Page 1
Secure DVI-I KVM Switch with Audio
User Manual
F1DN102B – Secure 2-Port DVI-I KVM with Audio
F1DN102C – Secure 2-Port DVI-I KVM with Audio Plus
F1DN104B – Secure 4-Port DVI-I KVM with Audio
F1DN104C – Secure 4-Port DVI-I KVM with Audio Plus
8820- 00762 Rev. A00
Page 2
TABLE OF CONTENTS
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 8SECTIONS 1 2 3 4 5 6 7 8Table of Con tent s
Introduction ............................................. 1
Package Contents ..................................... 1
Overview................................................ 2
Security Features ...................................... 2
Other Features ........................................ 4
Equipment Requirements ............................... 5
System Requirements .................................. 6
Unit Display Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications......................................... 9
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Pre-Configuration .................................... 11
Connection and Installation ............................. 11
Color Code Chip Installation ............................ 13
Secur e DVI-I KVM S witch with Au dio
Oper ating the KVM Switch ............................... 14
Common Acc ess Card (CAC) Co nfigura tion and Installation . . 15
Frequ ently Asked Questions ............................. 16
Trouble shooting ........................................ 17
Information............................................. 19
i
Page 3
INTRODUCTION
9
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 8SECTIONSTable of Con tent s 1 2 3 4 5 6 7 8
Thank you for purchasing this Belkin Secure DVI-I KVM Switch (the
Switch). This K VM Switch is designed for use in secure defense and
intelligence installations. The Switch offers safe centralize d control,
which prevents unintended data transfer between computers running
at different security levels. The Switch provides the highest security
safeguards and features that meet today’s IA (Information Assurance)
computing requirements.
This User Manual provides all the details you’ll need to install and
operate your new Switch, in addition to expert troubleshooting
advice—in the unlikely event of a problem.
Secur e DVI-I KVM S witch with Au dio
Package Contents
• Belkin Secure DVI-I KVM Switch
• 12V 1.5A DC Power Supply and Power Cord
• 10 Interchangeable Port Color Chips (multiple colors)
• 12 Port-Naming Labels
• 6 Ft. USB Cable (F1DN102C, F1DN104C models only)
• User Manual
Important: This Switch is equipped with active anti-tamper
triggers. Any attempt to open the enclosure will activate the
anti-tamper triggers and render the unit inoperable. If t he
unit’s enclosure appears disrupted or if all the port LEDs flash
continuously, please call Belkin Technical S uppor t at
(800) 282-2355.
1
Page 4
OVERVIEW
Security Features
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 82
The Belkin Secure DVI-I KVM Switch is the most advanced and
secure commercially available KVM Switch available today. Below is a
summar y of all the security features incorporated into the Switch.
Dedicated Process ors
The Switch features a dedicated processor per computer por t. This
keeps each computer running on different security levels physically
separated and secure at all times, and prevents any unintended data
leakage between computers.
No Memory Buffer
The Switch does not have a memor y buffer and does not have the
ability to store data. This prevents any keystrokes or other data
input from being unintentionally transferred as you switch between
computers, ensuring the integrity of your data.
Non-Reprogra mmable Firmware
The Switch features custom firmware that is not reprogrammable,
preventing the abilit y to tamper with the KVM logic.
Unidirectio nal Data Path s
Optical diodes used in USB data paths provide high isolation and
prevent data leakage.
Secur e DVI-I KVM S witch with Au dio
Solid-Alumin um, Uni-Body Enclosure
The one-piece aluminum enclosure reduces the entry points into
the Switch’s electronics and minimizes radiated signals that can be
snoope d or intercepted.
Active Anti-Tamper Triggers
Active chassis anti-tampe r triggers prevent KVM electronics from
being accessed and tampered with.
Tamper-Evident Tape
A holographic security tamper-evident label is placed on the
enclosure to provide a visual indication if the Switch has been opened
or compromised.
Tamper-Proof Hardwar e
All integrated circuits are soldered directly to the printed circuit board
to prevent tampering with the components.
2
Page 5
OVERVIEW
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 82
Protected Display Information
Protected DDC/EDID emulation prevents software weaknesses that
can cause data leakage while maintaining compatibility with the
console display.
USB Device Detecti on
Storage and other unsafe USB devices are rejected when connected
to the Switch. Only mouse and keyboard data are passed through.
Secure Packaging
“Tear away” packaging ensures secure delivery of the Switch as it is
routed to the end user.
NIAP List ing
The Switch is listed by the National Information Assurance Par tnership
(NIAP). It is NIAP Common Criteria validated to EAL 2+ (Evaluation
Assurance Level 2).
Secur e DVI-I KVM S witch with Au dio
3
Page 6
OVERVIEW
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 82
Other Features
The Belkin Secure DVI-I KVM Switch was designed with the user in
mind for today’s IT environment. Below is a summary of some features
incorporated into the Switch.
USB Support
The Switch is compatible with USB technology and suppor ts plugand-play connectivity with USB computers, keyboards, and mice.
DVI-I Support
The Switch supports both digital and analog video signals. Analog
signals are passed through.
Dual-Link DVI Support
The Switch supports video resolutions of up to 2560x1600. This
includes support for digital displays 24 inches and larger.
Audio Switching
Allows you to share speakers between computers.
Secur e DVI-I KVM S witch with Au dio
Port Coloring
The included color chips can be inserted into each port-selector
button. Colors can be associated with an established network to
facilitate port identification and reduce user switching error.
Port Naming
The included network-name labels can be placed in the area
underneath the port-selector button to facilitate por t identification and
reduce user switching error.
LED Indicator s
Each port button number illuminates to indicate that the console
currently controls the corresponding computer. As a port selector is
pushed, the LED number will light up.
Integrated Mounting Rails
Integrated mounting system for easy under-desk or side-wall
mounting.
4
Page 7
OVERVIEW
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 82
Equipment Requirements
Cables
Belkin highly recommends you use Belkin DVI/USB K VM Cable Kits
for your Switch to help ensure superior per formance. These cables
offer the highest quality possible to ensure optimal data and video
transmission. One Cable Kit is required per connected computer.
Belkin DVI-D/USB KVM Cable Kits with audio:
F1D9012b06 – 6 f t. (1.8m)
F1D9012b10 – 10 ft. (3m)
F1D9012b15 – 15 ft. (4.6m)
Belkin DVI-A to HD15/USB K VM Cable Kits with audio (support
analog video only):
F1D9015b06 – 6 ft. (1.8m)
F1D9015b10 – 10 ft. (3m)
Secur e DVI-I KVM S witch with Au dio
Belkin CAC USB A/B Cable (F1DN102C, F1DN104C models only)
F1D9013b06 – 6 ft. (1.8m)
F1D9013b10 – 10 ft. (3m)
F1D9013b15 – 15 ft. (4.6m)
Note: Due to USB and DVI signal limitations, the cable length cannot
exceed 15 feet (4.6m).
5
Page 8
OVERVIEW
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 82
System Requirements
Oper ating-S ystem (OS) Pla tforms
The Switch is compatible with computer s running on, but not limited
to, the following OS platforms:
®
• Windows
• Windows XP (Home/Professional)
• Windows 2003 Ser ver
• Windows 7
• Windows Vista
• Red Hat® Linux®
• Other Linux distributions
• Mac OS
Secur e DVI-I KVM S witch with Au dio
2000
®
®
X v10.3 and higher
Keyboards
• USB-compatible (non-composite)
• (or) PS/2-compatible
Mice
• USB-compatible (non-composite)
• (or) PS/2-compatible
Monitors
• Digital displays with DVI-D support, single-link and dual-link
• Analog displays with VGA support
Common Acc ess Card (CAC) Re aders
(F1DN102C, F1DN104C models on ly)
• USB-compatible CAC or smart-card reader s
6
Page 9
OVERVIEW
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 82
Unit Display Diagram, Front View
Tamper-Evident Seal
Secur e DVI-I KVM S witch with Au dio
LED Indicator
CAC Enable S witch (F1DN102C,
F1DN104C models only)
Port Selector
Name Label Guide
7
Color Chip
IMPORTANT
NOTICE:
If for a ny rea son
the tamper-evident
seal i s missing,
appea rs disrupte d,
or loo ks dif feren t
than th e example
shown h ere, p lease
call Belkin Technical
Support at (80 0)
282-2355.
Page 10
OVERVIEW
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 82
Unit Display Diagram, Back View
Console U SB
Mouse Port
Video Diagnostic LED
Mountin g
Tra ck
Conso le USB CAC Rea der Port
(F1DN102C, F1DN104C
models only)
Console Audio
Input Jack
Secur e DVI-I KVM S witch with Au dio
Console U SB
Keyboa rd Port
PS/2 Console Ports
Console Monitor Port
Computer DVI, USB,
Audio, and CAC Ports
8
Compute r CAC USB Port
(F1DN102C, F1DN104C
models only)
DC Power Jack
Mountin g
Tra ck
Page 11
OVERVIEW
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 82
Specifications
Part No.: F1DN102B, F1DN102C,
F1DN104B, F1DN104C
Enclosure: Metal enclosure with high-impact
plastic faceplate
Power Requirements: 12V DC, 1.5A (minimum)
power adapter with
center-pin-positive polarity
AC Input: 100 to 240VAC
No. of Users Supported: 1
No. of Computers Supported: 2 (F1DN102B, F1DN102C),
4 (F1DN104B, F1DN104C)
Monitor s Supported: Single-link and dual-link digital
DVI-D displays; analog VGA
monitor s with adapter
Resolution Suppor t: Up to 2560x1600
Console Keyboard Input: USB Type A
Console Mouse Input: USB Type A
Console CAC Input: USB Type A (F1DN102C,
F1DN104C models only)
Console Monitor Por t: DVI-I dual-link female
Console Speaker: 3.5mm fe male
CPU Keyboard/Mouse Ports: USB Type B
CPU CAC Ports: USB Type B
CPU Keyboard/Mouse Ports: USB Type B
CPU Audio: 3.5mm fe male
CPU Monitor Por ts: DVI dual-link female
Port Selectors: 2 and 4 respectively for 2- and
4-por t models
LED Indicators: 2 and 4 respectively for 2- and
4-por t models
Operating Temp: 32° to 104° F (0° to 40° C)
Storage Temp: -4° to 140° F (-20° to 60° C)
Humidit y: 0-80% RH, non-condensing
Warrant y: 3 years
Secur e DVI-I KVM S witch with Au dio
9
Page 12
OVERVIEW
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 82
Dimensions:
(F1DN102B) 12.5 (W) x 6.4 (D) x 1.7 (H) inches
(F1DN102C) 12.5 (W) x 6.4 (D) x 1.7 (H) inches
(F1DN104B) 12.5 (W) x 6.4 (D) x 1.7 (H) inches
(F1DN104C) 12.5 (W) x 6.4 (D) x 1.7 (H) inches
Weight:
(F1DN102B) 3.65 lbs.
(F1DN102C) 3.7 lbs.
(F1DN104B) 3.85 lbs.
(F1DN104C) 3.9 lbs.
Made in the USA
Secur e DVI-I KVM S witch with Au dio
10
Page 13
INSTALLATION
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 83
Pre-Configuration
Wher e to p lace the Switch:
The enclosure of the Switch is designed for desk top or under-mount
configuration. An optional Mount Kit (Belkin par t number F1D006) is
available.
Consider the following when dec iding wh ere to place t he Switc h:
• your proximit y to the por t selectors on the front of the Switch
• the lengths of the cables attached to your keyboard, monitor,
and mouse
• the location of your computers in relation to your console
• the lengths of the cables you use to connect your computers
to the Switch
Warning: Avoid placing cables near fluorescent lights,
air-conditioning equipment, or machines that create electrical noise
(e.g., vacuum cleaners).
Secur e DVI-I KVM S witch with Au dio
Connection and Installation
Step 1 Connecting the Console to the Swi tch
Warning: Before at tempting to connect anything to the Switch or your
computers, please ensure that all computer equipment and devices
are powered off.
Connect your monitor, keyboard, mouse, and speaker to the rear of the
Switch in the “User Console” section. (Refer to diagram on page 8.)
Step 2 Power Up
2.1 Power on the monitor.
2.2 Power up the KVM Switch by connecting the power. The display
diagnostic LED should be solid green a few seconds afte r
power up. This indicates the display EDID information has been
captured and secured. If the display diagnostic LED remains
blinking for longer than 10 seconds after powe r up, refer to the
Troubleshooting section of this user manual.
11
Page 14
INSTALLATION
INSTALLATION
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 83
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 83
Step 3 Connecting Computers to the Switch
3.1 Make sure all computer s are powered off.
3.2 Using the Belkin DVI/USB K VM Cable Kit, connect the computers
to a port on the rear of the K VM Switch. (Refer to diagram on
page 8.)
Note: The Cable Kit must be connecte d directly to a fre e USB port
on your computer with no USB hubs or other devices in between.
Refer to the Troubleshooting section of this manual if you are having
problems with the USB keyboard or mouse.
Secur e DVI-I KVM S witch with Au dio
Step 4 Powering Up the Computers
Power up all the attached computers and che ck for display
and peripheral functionality. All computer s can be powered on
simultaneously.
Note: Your computers should recognize the Switch and automatically
install the HID USB driver if necessary.
When you power on your computers, the Switch emulates both a
mouse and keyboard on each por t and allows your computers to
boot normally. The computer connected to por t “1” will be displayed
on the monitor. Check to see that the keyboard, monitor, and mouse
are working normally. Proceed to do this with all occupied ports to
verify that all computer s are connected and responding correctly.
If you encounter an error, check your cable connections for that
computer and reboot. If the problem persists, please refer to the
Troubleshooting section in this User Manual.
12
Page 15
INSTALLATION
Insert color chip Remove color chip
with a standard paperclip
INSTALLATION
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 83
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 83
Color Code Chip Installation
The K VM Switch’s por t-selector buttons can be color-coded for easier
identification. Refer to the installation instructions below.
Note: You may have to remove the existing black color chip first.
Secur e DVI-I KVM S witch with Au dio
Port Name Label
The included network-name labels can be placed in the area
underneath the port-selector buttons for port identification.
13
Page 16
OPERATING THE KVM SWITCH
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 84
Operation
Selecting a Compu ter Using Por t Selectors
Now that you have connected your console and computers to the
Switch, it is ready for use. You can select which computer you wish
to control by pressing the corresponding port selector on the front of
the Switch. The LED number will illuminate to indicate which computer
(or por t) is currently selecte d. It may take approximately 1 second for
the video signal to sync after switching por ts. T his is normal behavior
and is dependent on the display connected. This is normal operation
and ensures that proper synchronization is established bet ween the
monitor and the connected computers.
Keyboard and mouse inputs can only be sent to the selected
computer, and video outputs can only be received from the selected
computer. The Switch also prevents any data transfer between
connected computers, ensuring the security of your computers.
Please note that the default port at power-up is port 1. In case
of a power failure or if the power is cycled, the Switch will
default to port 1.
Secur e DVI-I KVM S witch with Au dio
14
Page 17
COMMON ACCESS CARD (CAC) CONFIGURATION AND INSTALLATION
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 85
Common Access Card (CAC) Configuration and
Operation (F1DN102C, F1DN104C models only)
CAC connection to the computer requires a separate USB cable
connection and allows the user to specify whether there is a
CAC required for that computer or not. This allows the CAC to be
connected and controlled separately to the keyboard, mouse, video,
and audio.
Notice: The CAC functionality was not certified by Common
Criteria. Currently, Common Criteria does not offer any guidelines
for CAC peripheral suppor t in the Peripheral Sharing Protection
Profile. The inclusion of this functionality does not affect the
Common Criteria ce rtification applied to the re st of the product.
Secur e DVI-I KVM S witch with Au dio
Step 1 Ins tallation
1.1 Using the included USB cable, connect one end of the cable to
the computer that requires CAC, and the other end to the CAC
port on the KVM Switch that corresponds to the computer.
1.2 Enable CAC for the same port connection in Step 1.1 by switching
the CAC switch to the right.
1.3 Repeat steps above for additional computers that require CAC.
Make sure that the CAC switch is disabled (left) for all other
non-connected CAC systems.
1.4 Once configured, the CAC connection will be switched only
when required by the connected computer. When switching
from a CAC-enabled port to a non-CAC-enabled port, the CAC
connection will remain with the last previously selected por t where
the CAC was set to “Enable.”
15
Page 18
FREQUENTLY ASKED QUESTIONS
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 86
What does “NIAP Common Criteria vali dation to EAL” mean?
To learn more about NIAP Common Criteria and EAL, visit
http://www.niap-ccevs.org/
What do I do if I fin d that the tamper-evident sea l on the Switch
has been removed or disrupted?
Please call Belkin Technical Support at (800) 282-2355 immediately.
The K VM Switch’s circuitry may have been compromise d.
How fa r can the Switch b e from my computer ?
The Switch can be located up to 15 feet (4.6m) away from your
computer due to DVI- and USB-cable limitation.
Do I have to inst all software to use t he Switc h?
No, the Switch does not require any software to be installed in
your computer s.
Secur e DVI-I KVM S witch with Au dio
Can I use t he S witc h with a computer that does not
support USB?
The Switch is designed to work with USB -capable computers. Call
your sales rep for Secure KVM accessories that allow support of
different input and video formats.
Does the S witch require an AC adapter?
Yes, the Switch requires a 12-volt DC, 1.5-Amp (minimum) power
adapter in order to function properly.
Does the S witch support Linux ?
Yes, the Switch works with Red Hat Linux and other Linux
distributions configured for USB support.
What comp uter equ ipment does t he K VM s upport ?
The Switch is compatible with systems and peripherals from Dell, HP,
ClearCube, W YSE, Microsoft, Logitech, etc. Please contact Belkin
Technical Support at (800) 282-2355 for compatibility issues you
may experience.
16
Page 19
TROUBLESHOOTING
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 87
General
My computer does not boot when connected to the Switch but
works fine when I connect my keyboard, video, and mouse
directly to my computer.
• Make sure that the DVI/USB KVM Cable Kit is connected tightly
between the Switch and the computer.
Video
I am gett ing ghosting, shadowi ng, or fuzzy imag es on
my monitor.
• Check that all video cables are inse rted properly to the Switch,
computer, and monitor.
• With everything connected, power-cycle the K VM Switch to reset
the video. Make sure the Video Diagnostic LED is solid green.
• Check that the monitor you are using supports the resolution and
refresh-rate setting on your computer.
• Lower the video resolution of your monitor.
• Check that the video-cable length does not exceed 15 feet (4.6m).
• Check that the graphics card you are using suppor ts the resolution
and refresh-rate setting on your computer.
• Connec t the monitor directly into the computer you are having
trouble with to see if the problem still appears.
Secur e DVI-I KVM S witch with Au dio
I am getting a black screen on my monitor.
• Check that all video cables are inserted properly.
• Check that there is proper voltage available to the power adapter
and that it is inserted correctly.
• Connec t your monitor directly to the computer to verify that your
monitor is functioning properly.
• Reboot the computer.
The display diagnosti c LED does not stop blinking .
• Check that the cable that connects to the monitor is inserted
properly on both ends.
• Check that the monitor is powered on.
• Power-cycle the KVM unit by removing and reattaching
the power plug.
• Try a different monitor.
17
Page 20
TROUBLESHOOTING
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 87
Keyboard
The computer does not detect my keyboard, or my keyboard does
not work when I switch computers or reboot.
• Check that the keyboard you are using is connected properly to
the Switch.
• Check that the USB cable between the Switch and the computer
is completely connected.
• Try connecting to a different USB port on the computer.
• Make sure the keyboard works when directly plugged into the
computer (the HID USB driver is installed on the computer).
Rebooting may be necessary when trying this.
• Make sure you are not using a keyboard with an integrated USB
hub or other USB-integrate d devices.
• If the computer is coming out of standby mode, allow up to one
minute to regain mouse function.
• Try a dif ferent keyboard.
The CAPS, NUM, and Scroll Lock light s on my keyboard do not
function when I connect to the KVM Switch.
This is normal operation. The lock-state information is fully functional.
Due to the security of the KVM Switch and known exploitation of
lock-state information for leakages, the LED status is not supported.
Please refer to the operating system for verification of the lock-state
information for CAPS, NUM, and Scroll Lock.
Secur e DVI-I KVM S witch with Au dio
Mouse
The computer does not detect my mouse, or my mouse does not
work when I switch computers or reboot.
• Check that the mouse you are using is connected properly
to the Switch.
• Check that the USB cable between the Switch and the computer
is completely connected.
• Try connecting to a different USB port on the computer.
• Make sure the mouse works when directly plugged into the
computer (the HID USB driver is installed on the computer).
Rebooting may be necessary when trying this.
• Make sure you are not using a keyboard with an integrated USB
hub or other USB-integrate d devices.
• If the computer is coming out of standby mode, allow up to one
minute to regain mouse function.
• Try a different mouse.
18
Page 21
INFORMATION
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 88
FCC Statement
DECLAR ATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin Inter national, Inc., of 12045 E. Water front Drive, Playa
Vista, CA 90094, declare under our sole responsibility that the
products: F1DN102B, F1DN102C, F1DN104B, F1DN104C
to which this declaration relates:
Comply with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including inter ference that may cause undesired operation.
CE Declar ation of Conformity
We, Belkin International, Inc., declare under our sole responsibility that
the products F1DN102B, F1DN102C, F1DN104B, F1DN104C, to which
this declaration relates, are in conformity with Emissions Standard
EN55022 and with Immunity Standard EN55024, LVP EN61000-3-2,
and EN61000-3-3.
ICES
This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme á la norme NMB-0 03
du Canada.
Secur e DVI-I KVM S witch with Au dio
Belkin International , Inc., Li mited 3-Year Product Wa rranty
What this warrant y covers .
Belkin International, Inc. (“Belkin”) warrants to the original purchaser
of this Belkin product that the product shall be free of defects in
design, assembly, material, or workmanship.
What the period of cover age is.
Belkin warrants the Belkin product for three years.
What will we do to co rrect problems?
Product Warr anty.
Belkin will repair or replace, at its option, any defective product
free of charge (except for shipping charges for the produc t). Belkin
reser ves the right to discontinue any of its products without notice,
and disclaims any limited warranty to repair or replace any such
discontinued products. In the event that Belkin is unable to repair or
replace the product (for example, because it has been discontinued),
Belkin will of fer either a refund or a credit toward the purchase of
another product from Belkin.com in an amount equal to the purchase
price of the product as evidenced on the original purchase receipt as
discounted by its natural use.
19
Page 22
INFORMATION
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 8
What is not covered by this warranty ?
All above warranties are null and void if the Belkin product is not
provided to Belkin for inspection upon Belkin’s request at the sole
expense of the purchaser, or if Belkin determines that the Belkin
product has been improperly installed, altered in any way, or
tampered with. The Belkin Product War ranty does not protect against
acts of God such as flood, lightning, earthquake, war, vandalism,
theft, normal-use wear and tear, erosion, depletion, obsolescence,
abuse, damage due to low voltage disturbances (i.e. brownouts or
sags), non-authorized program, or system equipment modification
or alteration.
How to get service.
To get ser vice for your Belkin product you must take the
following steps:
1. Contact Belkin International, Inc., at 12045 E. Waterfront Drive,
Playa Vista, CA 900 94, Attn: Customer Service, or call
(800)-223-5546, within 15 days of the Occurrence. Be
prepared to provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
Secur e DVI-I KVM S witch with Au dio
2. Your Belkin Customer Ser vice Representative will then instruct
you on how to forward your receipt and Belkin product and how to
proceed with your claim.
Belkin reserves the right to review the damaged Belkin product. All
costs of shipping the Belkin product to Belkin for inspe ction shall
be borne solely by the purchaser. If Belkin determines, in its sole
discretion, that it is impractical to ship the damaged equipment to
Belkin, Belkin may designate, in its sole discretion, an equipment
repair facility to inspect and estimate the cost to repair such
equipment. The cost, if any, of shipping the equipment to and from
such repair facility and of such estimate shall be borne solely by the
purchaser. Damaged equipment must remain available for inspection
until the claim is finalized. Whenever claims are settled, Belkin
reser ves the right to be subrogated under any existing insurance
policies the purchaser may have.
20
Page 23
INFORMATION
SECTIONSTable of Con tent s 1 2 3 4 5 6 7 8
How st ate law relates to the warrant y.
THIS WARR ANT Y CONTAINS THE SOLE WARRANTY OF BELKIN.
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, E XCEPT AS
REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY
OR CONDITION OF QUALITY, MERCHANTABILIT Y OR FITNESS
FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES,
IF ANY, ARE LIMITED IN DUR ATION TO THE TERM OF THIS
WARRANTY.
Some states do not allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL,
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES
SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS
ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT,
EVEN IF ADVISED OF THE POSSIBILIT Y OF SUCH DAMAGES.
This warrant y gives you specific legal rights, and you may also have
other rights, which may vary from state to state. Some states do not
allow the exclusion or limitation of incidental, consequential, or other
damages, so the above limitations may not apply to you.
Secur e DVI-I KVM S witch with Au dio
21
Page 24
© 2011 Belkin Internatio nal, Inc. All rig hts res erve d. All trade name s are re gister ed trad emarks of
re sp ec ti ve m an uf ac tu re rs li sted . W in do ws , Wi nd ow s V ist a, Mi cro so ft , an d I nt el li Mo use ar e ei th er
re gi st er ed t ra de ma rks or tr adem ar ks of Mi cro so ft C or po rat io n i n th e U ni te d St at es an d/or ot he r
countr ies. Ma c OS and Ma c are tra demar ks of App le Inc., re giste red in the U. S. and oth er coun tries .
Loading...