Belkin F1DS104P User Manual

Self Help Guide

IMPORTANT!

This Guide refers to the following Products:

F1DS104P

SOHO KVM Firmware Update Instructions

Please read the following carefully;

Synopsis:

This guide will assist you in updating the firmware of your Belkin OmniView SOHO KVM Switch.

Please be advised that firmware updates tend to be to resolve specific issues and if there is any doubt if the firmware will resolve your issue you should check with Technical Support.

F1DS104T

Requirements:

To perform the Firmware Upgrade successfully you will need the following equipment;

• SOHO KVM

• 9 V DC 600mA KVM Power Supply (optional)

• RJ45-DB25 Flash Update Cable (supplied)

• PC with Win 98, ME,2000 or XP and Parallel Port

• Firmware Update File

• NTPDA Update

• 1 KVM Cable Kit (to connect to PC)

You will also need to ensure that any Firewall or Anti-Virus Software is disabled on the Computer from which you will be upgrading the Firmware.

TSG-UK-1-001 | www.belkin.com | Page 1 of 1

TSG-UK-2-003 | www.belkin.com | Page 1 of 4

Self Help Guide

SOHO KVM Firmware Update Instructions

Step 1

Before proceeding with the Firmware Update you will need to ensure that the Computer being used for the update process is ready.

If you are running Windows 2000 or XP you will need to install an NT Direct Port Access

Update prior to running the Flash Update. The NTPDA.exe file Update Utility can be

downloaded from the same location as the Firmware Update files. Once downloaded, the file should be unzipped and the ‘Setup.exe’ file run in order to install.

You will be prompted to reboot your system to complete the process.

Step 2

The KVM will need to be powered in order to perform the Flash Update process. As the KVM did not come with a Power Supply Unit (9V DC 600mA) it will need to be connected to at least one computer in order to receive power.

Should you have a suitable power supply then thi s should be plugged in instead of a Computer.

Step 3

The KVM Unit itself now needs to have the Flash Dip Switches set according to th e type of Firmware File that it is set to receive.

MAIN | KEYBOARD

For firmware specifically designed to resolve Keyboard related Issues, or for general Firmware Updates.

MOUSE |

For firmware specifically designed to resolve Mouse related Issues.

TSG-UK-1-001 | www.belkin.com | Page 1 of 1

TSG-UK-2-003 | www.belkin.com | Page 2 of 4

+ 2 hidden pages