Belkin F5U111 User Manual

DECLARATION OF CONFORMITY WITH FCC RULES FOR

ELECTROMAGNETIC COMPATIBILITY

We, Belkin Components, of 501 West Walnut Street, Compton
CA 90220, declare under our sole responsibility that the product:

Belkin Components F5U111

to which this declaration relates:
Complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

CE Declaration of Conformity

We, Belkin Components, declare under our sole responsibility
that the

Belkin Components F5U111

to which this declaration relates, is in conformity with General
Emissions Standard EN50081-1 and with Generic Immunity
Standard EN50082-1 1992.

Belkin Components

501 West Walnut
Compton • CA • 90220-5221
Phone 800.2BELKIN (223.5546)

310.898.1100

Fax [phone]

Belkin Components, Ltd.

13 Gatelodge Close
Round Spinney • Northampton • NN3 8RX

Phone [phone]
Fax [phone]

© 1999 Belkin Components. All Rights Reserved. All Trade Names Are Registered Trademarks Of Respective Manufacturers Listed.

www.belkin.com

usb.belkin.com

USB Ethernet Adapter

User Manual

F5U111
P73311

WARRANTYAND LICENSE

Belkin Components warrants this product to be free from defects in
material, content, and workmanship for life. If a defect is discovered,
Belkin will, at its option, repair or replace the product at no charge.
Proof of purchase may be required.
The CATC software is licensed for use on a single PC. The software
may be copied for backup purposes only.
This warranty covers all defects in material or workmanship. It does not
cover accidents, misuse, neglect, unauthorized product modification, or
acts of nature. Belkin Components shall not be liable for damage to
other property caused by any defects in this product, damages based
upon inconvenience, loss of use of the product, loss of time or data,
commercial loss, or any other damages, whether incidental,
consequential, or otherwise.
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. If this equipment does cause
harmful interference to radio or television reception, the user will be
responsible to correct the interference at his own expense.
Note 1: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note 2: Shielded interface cables must be used in order to comply with
the emissions limits.

Contacting Belkin Components:
Sales 310.898.1100
Technical Support 310.898.1100 ext.2263
Web Site www.belkin.com
E-mail

[e-mail]
[e-mail]

Version 1.3a September 30, 1998 Copyright 1998. All rights reserved. No part of this manual may be
copied, photocopied, reproduced, translated, or reduced to electronic medium or machine-readable
form without prior written consent from Belkin Components.

12

Warranty and License

1

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

2. USB Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2.1. Ethernet Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2.2. Supplied Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

2.3. System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

2.4. Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

3. Installation (SETUP.EXE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

3.1 Automatic Installation for Win

®

98 . . . . . . . . . . . . . . . . . . . . .7

4. Specifying the TCP/IP Parameters . . . . . . . . . . . . . . . . . . . . . . .8

5. To Unintall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

6. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

7. Warranty and License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Table of Contents

Thank you for purchasing the Belkin Components USB Ethernet
Adapter. Now, you can easily connect any USB-equipped notebook,
portable, or desktop computer to an Ethernet local area network.
Windows

®

applications that communicate via an Ethernet card will also
work with the Belkin USB Ethernet Adapter. It offers a Plug-and-Play
solution for network connectivity, eliminating the need to insert cards or
shut down the system at connection time.
Our adapter conforms to both USB and Ethernet specifications, and
functions as a full-speed USB device. The unit requires no external
power supply; it is powered directly by the Universal Serial Bus.
The provided software supports the Windows

®

98 operating system
environments. This manual explains how to connect and use the Belkin
USB Ethernet Adapter hardware and software with your PC and
network environment.

1. Introduction

2