Belkin F4U008 User Manual

USB 2.0 NOTEBOOK CARD

F4U008User Manual

Features

• Fully supports EHCI and OHCI Compliant standards

• Compliant with Universal Serial Bus specification revision 2.0

• Provides two ex ternal Type A USB 2.0 (480Mbps) por ts into your system

• Supports simultaneous operation of multiple USB 2.0 and USB 1.1 devices

• Supports data transfer rates of high-speed (480Mbps), full-speed (12Mbps), and
low-speed (1.5Mbps)

• Works with various types of USB devices including hubs, removable drives, digital
cameras, scanners, CD-RWs, PC video cameras, printers, and more.

Package Contents

• 1 x USB 2.0 NOTEBOOK CARD

• 1 x User Manual

System Requirements

• Windows® 200 0 SP4 / XP SP1 or later / Server 2003 / Vista

• Available C ardBus Type II Slot

Hardware Description

CAUTION:
Use only switching power adapter* with following specifications:

Switching power adapter (Optional) DC 5 V, 1A
Polarit y: Outside negative voltage(-) & Inside positive voltage(+)

3.5mm power jack

* Power supply i s not in cluded.

EN-1

EN-3

Hardware Installation

General instructions for installing the card are provided below. Since the
design of system may vary, refer to your system’s reference manual for
further information, if needed.

1. Power off your notebook computer.

2. Insert the USB 2.0 NOT EBOOK CA RD into the Type II PC Card slot of your
notebook computer. Make sure it is inserted all the way in for a solid
connection.

3. Power on your notebook computer.

Driver Installation

For Windows® 2000/XP/Ser ver 20 03/ Vista
Windows® 200 0, XP, Server 2003 and Vista will automatically detect and
install the correct driver for the USB 2.0 NOTEBOOK CAR D.
However, please ensure you have the latest Ser vice Pack Installed.

EN-2