Belkin F4D116 User Manual

INSTRUCTIONS

1. Lay side rails (1) on the floor.

2. Assemble base angle (2), and top
angle (3) as shown in Figure 1.

3. Turn rack over and repeat base and
top angles on other side.

4. Square legs. Tighten all bolts.

5. Mount to floor, using suitable
fasteners (see note below).

6. Install equipment using provided
screws.
NOTE:

-Due to variances in floors, shims may
be needed under base angles.

-To square legs, measure diagonally

INSTRUCTION SHEET- F4D116

ALUMINUM EQUIPMENT RACK 19" X 48"

between top and bottom bolts. The
distance between A and B should be the
same as C and D (see Figure 2).

BELKIN

TOOLS NEEDED:

9/16" wrench or socket
Measuring tape
#2 Phillips screwdriver

FIGURE!

Parts List

ITEM QTY DESCRIPTION

1 2 Rack Leg
2 2 Rack Base
3
4 12
5 12 Hex Cap Screw 3/8-16 x 1
6 30 Pan Head Phillips 12-24 x 0.625

2

Top Angle

Flat Washer 3/8"