ALEXANDER 4200
CRIB/BED ASSEMBLY
INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB.
KEEP THE INSTRUCTIONS FOR FUTURE USE.
Barry Imports East Corp.
165 Oval Drive,
Islandia,
Instructions for Crib Model:
ALEXANDER
SYDNEY
4200
4400
NY 11749, USA
This crib has been designed for your child’s comfort and your convenience.
Quality material and workmanship have gone into this crib which will provide a
sound and comfortable bed for your baby if properly assembled and maintained.
For the security of your child be sure to follow the assembly instructions exactly.
A periodic check should be made of all bolts and screws, which should be
tightened if needed.
Moisture and heat are harmful to the finish; for this reason use extreme caution
when a vaporizer is in use. Some types of soft plastic toys that come into contact
with finish materials could also be harmful to the finish on your furniture.
This crib conforms to applicable regulations promulgated by the Consumer
Product Safety Commission.
Page 1/14
WARNING:
To help prevent strangulation tighten all fasteners. A child can trap parts of the
* When child is able to pull to a standing position, set mattress to lowest position
Failure to follow these warning and the
assembly instructions could result in serious injury or death.
■
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed
on their backs to sleep, unless otherwise advised by your physician.
■
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never
place additional padding under an infant.
■
Infants can suffocate in gaps between crib sides and a mattress that is too
small.
STRANGULATION HAZARD:
◆
Strings can cause strangulation! DO NOT place items with a string around a
child’s neck, such as hood strings or pacifier cords. DO NOT suspend strings
over a crib or attach strings to toys.
◆
body or clothing on loose fasteners.
◆
DO NOT place crib near window where cords from blinds or drapes may
strangle a child.
FALL HAZARD:
and remove bumper pads, large toys and other objects that could serve as steps
for climbing out.
* Stop using crib when child begins to climb out or reaches the height of 35 in.
(89 cm).
Page 2/14
•
Never use plastic shipping bags or other plastic film as mattress covers because
Check this product for damaged hardware, loose joints, loose bolts or other
fasteners, missing parts, or sharp edges before and after assembly and frequently
during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if
any parts are missing, damaged or broken. Contact Barry Imports East Corp. for
replacement parts and instructional literature if needed. DO NOT substitute
parts.
•
If refinishing, use a non-toxic finish specified for children’s products.
•
they can cause suffocation.
•
Do not use a water mattress with this crib.
•
Follow warnings on all products in a crib.
•
This crib conforms to applicable regulations promulgated by the Consumer
Product Safety Commission.
CAUTION:
Any mattress used in this crib shall be at least
27 1⁄4 inches (69cm) by 51 5⁄8 inches (131cm) with a
thickness not exceeding 6 inches (15cm).
Page 3/14
ALEXANDER CRIB HARDWARE
A B C D E F
G H I J N L
K M O
Alexander Crib Hardware Alexander Crib Hardware
A Allen head bolt 1-3/8" 4 I Cam screw 12
B Allen Wrench 1 J Self Locking washer 34
C Barrel Nut 12 K Small metal washer 8
D Big Metal Washer 18 L Allen head bolt 4" 12
E Screw
F Allen head bolt 2" 4 N Allen head bolt 2-3/8" 2
G Wing Nut 8 O Wood plug 2
H Phillips head screw 1-3/8" 8
(For crib drawer)
TOOLS REQUIRED
FOR ASSEMBLY:
Metric Allen Wrench( Included)
Standard Size Screwdriver
(Not included)
Quantity Quantity
12 M Allen head bolt 1"
(For convert to bed)
4
Page 4/14
SYDNEY CRIB HARDWARE
A B C D E F
G H I J N L
K M O
Sydney Crib Hardware Sydney Crib Hardware
A Allen head bolt 1-3/8" 4 I Cam screw 12
B Allen Wrench 1 J Self Locking washer 34
C Barrel Nut 12 K Small metal washer 14
D Big Metal Washer 12 L Allen head bolt 4" 12
E Screw
F Allen head bolt 2" 4 N Allen head bolt 2-3/4" 2
G Wing Nut 8 O Wood plug 2
H Phillips head screw 1-3/8" 8
(For crib drawer)
TOOLS REQUIRED
FOR ASSEMBLY:
Metric Allen Wrench( Included)
Standard Size Screwdriver
(Not included)
Quantity Quantity
12 M Allen head bolt 1"
(For convert to bed)
4
Page 5/14
Loading...