Experience the freedom of wireless communication
Bluetooth
™
Hands-Free Headset
For use with mobile
phones enabled with
Bluetooth
™
technology.
F8V9017
User Manual
Table of Contents
Important Information for Safe Use ..............................................2
Introduction ................................................................................5
Operation Modes ..........................................................................6
Controls and Functions..................................................................7
Operation ..................................................................................12
Appendix – A ............................................................................19
Regulatory Notices..................................................................19
Federal Communications Commission Notices............................19
Canadian Notice......................................................................20
European Community Notice ....................................................21
Wireless Notice ......................................................................22
1
Important Information for Safe Use
Note: Read this information before using the Bluetooth Hands-Free Headset.
To avoid the risk of product malfunction, product damage, or personal injury, take care to
observe these safety precautions and always use the Bluetooth Hands-Free Headset
according to the instructions for use.
Headset Care
• Never expose to liquid or immerse in water, avoid excessive humidity.
• Do not attempt to disassemble the Headset; it contains no user-serviceable parts. The
rechargeable battery is pre-installed and ready for use.
• Do not drop or throw the Headset and protect it from environments that could
scratch it. Use only a soft cloth to clean it.
• Do not expose the Headset to extremes of temperature.
• Never expose the Headset to open flames and do not dispose of in a fire.
• Do not allow children to play with the Headset. It contains small parts that could
detach to create a choking hazard.
2
Important Information for Safe Use (continued)
Driving
• Check the regulations affecting the use of hands-free devices where you drive. Only
use the Headset when and where it is safe to do so.
Operation in Special Environments
• Medical equipment and hospitals: Due to the risk of interference with medical
equipment, do not use the Headset or a mobile phone nearby without permission.
• Aircraft: To avoid interference with communication systems, turn the Headset OFF
when required to do so by airline regulations. Never use the Headset while in the air.
• If you are unsure if radio-transmitting equipment is allowed in any area, seek
authorization before turning the Headset ON.
Charging
• Only use the charger supplied with the Headset to charge the product to avoid risk of
damage or personal injury.
• The charger can only be disconnected by unplugging, so it is recommended to only
use a power socket easily accessible.
3
Important Information for Safe Use (continued)
Charging (continued)
• Ensure the charger is compatible with the AC supply available before attempting to
plug it in.
• The charger is for indoor use only. Never expose to liquid or immerse in water, avoid
excessive humidity.
Environmental Care
• Please observe local regulations regarding the disposal of your packaging materials
and the product itself. Where possible, promote their recycling.
• This product contains a rechargeable NiMH battery.
4
Introduction
Description
The Bluetooth Hands-Free Headset (Headset) is a complete audio headset supporting
the Bluetooth headset profile. The Headset is a convenient personal device providing 2way wireless audio connectivity to other Bluetooth devices such as mobile phones,
PDAs, and PCs.
The use of the Bluetooth short-range wireless standard ensures interoperation with a
wide range of other Bluetooth products.
Features
• Bluetooth v1.1-compliant with headset profile
• Boomless design for comfortable unobtrusive use
• Optimized acoustic design
• Easy-to-operate user interface
• Long talk and standby time
• Rechargeable
• Lightweight
5
Operation Modes
Operation Modes
PIN Code: Keep the 4-digit PIN code information supplied with the Headset in a safe
place. It is unique to your Headset. It will be needed for pairing.
The Headset supports these modes of operation:
• OFF—the Headset is off and cannot receive or make a connection.
• STANDBY—the Headset is ready to receive or make a connection from a paired device
within range.
• INCOMING CALL—the Headset is ready to answer a call being received.
• TALK—the Headset is actively connected to another device and communication can
be made, after answering or initiating a call.
• PAIRING—this is a special mode used to “pair” the Headset ready for use with a
companion device such as a mobile phone.
• CHARGING—the Headset can be charged by connecting the charger supplied.
6
Controls and Functions
Keypad
• One push button to switch the
Headset on/off, to select PAIRING
mode, or to initiate or answer a call
• Two switches to control
receive-volume
7
LED indicator
Volume +
Main
multifunction
button
Volume -
Charging connector
Microphone
Shown configured for wearing on the right ear.