Bellfires DERBY SMALL 3 PF, YORK SMALL 3 PF, TOPSHAM LARGE 3 PF, YORK LARGE 3 PF, VIEW BELL DERBY 3 PF Supplement, Installation Instructions & Maintenance Manual

Bell• res wishes you many cosy evenings with your new Bell• res gas • re

This document is an essential part of your gas • re. Read it carefully before

installation and use of the gas • re and keep it in a safe place!

Serial number:

Production date:

"PREMIUM FIRE"

SUPPLEMENT

INSTALLATION INSTRUCTIONS &

MAINTENANCE MANUAL

DERBY LARGE 3 PF DERBY SMALL 3 PF

TOPSHAM LARGE 3 PF

YORK LARGE 3 PF YORK SMALL 3 PF

VIEW BELL DERBY 3 PF

VIEW BELL SMALL 3 PF

VIEW BELL TOPSHAM 3 PF

VIEW BELL YORK 3 PF CORNER BELL DERBY 3 L/R PF CORNER BELL SMALL 3 L/R PF

CORNER BELL TOPSHAM 3 L/R PF

CORNER BELL YORK 3 L/R PF

Gas • replace with a closed combustion system

3

English

Installation instructions

BELLFIRES GAS FIREPLACE WITH CLOSED COMBUSTION SYSTEM:

Derby Large 3 PF (Premium Fire) (DYL3 PF)

Derby Small 3 PF (Premium Fire) (DYS3 PF)

Topsham Large 3 PF (Premium Fire) (TSL3 PF)

York Large 3 PF (Premium Fire) (YKL3 PF)

York Small 3 PF (Premium Fire) (YKS3 PF)

View Bell Derby 3 PF (Premium Fire) (VWBDY3 PF)

View Bell Small 3 PF (Premium Fire) (VWBS3 PF)

View Bell Topsham 3 PF (Premium Fire) (VWBTS3 PF)

View Bell York 3 PF (Premium Fire) (VWBYK3 PF)

Corner Bell Derby 3 L/R PF (Premium Fire) (CBDY3 L/R PF)

Corner Bell Small 3 L/R PF (Premium Fire) (CBS3 L/R PF)

Corner Bell Topsham 3 L/R PF (Premium Fire) (CBTS3 L/R PF)

Corner Bell York 3 L/R PF (Premium Fire) (CBYK3 L/R PF)

IMPORTANT !

For the installation of your appliance, use both installation instructions supplied:

1. The (basic) installation instruction, with one of the following titles:

• DERBY LARGE 3 CF/LF

• DERBY SMALL 3 CF/LF

• TOPSHAM LARGE 3 CF/LF

• YORK LARGE 3 CF/LF

• YORK SMALL 3 CF/LF

• VIEW BELL DERBY 3 CF/LF

• VIEW BELL SMALL 3 CF/LF

• VIEW BELL TOPSHAM 3 CF/LF

• VIEW BELL YORK 3 CF/LF

• CORNER BELL DERBY 3 L/R CF/LF

• CORNER BELL SMALL 3 L/R CF/LF

• CORNER BELL TOPSHAM 3 L/R CF/LF

• CORNER BELL YORK 3 L/R CF/LF

2. The “Premium Fire” installation instruction, which supplements the above installation instructions. This installation instruction has

been supplied because the appliance has been ﬁ tted with a “Premium Fire” double burner.

4

English

Installation instructions

5

English

Installation instructions

The installation must only be carried out by a

“Gas Safe Register” registered installation engineer.

IMPORTANT

SUPPLEMENT TO THE CONTENTS

Page

1. INSTALLATION INSTRUCTIONS .............

....

......................

....................

.. 7

1.7.6 Placing the ceramic log set, ‘ﬁ re glass’,

embers and decorative ash ................................

..................

.........

.. 10

4A. DISASSEMBLY AND ASSEMBLY OF THE BURNERS AND MESH GRATES

REPLACING THE AMBIENT LIGHTS ....................................................... 25

7. TECHNICAL DETAILS AND REGULATIONS .

....................

.......

.........

....... 39

8. REPLACEMENT PARTS LIST .......................................................

....

....... 41

6

English

Installation instructions

7

English

Installation instructions

Figure 23A: Module (Light)

The appliance is ﬁ tted with a 230V AC connection and may only be connected to an earthed socket. The appliance has ambient lighting.

SUPPLEMENT TO CHAPTER 1: INSTALLATION INSTRUCTIONS

Page 56:

Appliance Module (light) 230V AC

Receiver 6V DC (via the Important: Do Remote control 5-pole cable not place batteries of the Module in the receiver! (Light))

Hand transmitter 1x 9V Block battery

Remote control

Electrical connections and batteries:

8

English

Installation instructions

Figure 23B: Electrical connections Receiver and Module(Light)

Upon delivery of the appliance, the electrical connections of the gas regulator block and the receiver are already assembled.

The Module(Light) is separately delivered with the appliance. This component is to be electrically connected during the installation according to the following Figure 23B and 23C.

Attach the earth cable (yellow/green) to a metal part on the inside of the operating unit, with the help of the existing screw.

3 wire cable 230 VAC

Module(light) → Ambient Lamps (2x 25W)

RESET - button

Thermocouple voltage/current OUT - connection (yellow)

Thermocouple voltage/current IN - connection (red)

5 wire cable 6 VDC MODULE receiver → Module(light)

8 wire cable 6 VDC Receiver → Gas regulator block

Module(light)

230 VAC

Receiver

2 wire cable 6 VDC AUX receiver → Gas valve “rear burner”

230 VAC Appliance power cable 3 wire cable

Earth cable

(yellow / green) Attach this cable to a metal part of the operating unit.

Do not place batteries in the receiver!

9

English

Installation instructions

Figure 23C: Connecting 5 wire cable 6VDC on MODULE connection of the receiver

Figure 23D: Built-in operating unit Position Receiver, Module(Light) and Gas regulator block

(Components are in the picture not yet electrically connected!)

Built-in operating unit

Receiver

Module(Light)

Rating plate

Gas regulator block

Attach the Earth cable (yellow / green) to a metal part on the inside of the operating unit.

10

English

Installation instructions

Page 64:

1.7.6 Placing the ceramic log set, ‘ﬁ re glass’, embers and decorative ash. For appliance ﬁ tted with the "Premium Fire" (PF) double burner:

The construction of the ceramic log set, "ﬁ re glass", embers and decorative ash for an appliance with a "Premium Fire (PF) NATURAL GAS double burner is the same as for a Premium Fire (PF) PROPANE/BUTANE double burner.

The appliance is supplied with

• Ceramic log set ; See Log Nos. 14 to 25 below.

• "Fire glass Black"

• "Fire glass Dark Amber"

• Embers

• Decorative ash

°

Ceramic log set; Logs nos. 14 to 25

°

Embers; E

°

Decorative ash; A

11

English

Installation instructions

• "Fire glass Black

• "Fire glass Dark Amber"

• Embers; E

12

English

Installation instructions

• Decorative ash; A

Important : • Place the log set, ‘ﬁ re glass’, embers and decorative ash, carefully on and around the main burners, as indicated by the speciﬁ cations mentioned in this chapter.

• Do not place "ﬁ re glass", embers or decorative ash on or against the pilot light burner.

• To prevent this, the pilot light is ﬁ tted with a pilot light cap. Never remove this cap!

• Ensure that the pilot light is always able to burn freely over the main burner. Proper ignition of the main burner will only be guaranteed if this is the case. Not adhering to these stipulations can give rise to dangerous situations.

• Ensure that the pilot light is always easily visible.

• The burner bed (with '"ﬁ re glass", embers and decorative ash) and the logs construction may not be changed.

• Only use materials supplied! This has been approved and the quantity is deﬁ ned per appliance.

• Replacement parts are available through your dealer.

• Placement may only be carried out by an authorised person.

Remove the glass from the appliance, in accordance with the speciﬁ cations in Chapter 4; DISASSEMBLY / ASSEMBLY OF THE GLASS. See (basic) installation instructions.

13

English

Installation instructions

If necessary repair the ambient lighting.

See Chapter 4A: DISASSEMBLY AND ASSEMBLY OF THE BURNERS AND MESH GRATES - REPLACING THE AMBIENT LIGHTING. Only use original ambient lights.

Check the operation of the ambient lighting/dimmer with the remote control. See operating instructions; Operation light / dimmer

1.7.6.1 Ceramic log set + ‘ﬁ re glass’ + embers + decorative ash

1 IMPORTANT: Check the presence of the three burner ﬁ xing bolts. See photo.

14

English

Installation instructions

2 Place burner log No. 16 carefully on the burner - right.

Check ﬁ rst if the "Arrow", on the underside of the log, is pointing up.

Check that the underside of the log has free space on both end faces of ± 5 mm with respect to the metal burner.

Burner log No. 16 = Art. no. 340021 (legible on the underside of the log)

Underside of log

Underside

± 5 mm

Burner

± 5 mm

Underside of log

Underside

Burner

15

English

Installation instructions

3 Place burner log No. 14 carefully on the burner - left.

Check ﬁ rst if the "Arrow", on the underside of the log, is pointing up.

Burner log No. 14 Art. no. 340019 (legible on the underside of the log)

Check that the underside of the log has free space on both end faces of ± 5 mm with respect to the metal burner.

Underside of log

Underside

± 5 mm

Burner

± 5 mm

Underside of log

Underside

Burner

16

English

Installation instructions

4 Place burner log No. 15 carefully on the burner - middle (with the pilot light).

Burner log No. 15 = Art. no. 340020 (legible on the underside of the log)

Check that the pilot light remains visible.

17

English

Installation instructions

5 Place the charcoal part No. 23 (= 1x Art. no. 340028) under the Right burner, around the venturi.

6 Place the charcoal part No. 24 (= 1x Art. no. 340029) under the Left burner, around the venturi.

18

English

Installation instructions

8 Sprinkle the ‘Fire glass Black’ evenly on the grate, left and right of the mesh grate.

7 Sprinkle the ‘Fire glass Dark Amber’ evenly on the mesh grate, around the burners. Note: Put no "ﬁ re glass" on or against the pilot light burner! Note: Put no ‘ﬁ re glass’ under burner logs No. 14, 15 and 16, where these are supported by the mesh grate.

Note! Do not sprinkle "Fire glass Black"

on the mesh grate, around the burners. ‘Fire glass Black’ blocks the light too much.

19

English

Installation instructions

9 Set the light intensity of the ambient lighting/dimmer to max. on the remote control. See operating instructions; Operation light / dimmer Check that the "ﬁ re glass" is distributed evenly and that the light intensity is the same everywhere. Adjust the distribution of the "ﬁ re glass" if necessary.

10 Place log No. 18 (= 1x Art. no. 340023).

20

English

Installation instructions

11 Place charcoal part No. 21 (= 1x Art. no. 340026).

12 Place log No. 17 (= 1x Art. no. 340022).

13 Place branch No. 19 (= 1x Art. no. 340024).

21

English

Installation instructions

14 Place branch No. 20 (= 1x Art. no. 340025).

15 Place charcoal part No. 22 (= 1x Art. no. 340027).

22

English

Installation instructions

16 Place 3x charcoal parts No. 25 (= 3x Art. no. 340030).

17 Break the embers supplied in half and distribute the parts along the side on the grate (around the mesh grate).

Note: Do not place any embers on the mesh grate. Embers will block the light! Note: Put no embers on or against the pilot light burner!

23

English

Installation instructions

19 Check that the pilot light burner is easily visible from the right hand side of the log set.

18 Decorative ash: Carefully distribute a small amount of decorative ash over the entire bottom.

Pilot light position

Pilot light Pilot light

24

English

Installation instructions

Figure 24: Log set Set-up of Natural gas and propane/butane burner - "Premium Fire"

IMPORTANT:

• Do not put any "ﬁ re glass" or embers in front of the pilot light burner

• Do not sprinkle decorative ash on the pilot light burner

• Keep the burner oriﬁ ces free

• Check that the pilot light burns properly

• The pilot light must be able to burn freely over the burner

Proper ignition of the main burner will only be guaranteed if this is the case!

When the ceramic logs, "ﬁ re glass" and embers have been placed, the glass can be assembled on the appliance once more in accordance with the speciﬁ cations in Chapter 4: DISASSEMBLY / ASSEMBLY OF THE GLASS

20 The ceramic log set construction, "ﬁ re glass", embers and decorative ash is completed.

20

25

24

19

15

16

18

23

14

17

21

22

25

English

Installation instructions

SUPPLEMENT TO CHAPTER 4: DISASSEMBLY / ASSEMBLY OF THE GLASS.

4A DISASSEMBLY AND ASSEMBLY OF THE BURNERS AND MESH GRATES REPLACING THE AMBIENT LIGHTS

Carefully remove the log set, burners and mesh grates in the following order:

1. Complete log set ‘Premium Fire’

2. Burner log No. 16

26

English

Installation instructions

3. Log No. 17

4. Burner log No. 14

5. Branch No. 19

27

English

Installation instructions

6. Burner log No. 15

7. Branch No. 20

8. Log No. 18

28

English

Installation instructions

9. Log No. 21

10. Charcoal part No. 24

11. Charcoal part No. 23

12. Charcoal part No. 25 (3x)

29

English

Installation instructions

The three burners are all ﬁ xed with just one hexagonal bolt. When unscrewing the burner ﬁ xing bolts, use socket spanner no. 7.

13. Disassemble and remove the burner - right.

30

English

Installation instructions

14. Disassemble and remove the burner - middle.

15. Disassemble and remove the burner - left.

31

English

Installation instructions

Use working gloves when removing the mesh grates.

16. Carefully remove the mesh grate - left.

17. Carefully remove the mesh grate - right.

32

English

Installation instructions

18. Clean the light compartment and gas injectors with a vacuum cleaner.

Replacing the ambient lights.

Only use original Bellﬁ res ambient lamps: Art. no. 333748:

Ambient lamp; 230-240V - 25W - E14 - 300"C. - Colour: Amber

19. Remove the plug of the appliance from the socket.

33

English

Installation instructions

21. Carefully screw the new lamp into the ! tting.

20. Carefully unscrew the defective lamp from the ! tting.

Screw the ambient lamps fully into the ﬁ tting"

34

English

Installation instructions

22. Replace the plug of the appliance into the socket.

23. Check the operation of the ambient lighting/dimmer with the remote control.

See operating instructions; Operation light / dimmer

Use working gloves when placing the mesh grates.

Carefully place the mesh grates, burners and log set in the following order:

24. Carefully place the mesh grate - left.

25. Carefully place the mesh grate - right.

35

English

Installation instructions

26. Sprinkle the "Fire glass Dark Amber" on the rear of the mesh grates.

Do not let any "ﬁ re glass" fall in the grate apertures.

36

English

Installation instructions

Fix each burner with the hexagon bolt supplied. Use socket spanner no. 7 to do this. Not mounting these ! xing bolts can give rise to a dangerous situation. Prevent this at all costs!

27. Place and assemble the burner - left. Press the burner down ﬁ rmly, and mount the ﬁ xing bolt.

37

English

Installation instructions

28. Place and assemble the burner - right. Press the burner down ! rmly, and mount the ! xing bolt.

Make sure that no “!re glass” parts are under the

lowest point of the burner! The lowest point of the burner must be able to ﬂoat above the mesh grate.

38

English

Installation instructions

30. Place the Ceramic log set, ‘! re glass’, embers and decorative ash, as indicated in chapter 1.7.6.1

29. Place and assemble the burner - middle. Press the burner down ! rmly, and mount the ! xing bolt.

39

English

Installation instructions

SUPPLEMENT CH. 7: TECHNICAL DETAILS AND REGULATIONS

National installation regulations:

• Gas safety installation and use regulations 1998 plus all relevant safety and building regulations concerning ! re installation

• Document J: Combustion appliances and fuel storage systems

Model : DERBY LARGE 3 PF (PREMIUM FIRE) DERBY SMALL 3 PF (PREMIUM FIRE) TOPSHAM LARGE 3 PF (PREMIUM FIRE) YORK LARGE 3 PF (PREMIUM FIRE) YORK SMALL 3 PF (PREMIUM FIRE) VIEW BELL DERBY 3 PF (PREMIUM FIRE) VIEW BELL SMALL 3 PF (PREMIUM FIRE) VIEW BELL TOPSHAM 3 PF (PREMIUM FIRE) VIEW BELL YORK 3 PF (PREMIUM FIRE) CORNER BELL DERBY 3 L/R PF (PREMIUM FIRE) CORNER BELL SMALL 3 L/R PF (PREMIUM FIRE) CORNER BELL TOPSHAM 3 L/R PF (PREMIUM FIRE) CORNER BELL YORK 3 L/R PF (PREMIUM FIRE)

Gas : NATURAL GAS : BUTANE / PROPANE

Country :

GB; G

reat Britain

/IE;

Ireland :

GB; G

reat Britain

/IE;

Ireland

Product identiﬁ cation no. : 0063CM3684 : 0063CM3684 Appliance type acc. to CE standard : C11 / C31 / C91 : C11 / C31 / C91 Appliance category : I2H natural gas G20 : I

3B/P

butane/propane G30/G31

Nominal heat input : 12.1 kW : Butane (G30) : 11.2 kW (Gross caloriﬁ c value) Propane (G31) :

9.6 kW

Nominal heat output : 9.3 kW : 7.4 - 8.6 kW Efﬁ ciency class : 1 (85%) : 1 (85%) NOx class : 5 : 5

Gas rate (max.) : 1.15 m

3

s

/hr. : Butane (G30) : 850 gr/hr.

Propane (G31) : 720 gr/hr.

Supply pressure : 20.0 mbar : Butane (G30) : 37.0 mbar Propane (G31) : 37.0 mbar

Burner pressure (max.) Hot : 14.1 mbar(*) : 29.0 mbar(*)

Burner pressure (max.) Cold : 13.4 mbar(**) : 29.0 mbar(**)

Burner pressure (min.) : 4.0 mbar(***) : 7.0 mbar(***)

Primary air inlet burner L : LR: Ø6.0 mm : LR: Ø14 x 8 mm Left-Rear and Left-Front LF: Ø3.5 mm LF: Ø14 x 8 mm

Primary air inlet burner M : MF: Ø6.0 mm : MF: Ø15 x 8 mm + Middle-Front

2x Ø3.5 mm

Primary air inlet burner R : RR: Ø6.0 mm : RR: Ø14 x 8 mm Right-Rear and Right-Front RF: Ø3.5 mm RF: Ø14 x 8 mm

40

English

Installation instructions

Model : DERBY LARGE 3 PF (PREMIUM FIRE) DERBY SMALL 3 PF (PREMIUM FIRE) TOPSHAM LARGE 3 PF (PREMIUM FIRE) YORK LARGE 3 PF (PREMIUM FIRE) YORK SMALL 3 PF (PREMIUM FIRE) VIEW BELL DERBY 3 PF (PREMIUM FIRE) VIEW BELL SMALL 3 PF (PREMIUM FIRE) VIEW BELL TOPSHAM 3 PF (PREMIUM FIRE) VIEW BELL YORK 3 PF (PREMIUM FIRE) CORNER BELL DERBY 3 L/R PF (PREMIUM FIRE) CORNER BELL SMALL 3 L/R PF (PREMIUM FIRE) CORNER BELL TOPSHAM 3 L/R PF (PREMIUM FIRE) CORNER BELL YORK 3 L/R PF (PREMIUM FIRE)

Gas : NATURAL GAS : BUTANE / PROPANE

Country :

GB; G

reat Britain

/IE;

Ireland :

GB; G

reat Britain

/IE;

Ireland

Gas regulator block (remote control) : Mertik GV 60 : Mertik GV 60 Main burner : Premium Fire 600 x 240 mm : Premium Fire 600 x 240 mm

Main burner injector L : LR: Ø1.50 mm : LR: Ø0.80 mm Left-Rear and Left-Front LF: Ø1.20 mm LF: Ø0.75 mm

Main burner injector M : MF: Ø1.30 mm : MF: Ø0.75 mm Middle-Front

Main burner injector R : RR: Ø1.50 mm : RR: Ø0.80 mm Right-Rear and Right-Front RF: Ø1.20 mm RF: Ø0.75 mm

Pilot light burner : SIT 0.145.019 : SIT 0.145.019 Pilot light burner injector : no. 36 (SIT 0.977.091) : no. 23 (SIT 0.977.150) Gas connection : 3/8” G / Ø12 mm : 3/8” G / Ø12 mm

Concentric ﬂ ue system connection : Ø100 mm - Ø150 mm or : Ø100 mm - Ø150 mm or Ø130 mm - Ø200 mm Ø130 mm - Ø200 mm

Remote control batteries

- Receiver : N/A : N/A

- Hand transmitter : 2x 1.5V AAA : 2x 1.5V AAA

Electrical connection : 230 VAC / 50 Hz : 230 VAC / 50 Hz Electrical power consumption : 50 W (max.) / IP 20 : 50 W (max.) / IP 20

Weight : See the basic installation instructions

(*) : All burners at maximum setting and appliance at the required temperature. (**) : All burners at maximum setting and appliance cold. (***) : All burners at minimum setting.

Flue gas exhaust and combustion air supply: Roof termination : Concentric ﬂ ue system Ø100 mm-Ø150 mm rigid and/or ﬂ exible. Wall termination : Concentric ﬂ ue system Ø130 mm-Ø200 mm rigid. With wall outlet, depending on the ﬂ ue construction; Ø100 mm-Ø150 mm or Ø130 mm-Ø200 mm.

Heat exchanging surface: Entire front of the appliance.

"Front Burner" = LF + MF + RF "Rear Burner" = LR + RR

41

English

Installation instructions

SUPPLEMENT CH. 8: REPLACEMENT PARTS LIST

No. Article no. Description

Main burner "Premium Fire" 600 x 240 mm Natural gas G20 / Butane/Propane G30/G31

1 3......... G20: Ø6.0 mm Left-Rear

Ø3.5 mm Left-Front Ø6.0 mm Middle-Front Ø6.0 mm Right-Rear Ø3.5 mm Right-Front

2 3......... G30/G31: Ø14x8 mm Left-Rear

Ø14x8 mm Left-Front Ø15x8 mm + 2x Ø3.5 mm Middle-Front Ø14x8 mm Right-Rear Ø14x8 mm Right-Front

3 301915 Main burner injector Natural gas; Left-Rear: Ø1.50 mm 4 334874 Main burner injector Natural gas; Left-Front: Ø1.20 mm 5 301928 Main burner injector Natural gas; Middle-Front: Ø1.30 mm 6 301915 Main burner injector Natural gas; Right-Rear: Ø1.50 mm 7 334874 Main burner injector Natural gas; Right-Front: Ø1.20 mm

8 340430 Main burner injector Butane/Propane; Left-Rear: Ø0.80 mm 9 340431 Main burner injector Butane/Propane; Left-Front: Ø0.75 mm 10 340431 Main burner injector Butane/Propane; Middle-Front: Ø0.75 mm 11 340430 Main burner injector Butane/Propane; Right-Rear: Ø0.80 mm 12 340431 Main burner injector Butane/Propane; Right-Front: Ø0.75 mm

13

341643 Handheld Transmitter Symax 2 - EU - 10 buttons Bellﬁ res

14 341644 Receiver Symax 2 - EU

15 333605 Module 230V AC (Light) 16 333912 Fuse T 2.5A 250V Module 17 333606 5-Pole cable Receiver - Module 18 333748 Ambient lighting lamp 230V AC, E14, 25W

19 341645 WIFI-box Symax 2 - Bellﬁ res

20 341647 WIFI-box cable - L= 1000 mm

21 340469 Log set (14 part) Natural gas / Butane/Propane

incl. embers and decorative ash

22 340089 ‘Fire Glass’ Dark Amber (2.5kg) 23 340091 ‘Fire Glass’ Black (1.0 kg)

24 ........... ‘Fire Glass’ Black (0.5 kg)

42

English

Installation instructions

Logs - ‘Fire Glass’ - Embers - Decorative Ash

Appliance Log set Art. no.: 340469

Set Log no.

Art. no.:

Number

* Derby Large 3 PF * Derby Small 3 PF * Topsham Large 3 PF * York Small 3 PF * Corner Bell Topsham 3 L/R PF * View Bell Topsham 3 PF

* View Bell Derby 3 PF * View Bell Small 3 PF * View Bell York 3 PF * Corner Bell Derby 3 L/R PF * Corner Bell Small 3 L/R PF * Corner Bell York 3 L/R PF

* York Large 3 PF

Embers with Decorative Glow effect ash Anthracite light grey

14

340019

1x

15

340020

1x

16

340021

1x

17

340022

1x

19

340024

1x

20

340025

1x

21

340026

1x

18

340023

1x

Bag: 50 gr.

xxxxxx

1x

Bag: 10 gr.

340031

1x

Bag: 2.5 kg.

340089

1x

Bag: 1.0 kg.

340091

1x

1½x

2x

23

340028

1x

24

340029

1x

25

340030

3x

22

340027

1x

´Fire Glass´ Black

´Fire Glass´ Dark Amber

03 - 060617 - 340641

Your Bell• res dealer