Congratulations and thank you for purchasing the Bluetooth
Hands-Free Headset from Belkin. The Headset features the
breakthrough Bluetooth wireless technology that lets you
create efficient communications with your Bluetooth
technology-enabled phone. Please review this manual
carefully to ensure you get the most from your product.
Product Features
The Bluetooth Hands-Free Headset is compliant with
Bluetooth standard version 1.1 and provides:
• Support for the Headset and Hands-Free Profile
• Compatibility with Bluetooth technology-enabled phones
• A moldable ear hook, providing a comfortable fit with
SoftHold™ technology
• Built-in security: up to 128-bit encryption
and authentication
1
section
1
2
3
4
5
Introduction
System Requirements
Compatible with all phones enabled with Bluetooth v1.1,
including, but not limited to:
• SoftHold moldable ear hook with 3 interchangeable earplugs
• 5V DC, 300mA Power Supply
• User Manual
• Registration Card
2
Introduction
Specifications
Model:F8T061
Bluetooth Compliance:Version 1.1
Operating Frequency:2.4 to 2.4835GHz
Spread Spectrum:FHSS (Frequency Hopping
Modulation:GFSK (Gussian Frequency
RF Output: 0 dBm, Class 2
Sensitivity:< 0.1% BER at -81 dBm
Frequency Stability:+/- 10PPM
Operation Range:10m (33 ft.)*
Design:Left and right ear
Battery:Rechargeable lithium polymer
Spread Spectrum)
Shift Keying)
3
section
1
2
3
4
5
Introduction
Antenna:Integrated, 0 +/- adbi
LED Indicator:Power/Pairing
Charger:5.0V DC, 300mA
Typical Power Consumption: TX: 150mA, Rx 80mA
Dimensions:64mm (L) x 22mm (W) x 8mm (H)
Weight:0.8oz.
*10m range is dependent upon environment, number of
users, and other wireless devices within immediate proximity.
Specifications are subject to change without notice.
Introduction
Supported Profiles
The services supported by your Headset are defined as
“Profiles”. Available Profiles include:
• Hands-Free
• Headset
section
1
2
3
4
5
4
5
Getting to Know your Hands-Free Headset
SoftHold Moldable
Ear Hook
Interchangeable
Earplug
Toggle:
- Talk
- On-Off
- Volume up-down
LED Window
- Pairing
Getting to Know your Hands-Free Headset
Status Indicators
LED Status
5 quick blue flashesHeadset is being
5 quick red flashesHeadset is being
Continues blue/red flashingHeadset is in
Flashes blue once every 3 secondsHeadset paired
3 quick blue flashes every 3 secondsHeadset paired
turned on
turned off
pairing mode
but not active
and active
section
1
2
3
4
5
6
7
Before you Begin
Warning: The Bluetooth Hands-Free Headset
and charger have magnets in them that allow
them to dock with each other. Keep magnets at
least two feet away from computer hard drives,
and other magnetic storage media, monitors,
televisions, VCRs, videotapes, cameras, camera
film, credit cards, etc.
For Technology-Enabled Phones
Bluetooth
The Bluetooth Hands-Free Headset is compatible with
Bluetooth phones (version 1.1 phones).
Check for phone compatibility on page 2, or check with your
phone manufacturer to ensure Bluetooth compatibility.
Before you Begin
Charge your Headset
Your Bluetooth Hands-Free Headset is equipped with a
rechargeable lithium polymer battery and must be charged
prior to use.
1. Plug one end of the power adapter into the desktop
charger and the other end into an available 110VAC
electrical outlet.
2. Insert the Headset into the desktop charger. The
charging indicator on the charger will illuminate red.
3. Charge the Headset for approximately two hours or until
the red charger indicator light goes out.
Note: The red indicator light will be on while the Headset is
charging and will turn off when charging is complete.
section
1
2
3
4
5
8
9
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.