Belkin In-car Holderfor iPod User manual

User Manual

F8Z051ea/F8Z051eaBLK /F8Z097eaBLK

In-car Holder

for iPod

Mount, power, and charge your iPod as you drive

What’s in t he Box:

1. Window Mount

2. Alcohol Wipes

3. User Manual

Package Contents | 01

Step 1: To att ach the cabl e of the Belk in Auto Kit

1. Turn the In- car iPod holder upside down.

2. On the underside, toward the front of the iPod cradle, you’ll find a cable snap.

3. Thread the Auto Kit cable through here so it stays in place when you take your iPod out of the In-car iPod holder.

Installation | 02

Step 2 : Install on a wind shield

1. Clean windshield with alcohol wipe.

2. Peel off protective plastic from the suction cup.

3. Push onto windshield and turn to lock.

Installation | 03

Step 3 : To insert the iPod into the In -car

iPod holder

1. Make sure the suction cup is clear of

dust or dirt. If necessary, wipe it with a damp cloth.

2. Take off anything that may

be connected to the dock connector.

3. L ay the dock connector end

of the iPod into the bottom of the iPod cradle and gently push the iPod onto the suction cup.

4. Insert the Auto Kit connector

into the dock connector of the iPod through the iPod cradle’s bottom opening.

For safety, always make sure that the In-car iPod holder is securely resting inside your car ’s.

Installation | 04

Warranty | 05

Belkin International Inc. Limited 3-Year Product Warranty

Belkin International Inc. warrants this product against defects in materials and workmanship for three years. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of purchase may be required. This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced.

THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No Belk in dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.

BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING OR REPRODUCING, ANY PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.

Some states do not allow the exclusion or limitation of incidental or consequentialdamages or exclusion of implied warranties, so the above limitations or exclusions may not apply to you. This warranty gives you specific

legal rights, and you may also have other rights that vary from state to state.

Warning :

Do not mount this product near or over an airbag cover or deployment zone.

Cautio n:

Repeated, excessive movement or adjustment of the cradle will cause the flexible neck to fail. The flexible neck is not intended to be adjusted repeatedly. Once the cradle is positioned, adjustments should be kept to a minimum.

Vous trouverez dan s la boîte :

1. Support de montage

pour fenêtre

2. Lingettes imbibées

d’alcool

3. Manuel de l’utilisateur

Contenu de l’emballage | 07

Étape 1: Pour b rancher le câble du Kit Auto de Belkin

1. Retournez à l’envers le Support pour iPod pour la voiture.

2. Au dos, vers l’avant du support, vous trouverez une attache pour câble.

3. Insérez-y le câble du Kit Auto de façon à ce qu’il soit maintenu

fermement en place lorsque vous retirez votre iPod du Support pour iPod pour la voiture.

Installation | 08

+ 22 hidden pages