Belkin F1DD102U, F1DD104U User Manual

™

OmniView

KVM Switch with Audio

Control multiple DVI/USB computers with one USB keyboard and mouse, and DVI monitor

User Manual

SOHO Series

F1DD102U F1DD104U

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Overview

Feature Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Equipment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Unit Display Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Pre-Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Step-by-Step Installation Guide

Installing the Switch Base . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Installing the HID USB Driver . . . . . . . . . . . . . . . . . . . . . . . . .10

Connecting the Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Connecting the PCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Powering Up the Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Using Your KVM Switch

Selecting a Computer Using Direct-Access Port Selectors . . . . . . . .15

Selecting a Computer Using Keyboard Hot Key Commands . . . . . . .15

AutoScan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Connecting USB Devices to the Built-In 2-Port Hub . . . . . . . . . . .16

Belkin KVM Switches and Accessories

OmniView KVM Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

OmniView KVM Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

OmniView KVM Accessories and Adapters . . . . . . . . . . . . . . . . . .22

FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Warranty, FCC, ICES, and CE Statements . . . . . . . . . . . . . . . . . . . . .28

INTRODUCTION

Congratulations on your purchase of the Belkin OmniView SOHO Series KVM Switch with Audio (the KVM Switch). Our diverse line of quality KVM solutions exemplifies the Belkin commitment to delivering high-quality, durable products at a competitive price. Engineered to give you control over multiple computers/servers from one console, Belkin KVM Switches come in a variety of capacities suitable for all configurations, large or small. This compact, affordable Belkin OmniView KVM Switch is backed by a Belkin Five-Year Warranty and free technical support.

This manual will provide details about your new KVM Switch, from installation and operation, to troubleshooting—in the unlikely event of a problem.

For easy installation, please refer to the Quick Installation Guide included with your KVM Switch.

Thank you for purchasing the Belkin OmniView SOHO Series KVM Switch with Audio. We appreciate your business and have confidence that you will soon see for yourself why over 1 million Belkin OmniView KVM Switches are being used worldwide.

Contents of Package:

•OmniView SOHO Series KVM Switch with Audio

•Attachable Base

• DB25 to RJ45 Flash Cable

•User Manual

• Quick Installation Guide

• Registration Card

• 9V DC, 1A Power Supply

OVERVIEW

Feature Overview

The OmniView SOHO Series KVM S witch with Audio (the KVM Switch) allows you to control up to four computers, with one USB keyboard and USB mouse and a DVI-D video monitor.

USB Hot Keys

Hot keys allow you to select ports using designated key commands from your USB keyboard. Control up to two (for the 2-port unit) or four (for the 4-port unit) computers, using a simple hot key sequence on your keyboard.

AutoScan

The AutoScan feature allows you to automatically scan and monitor the activities of all operating computers connected to your KVM Switch, one by one.

Video Resolution

The KVM Switch supports video resolutions of up to 1600x1200@60Hz. To preserve signal integrity at high resolutions, Belkin KVM Cables for SOHO Series with Audio (Belkin part number F1D9201-XX) are recommended.

Flash Upgrade

Flash upgradeability allows you to obtain the latest firmware upgrades for your KVM Switch. These upgrades will let your KVM Switch continue to be compatible with the latest devices and computers. Firmware upgrades are free for the lifetime of the product. Visit belkin.com for upgrade information and support, or see the enclosed instruction document.

Microphone/Audio Support

The KVM Switch supports USB-type speakers and microphones and has built-in microphone and speaker jacks to support the growth of multimedia use in small-office and home-office environments. This feature eliminates the need to disconnect and reconnect these devices when switching between computers, and reduces the clutter on your desktop with fewer speakers.

OVERVIEW

Direct-Access Port Selectors

Direct-access port selectors, conveniently located on the front face of the KVM Switch, allow for simple, manual port selection.

Cable Management

The designed enclosure offers built-in cable management to contain connected cables. Once the cables have been connected and the shroud slid into place, the cables are conveniently maintained through the back opening.

LED Display

An LED display is added to the face of the KVM Switch for easy status monitoring. A lit LED indicates which computer the console has control of. The corresponding direct-access port selector is located next to the LED. When pushed, the LED should light next to the port selector.

USB Device Ports

Two USB device ports allow you to add shared peripherals. This reduces cable clutter and eliminates the need to disconnect and reconnect devices when switching between computers.

OVERVIEW

Equipment Requirements

Cables

For each USB computer to be connected to the KVM Switch, one DVI cable and one USB cable is necessary.

To support resolutions of up to 1600x1200@60Hz, use Belkin KVM Cables for SOHO Series with Audio (Belkin part number F1D9201-XX) to preserve signal integrity. Cables must have DVI male to DVI male connectors.

Belkin OmniView KVM Cables for SOHO Series with Audio offer the highest quality possible to ensure that your data is optimally transmitted and include PC99 color-coded connectors for easier identification and connection. The following cables are recommended for your KVM Switch:

F1D9201-XX (USB Style)

-XX denotes the length in feet. Available in 6- and 10-foot lengths.

OVERVIEW

Operating Systems

Your KVM Switch is for use on CPUs using:

Platforms

•Windows®98/2000/Me/XP, Mac®OS*, Linux®*

*with USB support

Keyboards

• Supports 101-/102-/104-/107-key USB keyboards

Mice

•USB-compatible USB mice with 2, 3, 4, or 5 buttons

Monitors

• DVI-D

•VGA (with DVI to DB15 adapter)

• SVGA (with DVI to DB15 adapter)

•MultiSync

Microphone

•Multimedia microphone with 3.5mm connectors

Audio

•Multimedia speaker/stereo with 3.5mm connectors

(with DVI to DB15 adapter)

Power Supply

• 9V 1A power supply required (center pin positive)

Unit Display Diagrams

The front of the KVM Switch

•Direct-access port selector

• LED for identification of selected port

• Removable shroud

The back of the KVM Switch:

2nd computer DVI port—DVI 2

2nd computer USB port—USB 2

OVERVIEW

2nd computer audio/microphone jacks

1st computer audio/microphone jacks

1st computer USB port—USB 1

Console USB mouse

Console USB keyboard

RJ45 flash port

1st computer DVI port–DVI 1

Console audio/microphone jacks

USB device ports

Console DVI port

9V 1A power jack

OVERVIEW

Where to Place the KVM Switch

The compact size of the KVM Switch makes it perfect for desktop placement. Consider the following when deciding where to place the KVM Switch: whether or not you intend to use the direct-access port selectors; the length of the cables attached to your keyboard, mouse, and monitor; the location of your CPUs from your Console; and the length of the cables you will use to connect your computers to the KVM Switch.

Cable Distance Requirements

USB signals are the strongest when transmitted up to 15 feet between the KVM Switch and the CPU. Beyond 15 feet, probability of signal degradation increases, which can cause the device to fail.

Cautions and Warnings

Avoid having cables near fluorescent lights, air conditioning equipment, or machines that create electrical noise (e.g., vacuum cleaners).

OVERVIEW

Specifications

Part No.: F1DD102U, F1DD104U Power: 9V DC, 1A power adapter (required) PCs Supported: 2 (F1DD102U), 4 (F1DD104U) Monitor Supported: VGA and SVGA MultiSync, LCD (with DVI to VGA

Adapter), DVI-D monitors

Max Resolution: 1600x1200@60Hz Keyboard Input: USB Mouse Input: USB USB Device Ports: 2 Audio Input/Output: 3.5mm jack (stereo) Microphone Input/Output: 3.5mm jack Video Port: 24-pin DVI type CPU Connectors: DVI-I and USB “B” type LED Indicators: 2 (F1DD102U), 4 (F1DD104U) Enclosure: High-impact plastic Dimensions:

F1DD102U

6.75 (h) x 4.25 (w) x 7.75 (d) inches

F1DD104U

7.75 (h) x 4.75 (w) x 9.5 (d) inches

Weight:

F1DD102U 1.5 lbs. F1DD104U 2.0 lbs.

Operating Temp: 32° to 104° F Storage Temp: -4° to 140° F Humidity: 0-80% RH, non-condensing Warranty: 5 years

Note: Specifications are subject to change without notice.

+ 21 hidden pages