Belkin F5L113 User Manual

QUICK INSTALL GUIDE

Thank you for purchasi ng the Belkin YourType Keyboard + Stand,

a Bluetooth

keyboard accessor y to be used with your iPa d.

YourType™ Keyboard + Stand

Product Overview

Yo u rTyp e Keyboard + Stand

1. Cover/stand

2. Retractable feet

3. Battery cavity

4. Bluetooth pair button

5. Bluetooth

6. On/O switch

7. Status LED

keyboard

Package Contents

1. Keyboard + Stand

2. Two AAA Batteries

3. Quick Install Guide

Contents may vary in dierent areas.

QUICK INSTALL GUIDE

321

QUICK INSTALL GUIDE

Thank you for purchasing the Belkin YourType Keyboard + Stand, a Bluetooth® keyboard accessory to be used with your iPad.

YourType™ Keyboard + Stand

Yo u rTyp e Keyboard + Stand

Setup

1. Install batteries underneath stand.

2. Open smart cover to reveal keyboard.

3. The cover doubles as a tablet stand in which to place your iPad.

1 2 3

QUICK INSTALL GUIDE

Shortcut/Quick Keys

The keyboard incorporates additional shortcut keys mapping to popular iPad functions or productivity shortcuts as defined below:

Function Icon Function Icon Function Icon

Screen Off

Home

Virtual Keyboard

Select A ll

Select L eft

Select Right

Copy

Cut

Paste

Previous Track

Play/ Pause

Ne xt Tr ack

Mute

Volu me Down

Volu me Up

Slideshow

Yo u rTyp e Keyboard + Stand

Powering the Keyboard

The keyboard base contains a battery cavity that holds two AAA batteries. When you turn your keyboard ON, the Status LED will flash blue. When the keyboard batteries are low, the Status LED will flash amber.

Pairing the Keyboard

The keyboard connects to your tablet via Bluetooth technology.

Before using the keyboard, you must first pair it with your iPad. Pairing is necessary for two Bluetooth devices to connect to each other wirelessly. After creating a paired link, you do not need to repeat the pairing process; the keyboard will automatically link to the tablet when both devices are switched on. Pairing must be performed every time you want to use the keyboard with a different device. If the keyboard is not paired, the status LED will flash blue.

QUICK INSTALL GUIDE

To initiate pairing bet ween the keyboard and iPad, ensure that they are in close proximity. Then on the iPad:

1. Go to the Home screen on your iPad and tap on “ Settings > General > Bluetooth.”

2. Turn Bluetooth to “On” by tapping on it.

3. Turn the keyboard on and press and hold the “pair” key.

4. The Status LED will flash blue on the keyboard and the keyboard will show up under “Devices” on the tablet. Select “Belkin Bluetooth Keyboard.”

5. A code will appear on the iPad screen. Enter this code followed by the “Enter” key using the keyboard.

6. When pairing is complete, the iPad will notify you that the pairing was successful. The keyboard will then be paired to your iPad.

7. If, after 60 seconds, pairing fails, you will have to repeat the steps above. You can view the status from the screen of the iPad.

8. You can now use the keyboard to type onto your iPad.

Yo u rTyp e Keyboard + Stand

Using the Keyboard

The YourType Keyboard + Stand is designed to prolong battery life and will enter into battery-saving mode under prolonged inactivity. To wake the keyboard, press any button. The Status LED will flash blue while the connection is being reestablished, and will be solid blue for two seconds when the connection is successfully established. The Status LED then turns off during ongoing operation.

Bluetooth Wireless Technology

Bluetooth wireless technology has revolutionized the personal connectivity market by providing seamless freedom from wired connections. It offers a small form factor and a low-cost radio solution, providing links between mobile computers, mobile phones, and other portable and handheld devices as well as connectivity to the Internet. The Bluetooth Special Interest Group (SIG), composed of leaders in the telecommunications, computing, and network industries, is driving development of the technology and bringing it to market. The Bluetooth SIG includes promoter companies 3Com

, and more than 2,000 adopter companies.

Toshiba

, Ericsson®, IBM®, Intel®, Lucent®, Microsoft®, Motorola®, Nokia®,

QUICK INSTALL GUIDE

Safety Precautions

Please read the following carefully before using the product. Incorrect use or incompatibility with your device may result in reduced performance or damage to your device.

• Do not attempt to disassemble product.

• Store and operate between 32° F–113° F.

• Do not allow this product to have contact with liquids.

• Do not place this product near a heat source or flame or it may explode.

• Do not throw or shake the YourType Keyboard + Stand.

• Do not crush or puncture the YourType Keyboard + Stand.

• Use soft cloth to clean the exterior. Do not use harsh chemicals or strong cleaning solvents.

Recycling/Discarding

The YourType Keyboard + Stand should be disposed of properly. Please do not dispose in trash receptacles or incinerate.

Yo u rTyp e Keyboard + Stand

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT NOTICE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

QUICK INSTALL GUIDE

RSS-Gen & RSS-210 Statement

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

RSS-102 Statement

This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.

IMPORTANT NOTE:

Canada Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment

should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Yo u rTyp e Keyboard + Stand

Belkin International, Inc., Limited 1-Year Product Warranty

What this warranty covers.

Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship.

What the period of coverage is.

Belkin warrants the Belkin product for one year.

What will we do to correct problems?

Product Warranty.

Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products. In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund

or a credit toward the purchase of another product from Belkin.com in an amount equal to the purchase price

of the product as evidenced on the original purchase receipt as discounted by its natural use.

What is not covered by this warranty?

All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon

Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been

improperly installed, altered in any way, or tampered with. The Belkin Product Warranty does not protect

against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear,

erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags),

non-authorized program, or system equipment modification or alteration.

QUICK INSTALL GUIDE

How to get service.

To get service for your Belkin product you must take the following steps:

1. Contact Belkin International, Inc., at 12045 E. Waterfront Drive, Playa Vista, CA 90094,

Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepared to provide the following information:

a. The part number of the Belkin product.

b. Where you purchased the product.

c. When you purchased the product.

d. Copy of original receipt.

2. Your Belkin Customer Service Representative will then instruct you on how to for ward your receipt and Belkin product and how to proceed with your claim.

Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is

impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin

reserves the right to be subrogated under any existing insurance policies the purchaser may have.

+ 29 hidden pages