Belkin P73965 User Manual

P73965 F5U224

USB 2.0 Hi-Speed

4-Port Hub

User Manual

Congratulations and thank you for purchasing the Belkin
4-Port USB 2.0 Hub (the Hub). The Hub provides four
downstream USB ports that are compatible with both USB

1.1 (low- and full-speed) devices, as well as with USB 2.0
(high-speed) devices.

This means that the Hub is “backward-compatible” with all of
your current USB 1.1 devices and also works with the next
generation of “high-speed” USB 2.0 devices. This may
include such peripherals as scanners, printers, mass-storage
devices, and high-resolution cameras. The Hub is
self-powered, which allows the cascading of devices with
additional hubs, so that up to 127 USB devices can be
connected to a single port. The Hub also provides a
multicolored status LED for each individual port, and a
master power LED that indicates the Hub is powered and
ready to use. For additional information, refer to the
“Technical Specifications” section.

Introduction

1

Please read this manual thoroughly and follow the
procedures to prevent any damage to the 4-Port
USB 2.0 Hub and/or to the connected devices.

Features

2

• Compliant with Universal Serial Bus specification 2.0
(data rate 1.5/12/480Mbps)

• Backward-compatible with Universal Serial Bus Specification

1.1 (data rate 1.5/12Mbps)

• Compatible with Windows®98SE, Me, 2000, and XP

• USB Implementers Forum (USB-IF) approval

• Plug-and-Play technology

• Support for “hot swapping” of USB devices

• Per-port over-current detection and protection

• Individual port-status indicator LEDs

• Four 480Mbps downstream ports

• Fully compatible with USB 1.1 and USB 2.0 devices

Package Contents

(1) USB 2.0-compliant 4-Port Hub: F5U224

(1) USB Device Cable

(1) AC Power Adapter

(1) User Manual