Belkin F1DF102P User Manual

Package Contents

• Remote

• Base with Cables

Introduction

Congratulations and thank you for purchasing the Flip PS/2 KVM
Switch. Flip is easy to set up and use, and comes with everything
you need to share one monitor, keyboard, and mouse between
your two computers. No additional cables or software are required.

System Requirements

Installing your Flip

Before you begin, make sure that both computers are powered off.

Monitor

Flip supports any LCD or CRT monitor with a VGA connection.
You can also use your DVI monitor with Flip by connecting a VGA
adapter to the DVI cable. Flip does not support direct DVI connections
from monitors.

VGA connection

1. Connect your monitor, keyboard, and mouse to the base. Now,

connect the remote to the base. Place the remote anywhere on
your desk.

2. Connect the cables to the monitor, keyboard, and mouse ports on

your two computers.

Using your Flip

When you power on your computers, your first computer’s desktop will
appear on your monitor. You are now ready to use that computer as if
it were directly connected to your monitor, keyboard, and mouse.

To switch access to your other computer, simply press the remote.
Your other computer’s desktop will appear on your monitor. You are
now ready to use your other computer as if it were directly connected
to your monitor, keyboard, and mouse. Press the remote each time
you want to switch access from one computer to the other.

The diagram below shows a typical Flip setup. The remote sits
on your desk and connects—along with your monitor, keyboard,
and mouse—to the cable base. The base is connected to your
two computers.

base with cables

remote

Package Contents/Introduction

Keyboard/Mouse

Flip supports any keyboard and mouse with a PS/2 connection.

PS/2 connection

Computers

Flip can be used with any PC desktop or notebook computer that

3.

supports PS/2 keyboard and mouse connections, and that runs on

Power on your computers.

one of these operating systems:

• Windows

• Linux

1 System Requirements 2 Installing your Flip 3 Installing your Flip 4

®

98 SE, 2000, XP, 2003

®

Flip Tip:

You can use the included fastener strip
to attach the remote to your monitor,
keyboard, or other desk item.

You are now ready to use your Flip.

Flip Tip:
Keep the base behind your computers to
keep your desk free of cable clutter.

Note: For a list of frequently asked questions and troubleshooting tips,
please visit our website at www.belkin.com/flip.

Using your Flip 5

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY

We, Belkin International, Inc., of 501 West Walnut Street, Compton CA 90220, declare
under our sole responsibility that the product F1DF102P, to which this declaration relates:

Complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

CE Declar atio n of Conformit y

We, Belkin International, Inc., declare under our sole responsibility that the F1DF102P, to
which this declaration relates, is in conformity with Emissions Standard EN55022 and with
Immunity Standard EN55024, LVP EN61000-3-2, and EN61000-3-3.

ICES

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique
de la classe B est conforme á la norme NMB-003 du Canada.

Belkin Internatio nal, Inc., Limited 2-Year Product Wa rranty
What this warr ant y cove rs.

Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin
product that the product shall be free of defects in design, assembly, material, or
workmanship.

What the period of covera ge is .

Belkin warrants the Belkin product for two years.

What will we do to cor rect problems?

Product Warr anty.

Belkin will repair or replace, at its option, any defective product free of charge (except for
shipping charges for the product).

What is not covered by this warrant y?

All above warranties are null and void if the Belkin product is not provided to Belkin
for inspection upon Belkin’s request at the sole expe nse of the purchaser, or if Belkin
determines that the Belkin product ha s been improperly installed, altered in any way,
or tampered with. The Belkin Product Warranty does not protect against acts of God
such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear,
erosion, depletion, obsolesce nce, abuse, damage due to low voltage disturbances
(i.e. brownouts or sags), non-authorized program, or system equipment modification
or alte ration.

How to get service.

To get ser vice for your Belkin product you must take the following steps:

1. Contact Belkin International, Inc., at 501 W. Walnut St., Compton CA 90220,
Attn: Customer Service, or call ( 800 )-223-5546, within 15 days of the Occurrence.
Be prepared to provide the following information:

a. The part number of the Belkin product.

b. Where you purchased the product.

c. When you purchased the product.

d. Copy of original receipt.

2. Your Belkin Customer Ser vice Representative will then instruct you on how to forward
your receipt and Belkin product and how to proceed with your claim.

Belkin reserves the right to review the damaged Belkin product. All Belkin reserves the
right to review the damaged Belkin product. All costs of shipping the Belkin product to
Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its
sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may
designate, in its sole discretion, an equipment repair facility to inspect and estimate the
cost to repair such equipment. The cost, if any, of shipping the equipment to and from
such repair facility and of such estimate shall be borne solely by the purchaser. Damaged
equipment must remain available for inspection until the claim is finalized. Whenever claims
are settled, Belkin reserves the right to be subrogated under any existing insurance policies
the purchaser may have.

How st ate l aw re lates to the warran ty.

THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE
NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW,
IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY,
MERCHANTABILIT Y OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH
IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF
THIS WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above
limitations may not apply to you.

IN NO E VENT SHALL BELKIN BE LIA BLE FOR INCIDENTAL, SPECIAL, DIRECT,
INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED
TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY
BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

This warranty gives you specific legal rights, and you may also have other rights, which
may vary from state to state. Some states do not allow the exclusion or limitation of
incidental, consequential, or other damages, so the above limitations may not apply to you.

Flip

PS/2
KVM Switch

Belkin Tech Support

US: 800-223-5546 ext. 2263
310-898-1100 ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
Europe: www.belkin.com/support

Belkin International, Inc.

501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax

© 2007 Belkin International, Inc. All rights reserved. All trade names are registered
trademarks of respective manufacturers listed. Windows is either a registered trademark or
trademark of Microsoft Corporation in the United States and/or other countries.

Belkin Ltd.

Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
[phone]
[phone] fax

Belkin Ltd.

4 Pioneer Avenue
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
[phone]
[phone] fax

Belkin B.V.

Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
[phone]
[phone] fax

Flip

PS/2
KVM Switch

Information 6

Information 7

P75111-B

User Guide

F1DF102P