Bell QS-9004-VRZ, QS9014-124-00-04, Qolsys IQ Panel, QS9014-840-00-02, QS9014-484-00-06 How To Use Manual

How to use
my Qolsys Security
and Automation panel

Table of contents

1. How do I use Photo Frame on the Qolsys panel 3

1.1 Changing Photo Frame settings

1.2 Load new images from an SD card

2. How to add, change or delete access codes on your Qolsys panel 5

2.1 Add a user via the Qolsys IQ Panel 2

2.2 Remove a user via the Qolsys IQ Panel 2

3. How to use the Bluetooth feature on your Qolsys Panel 6

4. To set up Bluetooth disarming 7

4.1 Set up Bluetooth disarming

4.2 Remove a Bluetooth paired device

4.3 Disable all Bluetooth disarming

5. How to use the live view on your Qolsys panel 7

6. How to use the Qolsys IQ Panel 2 8

6.1 Arming in Stay mode

6.2 Arming in Away mode

7. I can’t see live views of my camera on the Qolsys panel 8

8. Antenna positioning for Qolsys panel (tabletop-mounted units) 9

9. Emergency panics 9

9.1 Police: Use when you need police assistance

9.2 Police (Silent Alarm): Use when you need police assistance

but do not want to set off the alarm

9.3 Fire: Use when you need assistance from the  re department

9.4 Auxiliary: Use when you need medical assistance

9.5 Auxiliary (Silent): Use when you need medical assistance

but don’t want to set off the alarm siren in your home

2 ‒ How to use my Qolsys Security and Automation panel

1. How do I use Photo Frame on the Qolsys panel

The IQ Panel 2 can be set to display digital photos when not in use.

1.1 Changing Photo Frame settings

Tap the top portion of your Qolsys screen to access the Settings menu. Then select:

1. Photo Frame

2. Photo Frame settings

In the Photo Frame settings section you can change the following:

Duration

Effect Lets you choose a transition effect between each image (fade to black, dissolve).

Shufe When enabled, displays pictures in either random or sequential order.

Display type Lets you choose what to display on the screen when the panel is not in use.

Photo Frame start time

Nighttime mode start time

Nighttime mode end time

Sets how long each image will show before transitioning to the next image in the library
(1, 2 or 5 minutes).

Lets you choose the amount of time to wait after the last press before starting
the selected display type (5, 10, 15, 20, 25, or 30 minutes).

Determines the time when the display, voices or chimes shut down completely
(to turn off the LCD, voices and/or chimes at night).

Determines the time when the display, voices or chimes “wake up” after sleeping
(to turn the LCD, voices and/or chimes back on in the morning).

Nighttime mode settings Lets you choose what the nighttime mode can control (display, voices and/or chimes).

3 ‒ How to use my Qolsys Security and Automation panel