Belkin F1P1241EGAU, F1P1210ENAU, F1P1241ENAU User Manual

IMPORTANT!

Self Help Guide

Restore your Belkin VoIP unit to the factory default settings

This process may take up to 1-2 minutes

Before you begin

You will need:

• Belkin VoIP unit

• Power cable

• Network cable

Hardware check:

• Your computer is switched on

• The VoIP unit is switched on (power switch at rear)

• Network cable connected from computer to the VoIP unit

F1P1241EGau

Step 1 Open your web browser (Internet Explorer, Mozilla FireFox, Safari etc)

Step 2 In the Address Bar, delete any text and type in 10.1.1.1 or Click Here to open the page directly

Step 3 Type in your current password (default password = admin)

then click

Step 4 On the left hand side of the screen click Advanced Setup

Step 5 You will now be presented with more options in the menu on the left. Click Tools then choose Conﬁguration Tools

F1P1241ENau

F1P1210ENau

TSG xxx004a-rev1 Page 1 of 1

Step 6 Left click on Restore router to Factory Defaults and click Next

Step 7 Click Apply, the VoIP unit will now restore to factory defaults

and reboot.

If you still require further assistance Call: 1300 554 780 contact Belkin Technical Support Visit: www.belkin.com/support