Belkin RK5014 INST User Manual

RK5014 INSTRUCTIONS

RK5014 Product Inventory

Vertical Cable Manager (1)
Mounting Shoulder Washer (6)
10-32 x 1/2 Screw (6)

Installing Your RK5014 Cable Manager

1. Place vertical cable management on either side of relay rack.

2. Pass the 10-32 x 1/2 screw through the shoulder washer and the 3 center holes of your relay rack on to the
tapped insert of your vertical cable management. Hint: Start the 3 screws before tightening.

3. Tighten your screws.

.belkin.com

www

Belkin Corporation

501 West Walnut Street

Compton, CA 90220-5221, USA

Tel: [phone]; Fax: [phone]

2005 Belkin Corporation. All rights reserved.

©

All trade names are registered trademarks of respective manufacturers listed.

RK5014 Instructions Page 1 P35768

RK5014 Fully Assembled

Latch Operation

.belkin.com

www

Belkin Corporation

501 West Walnut Street

Compton, CA 90220-5221, USA

Tel: [phone]; Fax: [phone]

2005 Belkin Corporation. All rights reserved.

©

All trade names are registered trademarks of respective manufacturers listed.

RK5014 Instructions Page 2 P35768