Belkin P74696 User Manual

OmniView® ENTERPRISE 1U Rack-Mount Console with Built-In 8-Port KVM Switch

Belkin Tech Support

US: 310-898-1100 ext. 2263 800-223-5546 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 235 546 New Zealand: 0800 235 546

Belkin Corporation

501 West Walnut Street Compton, CA 90220-5221, USA 310-898-1100 310-898-1111 fax

Belkin Ltd.

Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax

© 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac OS and Mac are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

Belkin Ltd.

7 Bowen Crescent, West Gosford NSW 2250, Australia +61 (0) 2 4372 8600 +61 (0) 2 4372 8603 fax

Belkin B.V.

Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands +31 (0) 20 654 7300 +31 (0) 20 654 7349 fax

P74696

Control

OmniView® ENTERPRISE 1U Rack-Mount Console with Built-In 8-Port KVM Switch

Control your rack servers from a compact 1U rack-mount console

User Manual

F1DC108C

Table of Contents

1. Introduction ........................................................................................... 1

Packag e C ontents ...... ....... ....... ....... ....... ....... ....... ....... ....... ....... .... 1

2. Overview ............................................................................................... 2

Feature Ove rview .......................................................................... 2

Equipm ent Requirem ents ........ ....... ....... ....... ....... ....... ....... ....... ...... 4

Operat ing System Re quirement s .... ....... ....... ....... ....... ....... ....... ...... 5

Unit Disp lay Diag ra ms . ....... ....... ....... ....... ....... ....... ....... ....... ....... ... 6

LCD Displ ay Butto ns ...... ....... ....... ....... ....... ....... ....... ....... ....... ....... 7

Specif ication s ............................................................................... 8

3. Installation ............................................................................................ 9

Pre -Conf ig urati on ..... ....... ....... ....... ....... ....... ....... ....... ....... ....... ...... 9

Instal ling the Ra ck -Moun t C onsole

KVM Switc h i nto a Serve r R ack .................................................... 10

Connec ting Serve rs to the Rack -Mount

Consol e K VM Switc h ( PS/2 Conne ction) .... ....... ....... ....... ....... ....... . 13

Connec ting Serve rs to the Rack -Mount

Consol e K VM Switc h ( USB Connec tion) .. ..... .. ..... .. ..... .. ..... .. ..... .. ... 1 4

Connec ting Multi ple KVM Dev ices

(Daisy -Chaini ng) .......................................................................... 16

DIP Switc h C onfig ur ation Ch art ....... ....... ....... ....... ....... ....... ....... ... 17

Powering up the Systems .................................................................... 20

4. Using your Rack-Mount Console KVM Switch ....................................... 21

Select ing a Serve r U sing Keybo ard H ot Key Comman ds ................ 21

AutoSc an Mode ..... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 21

Intell iVie w Graphi cal On-Scree n D isplay Men u C ontrol ... ....... ....... . 22

The AutoU pdate Fi rm ware Update U ti lity ..................................... 35

5. Troubleshooting .................................................................................. 43

6. Glossary .............................................................................................. 44

7. Information ......................................................................................... 46

Introduction Package Contents

section

Package Contents:

1U Rack-Mount

Console with

KVM Switch

Registration

Card

Congratulations on your purchase of this Belkin ENTERPRISE 1U Rack-Mount Console with Built-In 8-Port KVM Switch (the Rack-Mount Console KVM Switch*). Our diverse line of KVM solutions exemplifies the Belkin commitment to delivering high-quality, durable products at a competitive price.

Designed to give you control over multiple servers, the Rack-Mount Console KVM Sw itch provides an excellent solution for the server administrator. It outperforms any other rack-mount console with KVM switch on the market. Engineered to work with the most advanced server room and laboratory environments, the Rack-Mount Console KVM Switch offers:

• Dual-rail system with 1U compact design

• Video resolution support of up to 1280x1024

• PS/2 and USB mix-and-match support for output devices

• Multi-console support

• IntelliView™ Graphical On-Screen Display (OSD)

• Server and server-group naming

• Multi-level security

• Server connection status and diagnosis

• Flash-upgradeable firmware

• Dual-port connectors (cables sold separately)

• Belkin Two-Year Warranty

• Free technical support

• 17-inch LCD

Rack-Mount

Brackets with

Screws

User

Manual

IEC Power

Cable

Quick

Installation Guide

Two

Keys

Overview Feature Overview

This User Manual will provide details about your new Rack-Mount Console KVM Switch, from installation and operation to troubleshooting—in the unlikely event of a problem.

For quick and easy installation, please refer to the Quick Installation Guide included in your packaging.

Thank you for purchasing the Belkin OmniView ENTERPRISE 1U Rack-Mount Console with Built-In 8-Port KVM Switch. We appreciate your business and have confidence that you will soon see for yourself why Belkin is the number one-selling brand in KVM switches worldwide.

*For simplicity, the 1U Rack-Mount Console with Built-In 8-Port KVM Switch will be referred to as the “Rack-Mount Console KVM Switch” in this User Manual.

Feature Overview

• Quad-Bus Technology

Multiple KVM Switches and KVM Expanders can be daisy-chained together to

allow up to four consoles to simultaneously control up to 256 servers.

• IntelliView Graphical On-Screen Display (OSD) with Mouse Support

The IntelliView OSD simplifies server management by allowing you to

assign individual names to each connected server in your configuration and to organize the servers into groups. The OSD also provides a visual means of switching between servers, checking server-connection status, assigning security levels to each server, and setting the time interval for the AutoScan function.

• AutoUpdate™

The exclusive AutoUpdate system from Belkin and flash-upgradeable firmware

allow you to obtain the latest firmware upgrades for your Rack-Mount Console KVM Switch. These upgrades allow you to maintain consistent compatibility with the latest devices and servers. Firmware updates are free for the life of your Rack-Mount Console KVM Switch. Please visit us at www.belkin.com for complete update information and support.

Overview Feature Overview

• Video Resolution

The LCD supports SXGA video resolutions of up to 1280x1024.

• Hot Keys

Hot key functionality allows you to select a desired port using designated key

commands. By using a simple hot key sequence on your keyboard, you can select one server from as many as 256 servers, instantaneously.

• Reprogrammable Hot Key Initiator Sequence

The Rack-Mount Console KVM Switch allows you to select up to six alternate

keys to initiate hot key commands. These settings can be configured through the IntelliView OSD. For more information, please refer to the “IntelliView OSD Features” section.

• AutoScan

The AutoScan feature allows you to set your Rack-Mount Console KVM

Switch to scan and monitor the activities of all connected servers, one by one. The time interval allotted for each server can be defined or adjusted through the On-Screen Display (OSD) menu.

• High-Density Server Ports

The Rack-Mount Console KVM Switch features high-density, 50-pin, SCSI 2

connectors. These connectors allow you to connect two servers to one port on the Rack-Mount Console KVM Switch, reducing the amount of cabling in your server rack. They also allow the Rack-Mount Console KVM Switch to fit into a compact, 1U-height rack-mount case.

• Micro-Cabling Technology

Servers can be attached to the Rack-Mount Console KVM Switch via their

PS/2 or USB interfaces by using custom OmniView ENTERPRISE Dual-Port Micro-Cabling. With a 60% reduction in cable size, Micro-Cabling simplifies cable management and allows for greater airflow in your racks, increasing the lifespan of your equipment. These cables are offered in both PS/2 and USB styles [Belkin part numbers F1D9400-XX (PS/2 style) and F1D9401-XX (USB style)].

section

Overview Equipment Requirements

Equipment Requirements

F1D9400-XX (PS/2)

Cables

Connecting the Rack-Mount Console KVM Switch to a server requires custom Belkin OmniView ENTERPRISE Dual-Port Micro-Cabling.

To connect multiple KVM Switches together, a custom Belkin OmniView ENTERPRISE Daisy-Chain Cable is required.

OmniView ENTERPRISE Dual-Port Micro-Cabling

F1D9400-XX (PS/2 Style) F1D9401-XX (USB Style)

F1D9401-XX (USB)

OmniView ENTERPRISE Daisy-Chain Cable

F1D9402-XX

(-XX denotes length in feet)

Overview Operating System Requirements

Operating System Requirements

The Rack-Mount Console KVM Switch is compatible with servers running on the following platforms:

• Windows® 98, 2000, Me, NT®, XP, 2003

• Red Hat® Linux® 7.0, 7.1, 7.2

• Mandrake

• Linspire

• Novell® NetWare® 5.x, 6.x

• MAC OS® X v10.x

section

Overview Unit Display Diagrams

Unit Display Diagrams

OmniView ENTERPRISE 1U Rack-Mount Console with Built-In 8-Port KVM Switch

LCD Handle

Mouse

Drawer Handle

LCD

Keyboard

Flash Port

Daisy-Chain

Port, In

Front Bracket

Front View

LCD Display

Buttons

Keylock

Power Switch

Optional Console

PS/2 or USB Ports

Daisy-Chain

Port, Out

4 High-Density, 50-Pin, SCSI

2-Style Computer Ports, each

Supporting 2 Servers

IEC Power Connector

Back View

Overview LCD Display Buttons

LCD Display Buttons

The Rack-Mount Console KVM Switch includes six buttons on the LCD panel that allow you to adjust the settings on the display. The buttons are recessed in the panel to prevent accidental activation when the LCD is folded down and stored. You will need to use a fine-tipped object to access the buttons. The table below provides the list of control functions for each button.

section

Activate settings menu; select/unselect

Exit to previous screen

Move cursor down; change value

Move cursor up; change value

Automatically adjust LCD settings

Power LCD on/off

Overview Specifications

Specifications

Part No.: F1DC108C

Max. Number of KVM Switches in Daisy-Chain: 16

Max. Number of Servers in Daisy-Chain: 248

Keyboard Emulation: PS/2 & USB

Mouse Emulation: PS/2 & USB

Server Ports: High-density, 50-pin, SCSI 2-style

Max. LCD Resolution: 1280x1024 (SXGA)

Keyboard Type: 106-key, PS/2-compatible

Mouse Type: PS/2-compatible touch pad

Enclosure: Metal enclosure

Dimensions: 19 (W) x 1.75 (H) x 29 (L) in.

Rack Depth: Min - 23 in., Max + 42 in.

Weight: 37.9 lbs. (17.2kg.)

Operating Temp: 32° to 104° F (0~40° C)

Storage Temp: -4° to 140° F (-20~60° C)

Humidity: 0-80% RH, non-condensing

Maximum Altitude: 10,000 ft. (3,048m)

Power: 90–264VAC @ 47–63Hz

Warranty: 2-Year Limited Warranty

connector (requires Belkin OmniView ENTERPRISE Dual-Port Micro-Cabling)

(482.6 x 44.5 x 736.6mm)

(Min - 584.2mm, Max + 1066.8mm)

NOTE: Specifications are subject to change without notice.

Installation Pre-Configuration

Pre-Configuration

The enclosure of the Rack-Mount Console KVM Switch is designed for rack-mount configuration in a standard 19-inch server rack. Rack-mount hardware is included for a sturdy rack installation.

When deciding where to place the Rack-Mount Console KVM Switch, consider the location of your servers and the length of cables needed to connect those servers to your Rack-Mount Console KVM Switch.

Cable Length Recommendations

For PS/2 servers

We recommend that PS/2 cable length from the Rack-Mount Console KVM Switch to your servers be limited to 25 feet for best video performance. Beyond that length, the probability of video degradation increases.

For USB servers

We recommend that USB cable length from the Rack-Mount Console KVM Switch to your servers be limited to 12 feet for best video performance.

Installing the Rack-Mount Console KVM Switch into a Server Rack

The Rack-Mount Console KVM Switch includes adjustable mounting brackets ideal for installation in 19-inch racks.

Please consider the following before mounting your Rack-Mount Console KVM Switch:

a) Elevated Operating Ambient Temperature – If installed in a closed

or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the rack manufacturer’s maximum rate ambient temperature.

b) Reduced Airflow – Installation of the equipment in a rack should be

such that the amount of airflow required for safe operation of the equipment is not compromised.

c) Mechanical Loading – Mounting of the equipment in the rack

should be such that hazardous condition is not achieved due to uneven mechanical loading.

d) Reliable Earthing – Reliable earthing of rack-mounted equipment

should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit.

section

Installation Installing the Rack-Mount Console KVM Switch into a Server Rack

Installing the Rack-Mount Console KVM Switch into a Server Rack

Step 1

Remove the contents from the box.

Step 2

Place the Rack-Mount Console KVM Switch on a rack and install the rack-mount brackets.

Installation Installing the Rack-Mount Console KVM Switch into a Server Rack

Step 3

Mount the Rack-Mount Console KVM Switch to your rack or cabinet.

Step 4

Connect the IEC power cable to an active power outlet and power up the Rack-Mount Console KVM Switch.

section

Installation Installing the Rack-Mount Console KVM Switch into a Server Rack

Step 5

Unlock your Rack-Mount Console KVM Switch with keys provided.

121212

+ 34 hidden pages