Belkin F1DG102U User Manual

Package Contents

• Remote

• KVM Switch with Cables

• Audio Extension Cable

Introduction

Congratulations and thank you for purchasing the Flip USB with
Audio KVM Switch. Flip is easy to set up and use, and comes with
everything you need to share one monitor, keyboard, mouse, and one
set of speakers between your two computers. No additional cables or
software are required.

The diagram below shows a typical Flip setup. The remote sits on
your desk and connects—along with your monitor, keyboard, mouse,
and speakers—to the KVM switch. The KVM switch is connected to
your two computers.

KVM switch with cables

System Requirements

Monitor

Flip supports LCD and CRT monitors with VGA connections. You
can also use your DVI monitor with Flip by connecting a VGA adapter
to the DVI cable. Flip does not support direct DVI connections from
monitors.

VGA connection

Keyboard/Mouse

Flip supports any keyboard and mouse with a USB connection.

USB connection

Computers

Flip can be used with PC or Mac® desktop or notebook computers
that support USB keyboard and mouse connections, and that run on
one of these operating systems:

• Windows

• Mac OS

• Linux

®

2000, XP, 2003, Vista™

®

X v10.0 and above

®

Installing your Flip

Before you begin, make sure that your USB keyboard and mouse
work properly with both computers.

1. Power on your computers.

2. Connect your monitor, keyboard, mouse, and speakers to the

KVM switch. Now, connect the remote to the KVM switch.
Place the remote anywhere on your desk.

3. Connect one set of cables to the monitor, USB, and speaker ports

on your first computer. Wait for your computer to recognize the
new USB device ( Flip). Then connect the other set of cables to the
monitor, USB, and speaker ports on your second computer. If the
cable is not long enough to connect to your speaker port, use the
included audio extension cable.

You are now ready to use your Flip.

Using your Flip

When you power up your computers, your first computer’s desktop
will appear on your monitor. You are now ready to use that computer
as if it were directly connected to your monitor, keyboard, mouse,
and speakers.

To switch access to your other computer, simply press the remote.
Your other computer’s desktop will appear on your monitor. You are
now ready to use your other computer as if it were directly connected
to your monitor, keyboard, mouse, and speakers. Press the remote
each time you want to switch access from one computer to the other.

Optional Software

You can install software onto your computers that will allow you to
flip between computers using a desktop icon or keyboard hot-key
sequence. The software will also allow you to listen to music files on
one computer while you work on the other. To download the free Flip
software, please visit our website at www.belkin.com /flip.

The software can be used with computers that run on one of these
operating systems:

• Windows 2000, XP, 2003, Vista

• Mac OS X v10.3 and above

remote

Flip Tip:

Package Contents/Introduction 1 System Requirements 2 Installing your Flip 3 Installing your Flip 4

Keep the KVM switch behind
your computers to keep your
desk free of cable clutter

Note: For a list of frequently asked questions and troubleshooting
tips, please visit our website at www.belkin.com/flip.

Using your Flip 5

Information
FCC Statement

DECLARATION OF CONFORMIT Y WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILIT Y

We, Belkin International, Inc., of 501 West Walnut Street, Compton CA 90220, declare
under our sole responsibility that the product F1DG102U, to which this declaration relates :

Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful inter ference, and ( 2) this device must accept any
interference received, including inter ference that may cause undesired operation.

CE Declar ation of Conformity

We, Belkin Inte rnational, Inc., declare under our sole responsibility that the F1DG102U,
to which this declaration relates, is in conformity with Emissions Standa rd EN55022 and
with Immunit y Standard EN55024, LVP EN61000-3-2, and EN61000 -3-3.

ICES

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme á la norme NMB-003 du Canada.

Belkin International, In c., Limited 2-Year Produ ct Warranty
What this warranty covers.

Belkin International, Inc., warrants to the original purchaser of this Belkin product that
the product shall be free of defects in design, assembly, material, or workmanship.

What the period of coverage is.

Belkin International, Inc., warrants the Belkin product for two years.

What will we do to correct probl ems?

Product Warr anty.

Belkin will repair or replace, at its option, any defective product fre e of charge (except
for shipping charges for the product) .

What is not cove red by th is wa rra nty?

All above warranties are null and void if the Belkin product is not provided to Belkin
International, Inc., for inspection upon Belkin’s request at the sole expense of the
purchaser, or if Belkin International, Inc., determines that the Belkin produc t has
been improperly installed, altered in any way, or tampered with. The Belkin Product
Warranty does not protect against acts of God such as flood, lightning, earthquake,
war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence,
abuse, damage due to low voltage disturbances (i.e. brownouts or sags ), non-authorized
program, or system equipment modification or alteration.

How to get service.

To get ser vice for your Belkin product you must take the following steps:

1. Contact Belkin International, Inc., at 501 W. Walnut St., Compton CA 90220, At tn:
Customer Service, or call ( 800) -223-5546, within 15 days of the Occurrence. Be
prepared to provide the following information:

a. The par t number of the Belkin product.

b. Where you purchased the product.

c. When you purchased the product.

d. Copy of original receipt.

2. Your Belkin Customer Service Representative will then instruct you on how to forward
your receipt and Belkin product and how to proceed with your claim.

Belkin International, Inc., reserves the right to review the damaged Belkin product. All
costs of shipping the Be lkin product to Belkin International, Inc., for inspection shall
be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is
impractical to ship the damaged equipme nt to Belkin International, Inc., Belkin may
designate, in its sole discretion, an equipment repair facilit y to inspect and estimate
the cost to repair such equipment. The cost, if any, of shipping the equipment to and
from such repair facility and of such estimate shall be borne solely by the purchaser.
Damaged equipment must remain available for inspection until the claim is finalized.
Whenever claims are set tled, Belkin International, Inc., reser ves the right to be
subrogated under any existing insurance policies the purchaser may have.

How st ate law relates to the warr ant y.

THIS WARRANTY CONTAINS THE SOLE WARR ANT Y OF BELKIN INTERNATIONAL ,
INC., THERE ARE NO OTHER WARRANTIES, E XPRESSED OR, EXCEPT AS REQUIRED
BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF
QUALIT Y, MERCHANTABILITY OR FITNESS FOR A PARTICUL AR PURPOSE, AND
SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF
THIS WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above
limitations may not apply to you.

IN NO EVENT SHALL BELKIN INTERNATIONAL, INC., BE LIABLE FOR INCIDENTAL,
SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT
NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF
ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

This warranty gives you specific legal rights, and you may also have other rights, which may
vary from state to state. Some states do not allow the exclusion or limitation of incidental,
consequential, or other damages, so the above limitations may not apply to you.

Flip

USB with Audio
KVM Switch

Belkin Ltd.

Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
[phone]
[phone] fax

Belkin Tech Support

US: 800-223-5546 ext. 2263
310-898-1100 ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
Europe: www.belkin.com/support

Belkin International, Inc.

501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax

© 2007 Belkin International, Inc. All rights reserved. All trade names are registered trademarks
of respective manufacturers listed. Mac and Mac OS are trademarks of Apple Inc., registered
in the U.S. and other countries. Windows and Windows Vista are either registered trademarks
or trademarks of Microsoft Corporation in the United States and/or other countries

Belkin Ltd.

4 Pioneer Avenue
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
[phone]
[phone] fax

Belkin B.V.

Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
[phone]
[phone] fax

Flip

USB with Audio
KVM Switch

Information 6

Information 7

P75114-B

User Guide

F1DG102U