Belkin F8E820-PS2, F8E820-USB User Manual

Internet and Multimedia
Keyboard

Access the Internet and your e-mail with one-touch buttons

User Manual

F8E820-PS2

F8E820-USB

Multimedia Keyboard CD-ROM User Manual

System Requirements

PC 486 or higher
USB port (F8E820-USB)
PS/2 port (F8E820-PS2)
Windows®98, 98 SE, 2000, Me, XP

Hardware Installation

PS/2 Connector

1. Turn off all the power to your computer.

2. Remove the existing keyboard (if installed).

3. Plug the PS/2 connector into the keyboard port on the back of your CPU.

4. Turn on your computer.

USB Connector

1. Plug the USB connector into the keyboard port on the back of your CPU.

2. Follow the on-screen instructions to load the Microsoft®built-in HID

(Human Interface Device) driver.

2

3

Software Installation

To take full advantage of all the features of your Multimedia Keyboard, you
must uninstall any previous drivers before installing the software that comes
with the keyboard.

Note: It is not necessary to install the Belkin software if your operating

system is Windows Me or XP.

Insert the CD-ROM into the CD-ROM drive. A “welcome” dialog box
will appear on screen. Click the picture of the keyboard to install
multimedia driver.

Setup CD-ROM will automatically run the driver. If this is not the case, then
run the setup.exe file manually. This file is located in the root directory of
the setup CD.

InstallShield Wizard will appear on screen, click on “Next “. Follow the
on-screen instructions.