth as needed. Do not use cleaning
agents as they may damage the nish.
Technical Specications
Note: All specications are subject to change without notice
Product Name Speaker Bravo
Model Number BE20001
Music Time 6-8 hours with music at 50%
Bluetooth V4.0 with auto pairing
Power Supply USB AC IN and MICRO USB
Dimensions 188x68x69 mm
Battery 2000mAh rechargeable Lithium Ion
Bluetooth Range 40 Feet
12
Stay in touch!
For questions, comments, or to purchase additional bem wireless
products, go to: bemwireless.com
You can also follow us at:
facebook.com/bemwireless
twitter.com/bemwirelessco
youtube.com/bemwireless
13
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received,
including interference that may cause undesired
operation.
2. Changes or modications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
14
Loading...