5. Information ......................................................................
3
3
4
6
7
9
Introduction
Congratulations and thank you for purchasing the FireWire
800 ExpressCard Adapter from Belkin. This ExpressCard
Adapter offers notebook users a fast and convenient way
to add a FireWire® port that can take advantage of the
increased bandwidth and features the new ExpressCard I/O
interconnection standard delivers.
Why ExpressCard Technology?
ExpressCard technology, the standard destined to replace
CardBus, quadruples your computing bandwidth. This
results in faster music downloads, smoother streaming
video, and lightning-fast access to mass-storage devices.
The ExpressCard Adapter provides the perfect solution for
simultaneously streaming movies and downloading video
from your camcorder to your hard drive—without risking
that your computer will freeze, crash, or slow to a trickle.
ExpressCard technology future-proofs your computer with
technology so advanced that it exceeds the processing
speed of many devices currently on the market. This means
that installing the ExpressCard Adapter now assures you of
device-upgrade expansion room for many years to come.
Please carefully review this User Manual so that you can
take full advantage of all the capabilities the Belkin FireWire
800 ExpressCard Adapter offers.
1
1
2
2
3
3
4
4
5
1
Introduction
Benefits
1
• Meets PCI Express Base Specification Revision 1.1
• Delivers single-lane (x1) PCI Express throughput support
2
3
4
5
rates of 2.5Gbps
• Complies with ExpressCard 34mm-wide
module specification
• Builds in 2 external, independent 6-pin FireWire 800 ports
• Supports 1394 Open Host Controller Interface (OHCI)
Specification 1.1
• Features IEEE 1394b-compliant ports at 100, 200, 400, and
800Mbps
• Equips 1 DC jack for using power adapter to provide
12VDC power output
• Complies with IEEE 1394, 1394a, and 1394b
• Allows you to connect/disconnect devices without
powering down the system (hot-swappable)
2
3
Introduction
System Requirements
• Windows®-based or Mac® notebook with available
ExpressCard slot
• Windows 2000 and XP
• Mac OS® X v10.4.x and above
Package Contents
• FireWire 800 ExpressCard Adapter
• CD Driver
• User Manual
1
2
3
4
5
3
Driver Installation
1. Insert the FireWire 800 ExpressCard Adapter installation
1
2
3
4
5
CD into your CD-ROM drive. After a few moments, the
main menu automatically starts. Note: If the main CD does
not begin automatically, click the “Start” button and select
“Run”. From the “Run” dialog box, enter “<drive>:\setup_
xp2.exe” and click “OK” (where “<drive>” represents the
driver letter that identifies your CD-ROM drive under “My
Computer”—e.g., if the CD is in drive D, enter “D:\setup_
xp2.exe”).
2. Locate your notebook’s ExpressCard slot(s). With your
notebook on, slide the ExpressCard Adapter into the
unused 34mm or 54mm ExpressCard slot.
Note: Do not plug any devices into the ExpressCard
Adapter until you have completely finished the
driver installation.
3. Select “FireWire 800 Driver”. The Software Installation
Wizard appears and begins to download the drivers. If
the following “Software Installation” prompt appears, click
“Continue Anyway” to complete the installation process.
4
5
Driver Installation
1
2
3
4
4. After the files successfully copy over, verify that the
correct driver has been installed on your computer, as
described below under “Verifying Proper Installation”.
5. Installation is now complete and the ExpressCard Adapter
is ready to use.
5
5
Verifying Proper Installation
Check the “Windows Device Manager” to confirm that your
1
ExpressCard Adapter has been
properly installed.
2
1. Right-click on “My Computer” and
select “Manage”.
3
2. Select the “Device Manager” tab.
3. Click the (+) sign next to “IEEE 1394 Bus host controllers”.
4
The “IEEE 1394 Bus host controllers” will now include one
entry that reads “OHCI IEEE 1394b Host Controller”.
5
66
Troubleshooting
The ExpressCard Adapter and devices connected to the
computer do not work properly.
Please do the following:
1. Check that all the cables you are using are the correct
types, and that they are all securely connected.
2. Make sure all devices are powered on and connected to
the proper power supply and source.
3. Reconnect daisy-chained devices you may have
disconnected for installation. If reconnecting does not
clear up the problem, restart your computer.
4. Make sure you have properly installed
the ExpressCard Adapter.
The computer did not detect the
ExpressCard Adapter.
1. Make sure that the ExpressCard Adapter is correctly
plugged into the ExpressCard 34/54mm slot; if not, plug
in it securely.
2. If the ExpressCard Adapter is plugged in correctly, see if
its gold connectors are clean; if not, clean the connector
surface.
3. Follow the procedure on page 6 titled “Verifying Proper
Installation”. If the ExpressCard designation “OHCI IEEE
1394b Host Controller” does not appear in the Device
Manager, update your computer BIOS to the latest
version (contact your computer manufacturer for details).
If after updating your BIOS your computer still does not
detect the ExpressCard Adapter, contact your computer
manufacturer for advanced support for BIOS.
1
2
3
4
5
7
7
Troubleshooting
I cannot install the ExpressCard Adapter driver.
1
Ensure that your Microsoft
is upgraded to the latest “Service Pack” (please check
2
the Microsoft website). It is highly recommended that you
update your system to Windows 2000 service pack 4,
Windows XP
3
service pack 2, or Windows Server 2003 service
pack 1 (or later).
®
Windows operating system
4
5
88
Information
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220,
declare under our sole responsibility that the product,
to which this declaration relates,
Complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
CE Declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility that the F5U514,
to which this declaration relates, is in conformity with Generic Emissions Standard
EN55022:1998 Class B, EN50081-1, and with Generic Immunity Standard
EN50082-1 1992.
Belkin International, Inc., Limited Lifetime Product Warranty
What this warranty covers.
Belkin International, Inc., warrants to the original purchaser of this Belkin
product that the product shall be free of defects in design, assembly, material, or
workmanship.
What the period of coverage is.
Belkin International, Inc., warrants the Belkin product for the lifetime of the
product.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product free of charge
(except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided
to Belkin International, Inc., for inspection upon Belkin’s request at the sole
expense of the purchaser, or if Belkin International, Inc., determines that the
Belkin product has been improperly installed, altered in any way, or tampered
with. The Belkin Product Warranty does not protect against acts of God (other
than lightning) such as flood, earthquake, war, vandalism, theft, normal-use wear
ELECTROMAGNETIC COMPATIBILITY
F5U514
1
2
3
4
5
99
Loading...
+ 26 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.