Belkin RK4000ek Instructions Manual
RK4000ek Instructions P35779ec
EN
DE
FR
Belkin Tech Support
Europe: 00 800 223 55 460
For other languages: www.belkin.com/support
Belkin Ltd.
Express Business Park
Shipton Way, Rushden
NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk,
The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin GmbH
Hanebergstrasse 2
80637 Munich,
Germany
+49 (0) 89 143405 0
+49 (0) 89 143405 100 fax
Belkin SAS
130 rue de Silly
92100 Boulogne Billancourt,
France
+33 (0) 1 41 03 14 40
+33 (0) 1 41 31 01 72 fax
© 2005 Belkin Corporation. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
RK4000ek INSTRUCTIONS
RK4000ek Product Inventory
Corner Post (4)
3/8”(10mm)-16 x 1 Hex Head Bolt (16)
3/8”(10mm) Split Lock Washer (16)
Nut Plate (8)
Top/Bottom Panel (2)
1/4”(6mm)-20 Hex Nut (8)
M6 Screws (50)
M6 Cage Nuts (50)
Instructions
1. Take two of the U-Shaped mounting rails and place them on the floor, such that the RMU markings are
facing in opposite directions.
2. Make sure that the RMU markings start with “1” at the same end.
3. Take the bottom panel (the one without the Belkin logo) and then insert the side of the two mounting rails
onto the bottom panel. Repeat with top panel.
4. Align the bolt holes and place nut plate on inside of mounting rail, start 3/8”(10mm) bolt with lock washer
(2-times). Repeat with top panel. (Hand tighten). See Detail A.
5. Turn the rack over and repeat step 4. Make sure your U markings match on all uprights.
A
3/8”(10mm)-16 x 1
Hex Head Bolt
3/8”(10mm) Split
Lock Washer
Detail A
Nut Plate
EN
DE
FR
Belkin Tech Support
Europe: 00 800 223 55 460
For other languages: www.belkin.com/support
Belkin Ltd.
Express Business Park
Shipton Way, Rushden
NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk,
The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin GmbH
Hanebergstrasse 2
80637 Munich,
Germany
+49 (0) 89 143405 0
+49 (0) 89 143405 100 fax
Belkin SAS
130 rue de Silly
92100 Boulogne Billancourt,
France
+33 (0) 1 41 03 14 40
+33 (0) 1 41 31 01 72 fax
© 2005 Belkin Corporation. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
B
Instructions (cont’d.)
6. Stand the frame upright. This should be done with at least two people.
7. Square rack using a level or carpenter square and tighten the assembly bolts.
8. Take the 1/4” (6mm) -20 hex nut and place and tighten them over the studs inside each mounting rail. (Do
not over tighten). See Detail B.
Rack frame has to be bolted to the floor before equipment is mounted.
Detail B
1/4” (6mm) -20
Hex Nut
Loading...