Belkin F8E874MSE Users Manual

HARDWARE INSTALLATION
1.
Make sure your computer is turned on
before installing the Mouse.
Connect the receiver into an available
USB port on your PC. (Fig. 3)
Your PC should automatically find new
Note:
Windows 98 SE may require you to
Switch on the power of the Wireless
Note:
If the Mouse does not sync with
Note:
While traveling, please switch off
YOUR RECEIVER
PC 486 or higher
Windows
98 SE, Me, 2000, XP
USB port
CD-ROM drive
MiniWireless Optical Mouse
USB Receiver
User Manual
2 AAA Batteries
Remove the top cover of your Mouse by
Insert 2 AAA batteries. (Fig. 2)
Replace the top cover and close.
Note:
Be sure to check polarity (+ or
– sign) and insert battery properly.
Each time you repeat this step, the
Do not put the Mouse and receiver on
Keep a distance of more than 4.9 feet
The optical sensor of the Mouse will
This is probably because the distance
Make sure that the Mouse is not placed
Your synchronizing setup may not have
notebook computer?
Check to be sure that you have disabled
system and won’t work. What should I do?
Ensure that your USB Mouse is
Check the functioning of your system’s
Check the version of your operating
Make sure that the USB port is enabled in
The radiated output power of this device is far below the
This equipment has been tested and found to comply with
This equipment generates, uses, and can radiate radio
The FCC requires the user to be notified that any changes
The wireless radio of this device complies with RSS 210
This warranty does not apply if the product has been
ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER
Australia: 1800 235 546
Australia
The Netherlands
Loading...