Belkin F7C063 User Manual

0.00 x 0.00 x 0.00

Business Unit:

Program Manager:

Packaging Engineer:

Material:

Blank Size (in):

Side Shown:

L x W x D (mm):

Unit:

Flute/Grain:

REV

Intermediate

PRINT SIDE

0 x 0 x 0

L x W x D (in):

7100-00267 Rev.A00

[119.062]

NITTO TAPE

SCREEN GLUE

Refer Artwork

7100-00267 Rev.A00

20 mm

BACK

[187.297]

[118.755]

[93.650]

[268.594]

[136.526]

QIG SLEEVE - SBS 250 gsm C1S

OUTSIDE - PRINTED SIDE

NON PRINTED SIDE

CORRUGATION DIRECTION

NON PRINTED SIDE

OUTER BOX - 29ECT/175lb E Flute SBS

OUTSIDE - KRAFT

SLEEVE - 400 gsm C2S

[462.752]

[113.506]

[228.600]

[152.399]

[73.023]

OUTSIDE - PRINT SIDE

[227.443]

[136.216]

[502.469]

[96.552]

[46.404]

Insert - 29ECT/175lb E Flute SBS

OUTSIDE - PRINT SIDE

NON PRINTED SIDE

[34.288]

[79.750]

PET 0.5 mm

QIG - 157 gsm COATED PAPER

FRONT

FCC - 80 gsm WOOD FREE PAPER

[111.418]

[147.510]

[69.109]

[738.079]

[432.971]

IN/MM

Drawing Scale 1:1

Retail Outside Dimension (Including Hang Tab)

DIE/MATERIAL SPECS:

1908.411 x 1883.265

75.134 x 74.144

Die Line File:

Conserve

Pushpak Jain

Please refer to drawing

IDL_F7C063_SWITCH V2_WEMO_US_PACKAGE

Artwork File:

vertical

RELEASE DATE:

07/25/2016

Tolerance:+/- 1/32" - 0.8mm

Blank Size (mm):

DIELINE:

This dieline works for following skus (if any):

Die Line File:

1.0 4"

.25"

2.1 9"

.946"

.175"

.5 04"

.25"

.348"

.25"

1.0 4"

2.1 9"

2.03"

0.68"

.99 7"

.175"

.68"

REV

IDL_F7C063_SWITCH V2_WEMO_US_PACKAGE

Artwork File:

QIG_F7C063_8820-02451_RevA00_Mini

DIE LAYOUT

Business Unit:

Conserve

Program Manager:

BOM- F7C063

SLEEVE

INSERT - Corrugated

OUTER BOX

QIG

QIG SLEEVE

Refer Artwork

SLEEVE - 400 gsm C2S

NITTO TAPE

Packaging Engineer:

Pushpak Jain

Retail Outside Dimension (Including Hang Tab)

FCC

PET Hanger

Wafer Seal (4 Nos)

HANGER FOLDED INSIDE THE CASE PACK

Refer Artwork

7100-00267 Rev.A00

20 mm

Insert - 29ECT/175lb E Flute SBS

SCREEN GLUE

L x W x D (in):

0 x 0 x 0

L x W x D (mm):

0.00 x 0.00 x 0.00

PACKAGE COMPONENTS WILL FTP SEPERATELY PACKAGE COMPONENTS WILL FTP SEPERATELY

[73.023]

DIE/MATERIAL SPECS:

Material:

Please refer to drawing

NON PRINTED SIDE

[152.399]

[462.752]

TRAY COMPONENTS WILL FTP SEPERATELY TRAY COMPONENTS WILL FTP SEPERATELY

NON PRINTED SIDE

[502.469]

Blank Size (in):

75.134 x 74.144

Blank Size (mm):

1908.411 x 1883.265

[96.552]

[46.404]

This dieline works for following skus (if any):

OUTSIDE - PRINT SIDE

[113.506]

[228.600]

OUTSIDE - PRINT SIDE

[136.216]

[227.443]

OUTER BOX - 29ECT/175lb E Flute SBS

PET 0.5 mm

[34.288]

Unit:

Side Shown:

IN/MM

PRINT SIDE

BROWN BOX COMPONENTS WILL FTP SEPERATELY BROWN BOX COMPONENTS WILL FTP SEPERATELY

[147.510]

[432.971]

[79.750]

7100-00267 Rev.A00

Flute/Grain:

vertical

Tolerance:+/- 1/32" - 0.8mm

OUTSIDE - KRAFT

CORRUGATION DIRECTION

Drawing Scale 1:1

RELEASE DATE:

07/25/2016

[111.418]

[738.079]

[69.109]

DIELINE:

Intermediate

FCC - 80 gsm WOOD FREE PAPER

QIG SLEEVE - SBS 250 gsm C1S

FCC INSERT COMPONENTS WILL FTP SEPERATELY

[118.755]

QIG SLEEVE COMPONENTS WILL FTP SEPERATELY

NON PRINTED SIDE

[136.526]

FRONT

[93.650]

[187.297]

BACK

OUTSIDE - PRINTED SIDE

[268.594]

WEMO MARKETING

FILE

QIG_F7C063_8820-02451_RevA00_Mini

NAME

SKU#

DESIGNER

MARKETING :

PRODUCT MGNT:

SUSTAINABILITY :

LET’S GO.

Jonathan

APPROVED APPROVED W/ CHANGES RESUBMIT SIGN/DATE

RC :

Quick Start Guide

APPROVED APPROVED W/ CHANGES RESUBMIT SIGN/DATE

MINI

F7C063

DATE

PR# XXXXX

8820-02451

08/22/16 5:20 PM

REV

VERSION

GET THE APP.

Download (but don’t launch)

the latest Wemo app.

Wem o

GET

A00

QIG - 157 gsm COATED PAPER

I can’t ﬁnd the Wemo

My Wemo appears as

I’m still having trouble!

What do all these

Wi-Fi networks come in a lot of shapes and sizes with many quirks of their own. It doesn’t mean your Mini is malfunctioning. If problems persist, please try these steps, in this order:

1. Force quit and re-launch the Wemo app.

Check to see if this xes the issue.

2. Unplug your Mini and plug it back in.

Check to see if this xes the issue. 

3. Unplug your router and plug it back in.

Check to see if this xes the issue. 

4. Delete and reinstall the Wemo app.

Check to see if this xes the issue. 

5. If all else fails, restore your Mini to factory defaults: First, unplug your Mini. Press and hold power button while you plug it back in. Keep holding until LED starts blinking white, then release. Wait for your Mini to reboot (about 20 seconds). When the LED starts alternating white and amber, repeat steps 3–6 of the setup process.

blinking lights mean?

The Wi-Fi indicator light is o when your Mini is connected and working normally.

The Wi-Fi indicator light alternates white and amber when it’s ready for setup.

Solid white for 30 seconds means setup was successful and your Mini is on.

Blinking white means the rmware is updating.

Solid amber tells you the Wi-Fi signal is weak. Try moving your Mini closer to the router.

Blinking amber means your Mini is not connected to the Wi-Fi network. Try unplugging your router and/or Mini and plugging them back in.

Need more help? Visit wemo.com/support.html

[119.062]

THE HARD PART

Plug your Mini into any outlet. Wait until the

Wi-Fi® indicator light ashes white and amber.

FIND YOUR SETTINGS

Open up your phone’s settings

and select Wi-Fi.

Wi-Fi Settings

Wemo.Mini

Other network

You get the idea

GET CONNECTED

In your smartphone’s Wi-Fi settings,

connect to “Wemo.Mini.”

PERSONALIZE

Proceed

ALMOST DONE

Launch the Wemo app to

complete setup. (Whew!)

PERSONALIZE

Press “Proceed” to complete

the setup process.

TROUBLESHOOTING

MINI

network in my Wi-Fi list.

Make sure your Mini is plugged in and the LED is alternating white and amber. If the LED is not alternating white and amber, unplug your Mini and plug it back in to reboot.

My Wi-Fi network doesn’t appear in the Wemo app.

Use your smartphone to conrm that you

have at least two Wi-Fi bars in the vicinity of your Mini. If not, move your Mini closer to your router. (The list will refresh every 10 seconds.)

“Unavailable” in the app.

Refresh the device list.

My Wemo app is frozen.

Force quit and re-launch the Wemo app.

I just replaced my router.

To reset the W-Fi without losing your Mini settings, hold down the power button and wait for the LED to change from amber to blinking white, then release. When the LED begins to alternate white and amber, follow steps 3–5 to associate your Mini with your new network.

FRONT

[93.662]

BACK

[655.635]

8820-02451 Rev. A00

THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION.

PRINT SPECS:

Color Plates:

Finish:

IT MUST BE RETURNED UPON REQUEST

Notes:

DO NOT PRINT

PMS

ALL TEXT AND GRAPHIC ELEMENTS COLOR: CMYK, PMS 801C

801C

DIE LINES, PRINTERS NOTES

0.00 x 0.00 x 0.00

Business Unit:

Program Manager:

Packaging Engineer:

Material:

Blank Size (in):

Side Shown:

L x W x D (mm):

Unit:

Flute/Grain:

REV

Intermediate

PRINT SIDE

0 x 0 x 0

L x W x D (in):

7100-00267 Rev.A00

NITTO TAPE

SCREEN GLUE

[118.755]

[136.526]

QIG SLEEVE - SBS 250 gsm C1S

NON PRINTED SIDE

CORRUGATION DIRECTION

NON PRINTED SIDE

OUTER BOX - 29ECT/175lb E Flute SBS

SLEEVE - 400 gsm C2S

[462.752]

[113.506]

[228.600]

[152.399]

[73.023]

[227.443]

[136.216]

[502.469]

[96.552]

[46.404]

Insert - 29ECT/175lb E Flute SBS

OUTSIDE - PRINT SIDE

NON PRINTED SIDE

[34.288]

[79.750]

PET 0.5 mm

FCC - 80 gsm WOOD FREE PAPER

[111.418]

[147.510]

[69.109]

[738.079]

[432.971]

IN/MM

Drawing Scale 1:1

Retail Outside Dimension (Including Hang Tab)

DIE/MATERIAL SPECS:

1908.411 x 1883.265

75.134 x 74.144

Die Line File:

Conserve

Pushpak Jain

Please refer to drawing

IDL_F7C063_SWITCH V2_WEMO_US_PACKAGE

Artwork File:

vertical

RELEASE DATE:

07/25/2016

Tolerance:+/- 1/32" - 0.8mm

Blank Size (mm):

DIELINE:

This dieline works for following skus (if any):

Die Line File:

.25"

RSS-247

REV

IDL_F7C063_SWITCH V2_WEMO_US_PACKAGE

Artwork File:

INS_F7C063_8850-00370_RevA00_Mini_FCC

DIE LAYOUT

Business Unit:

Conserve

Program Manager:

BOM- F7C063

SLEEVE

INSERT - Corrugated

OUTER BOX

QIG

QIG SLEEVE

Refer Artwork

SLEEVE - 400 gsm C2S

NITTO TAPE

Packaging Engineer:

Pushpak Jain

Retail Outside Dimension (Including Hang Tab)

FCC

PET Hanger

Wafer Seal (4 Nos)

HANGER FOLDED INSIDE THE CASE PACK

Refer Artwork

Insert - 29ECT/175lb E Flute SBS

SCREEN GLUE

L x W x D (in):

7100-00267 Rev.A00

0 x 0 x 0

20 mm

L x W x D (mm):

0.00 x 0.00 x 0.00

PACKAGE COMPONENTS WILL FTP SEPERATELY

[73.023]

DIE/MATERIAL SPECS:

Material:

Please refer to drawing

NON PRINTED SIDE

[152.399]

[462.752]

TRAY COMPONENTS WILL FTP SEPERATELY

NON PRINTED SIDE

[502.469]

Blank Size (in):

75.134 x 74.144

Blank Size (mm):

1908.411 x 1883.265

[96.552]

[46.404]

This dieline works for following skus (if any):

OUTSIDE - PRINT SIDE

[113.506]

[228.600]

OUTSIDE - PRINT SIDE

[136.216]

[227.443]

OUTER BOX - 29ECT/175lb E Flute SBS

Unit:

IN/MM

BROWN BOX COMPONENTS WILL FTP SEPERATELY

[147.510]

PET 0.5 mm

[34.288]

[432.971]

[79.750]

Side Shown:

Flute/Grain:

PRINT SIDE

vertical

7100-00267 Rev.A00

Tolerance:+/- 1/32" - 0.8mm

Drawing Scale 1:1

OUTSIDE - KRAFT

CORRUGATION DIRECTION

RELEASE DATE:

07/25/2016

DIELINE:

[111.418]

[738.079]

[69.109]

Intermediate

WEMO MARKETING

FILE

INS_F7C063_8850-00370_RevA00_Mini_FCC

NAME

SKU#

DESIGNER

MARKETING :

PRODUCT MGNT:

SUSTAINABILITY :

F7C063

Jonathan

APPROVED APPROVED W/ CHANGES RESUBMIT SIGN/DATE

RC :

APPROVED APPROVED W/ CHANGES RESUBMIT SIGN/DATE

PR# XXXXX

DATE

• Protective earthing: Ground pin must not be removed from device.

• Positioning for disconnection: The socket outlet shall be installed near the equipment

and shall be easily accessible. To disconnect, pull device from outlet.

• To avoid any risk or hazard that may be caused due to the end product connected to

the Mini, please read and understand the operation of the connected equipment before operating with the Mini.

• If any of the above instructions are not followed, or the equipment is used in a manner not specied by the manufacturer, the protection provided by the equipment may be

impaired.

Device can be toggled on/o by touching the white button on top of the unit, or by using

the WEMO® App. The reset button on top of the unit can be used to reset the device to factory defaults.

For support, please visit: http://www.wemo.com/support.html

8850-00370

08/22/16 5:31 PM

REV

VERSION

A00

8850-00370 Rev. A00

FCC - 80 gsm WOOD FREE PAPER

in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the

user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modications not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement

The following paragraphs are required by the FCC and prove that this product meets all regulatory limits with regard to radio interference and radiation exposure. If you use this product as intended you will have no issues with either.

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY

We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the product, F7C063, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE:

IC Statement:

This digital apparatus complies with CAN ICES-3(B).

Industry Canada Statement:

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Waste Electrical and Electronic Equipment Directive

System Requirements: Wi-Fi router Android 4.1 and later; iOS v8.0 or higher

General Specications: Electrical Rating: 120V~/ 15A / 60Hz / 1800W Number of Power Outlets: 1

Wi-Fi: 2.4GHz 802.11n

Operating Conditions: For indoor use only Altitude: 6561.7 ft. (2000m) Operating Temperature: 0–40° C Pollution Degree: PD2 Over-Voltage Category: OVC II Mains Supply Tolerances (%): ± 10% Direct plug-in electronic switch. Purpose of Control: Electrically operated automatic control Degree of Protection: IP20 Type of Action: Type 1B Rated Impulse Voltage: 1500V Overcurrent Protective Device External to the Control: 15A or 20A

Care: Unplug device prior to cleaning. Use dry cloth on exterior of the device. To avoid

shock hazard and/or damage to device, DO NOT use any liquid solution.

Caution:

• Make sure device is o before plugging in any electronics.

• Changes or modications not expressly approved by party responsible for compliance

could void the user’s authority to operate the equipment.

[118.755]

QIG SLEEVE - SBS 250 gsm C1S

QIG SLEEVE COMPONENTS WILL FTP SEPERATELY

NON PRINTED SIDE

[136.526]

FRONT

[93.650]

[187.297]

BACK

OUTSIDE - PRINTED SIDE

[268.594]

QIG - 157 gsm COATED PAPER

QIG COMPONENTS WILL FTP SEPERATELY QIG COMPONENTS WILL FTP SEPERATELY

FRONT

[93.662]

[119.062]

BACK

[655.635]

THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN

PRINT SPECS:

CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST

Color Plates:

Finish:

Notes:

DO NOT PRINT

ALL TEXT AND GRAPHIC ELEMENTS COLOR: BLACK

DIE LINES, PRINTERS NOTES