Belkin F8Z896 User Manual

LiveAction Camera Remote
User Manual LiveAction Camera Remote [show] Two AAA (LR03) batteries [show]
Install the batteries:
The Remote takes two AAA (LR03) batteries.
1. Slide the battery cover to remove it from the remote. [illustration 1, show
2. Insert the batteries, paying attention to the + and – markings inside the
battery compartment.
3. Slide the battery cover back on.
Pair the remote with your iPhone:
1. Turn on the remote using the switch on the side. [illustration 2]
2. Visit the Settings app on your iPhone. [show Settings app icon] Choose
General, then Bluetooth. Make sure Bluetooth is On.
3. Press and hold the Pair button on the remote until the green light blinks
rapidly, then release it. This should take three seconds or so.
4. LiveAction Remote will appear in the list of Bluetooth devices. Touch the
LiveAction Remote list item.
5. If your iPhone asks for a PIN, enter 0000. Your remote is now paired with
your iPhone.
Get the LiveAction app:
1. The Remote works with the Belkin LiveAction camera app. Visit the App
Store and search for LiveAction. [show LiveAction icon – get it from Lucky Diaz if you need it]
2. When you find the app, install it. (It’s free.)
Take pictures and video:
1. Open the Belkin LiveAction app.
2. Use the black button on the remote to take still pictures. Use the red button
on the remote to start and stop taking video. [illustration 3 indicating buttons]
3. Still pictures (frames of video) can be taken while recording video; just press
the black button.
Prop your iPhone with the included stand:
1. Remove the stand from the body of the remote by grasping the stand and
pulling it from the remote body. [illustration 4 with arrow pulling stand from remote body]
2. Rotate the leg of the stand to the desired angle.
3. Fit the jaws of the stand over your iPhone. The jaws will spread to grip
tightly, even over a case. [illustration 5]
Information
Belkin International, Inc., Limited 1-Year Product Warranty
What this warranty covers.
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin
product that the product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Belkin warrants the Belkin product for one year.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products. In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin.com in an amount equal to the purchase price of the product as evidenced on the original purchase receipt as discounted by its natural use.
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided to Belkin
for inspection upon Belkin’s request at the sole expense of the purchaser, or if
Belkin determines that the Belkin product has been improperly installed per the instructions provided on this guide, altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration.
This warranty is null and void if the Belkin LiveAction Camera Remote (F8z896tt) is used with any phone other than an iPhone 4.
Carefully follow these instructions. Misuse or improper installation may cause harm to your iPhone 4. Belkin is not responsible for any damage that may be done as a result of the misuse or improper installation of this product, including but not limited to use with aphone other than iPhone 4.
Loading...
+ 3 hidden pages