Belkin P74080 User Manual

P74080 F5U209

Hi-Speed USB 2.0

External Drive Enclosure

User Manual

P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page a

P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page b

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Assembling Your Drive Enclosure . . . . . . . . . . . . . . . . . . . . . . . . .3

Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Safe Removal of the USB Disk . . . . . . . . . . . . . . . . . . . . . . . . . .10

Format the USB 2.0 External Drive . . . . . . . . . . . . . . . . . . . . . .11

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page c

P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page d

The Hi-Speed USB 2.0 External Drive Enclosure (the External Drive) is
a portable compact storage drive that incorporates the USB 2.0
(Universal Serial Bus 2.0) high-speed interface. The External Drive
provides a fast and easy way to add more storage space to your
computer. The Plug-and-Play feature gives you great convenience on
the road, the External Drive can be easily connected to your
computer by USB interface, and can even be disconnected and
reconnected while the computer is running.

Note: To enable Hi-Speed USB 2.0 mode (480Mbps), your computer
must be equipped with built-in USB 2.0 ports or a USB 2.0 host
adapter card.

INTRODUCTION

1

P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 1

SYSTEM REQUIREMENTS

2

Hardware

Notebook and desktop computer with USB 1.0 or USB 2.0 port

Operating System

Windows®98 SE, Me, 2000, or XP

P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 2

ASSEMBLING YOUR DRIVE ENCLOSURE

3

1. Remove top of the External Drive.

2. If you are installing a 31/2-inch hard drive, check to make

sure your drive is set to “Master” (see jumper setting
information printed on top of your disk drive), then
connect the 34-position data cable and 4-position
power cable.

3. If you are installing a CD/CD-RW drive, check to make

sure your drive is set to “Master”, then connect the
34-position data cable, 4-position power cable, and
4-position audio cable.

4. Choose the set of mounting holes that match the drive

you intend to use, and install at least four of the provided
mounting screws.

P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 3