Belkin F1DA108T, F1DA116T User Manual

™

OmniView

PRO2 Series KVM Switch

PRO2 Series

User Manual

F1DA104T F1DA108T F1DA116T

TABLE OF CONTENTS

Overview

Feature Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Equipment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Unit Display Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Installation

Pre-Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Step-by-Step Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Single PRO2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Connecting Multiple PRO2s (Daisy-Chaining) . . . . . . . . . . . . . . . . . . .12

Powering up the Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Using your PRO2

Selecting a Computer Using Keyboard Hot Key Commands . . . . . . . . .17

AutoScan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Selecting a Computer Using Direct-Access Port Selectors . . . . . . . . . . .18

Bank Up and Bank Down Scroll Buttons . . . . . . . . . . . . . . . . . . . . . . .18

On-Screen Display Menu Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Belkin KVM Switches and Accessories

OmniView KVM Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

OmniView All-In-One KVM Cables . . . . . . . . . . . . . . . . . . . . . . . . . . .25

OmniView Accessories and Adapters . . . . . . . . . . . . . . . . . . . . . . . . . .26

PRO2 Series FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

™

OmniView

Congratulations on your purchase of this Belkin OmniView PRO2 Series KVM Switch (the PRO2). Our diverse line of KVM solutions exemplifies the Belkin commitment to delivering high-quality, durable products at a reasonable price. Designed to give you control over multiple computers and servers from one console, Belkin PRO2s come in a variety of capacities suitable for all configurations, large or small.

Belkin has designed and developed this PRO2 with the server administrator in mind. The result is a KVM Switch that surpasses any other switch on the market. The PRO2 is engineered to work with the most advanced server room and laboratory environments, offering intuitive port indicators, direct-access port selectors, high video resolution support, and flash upgradeable firmware. The PRO2 also comes with an unparalleled Belkin Five-Year Warranty.

This manual will provide details about your new PRO2, from installation and operation to troubleshooting—in the unlikely event of a problem.

For quick and easy installation, please refer to the Quick Installation Guide included in your PRO2 packaging.

Thank you for purchasing the PRO2. We appreciate your business and have confidence that you will soon see for yourself why over 1 million Belkin OmniView products are being used worldwide.

Package Contents

• OmniView PRO2 Series KVM Switch

• Adjustable Rack-mount Brackets with Screws

• DB25-to-RJ45 Parallel Flash Cable

• User Manual

• Quick Installation Guide

• 12-Volt DC, 1-Amp Power Supply

• Registration Card

PRO2 Series KVM Switch

OVERVIEW

The PRO2s allow you to control up to a maximum of 256 computers with one keyboard, monitor, and mouse. They support PS/2 input devices (keyboard and mouse) as well as VGA, SVGA, XGA, and XGA-2 video.

They support both PS/2 and USB output. This enables cross-platform control over PCs and USB-based computers including USB Sun

™

workstations and

Mac

computers.

Feature Overview

Hot Keys:

Hot key functionality allows you to select a desired port using designated key commands. By using a simple hot key sequence on your keyboard, selecting one computer from as many as 256 computers is instantaneous. For a listing of complete hot key instructions and commands, see pages 17-19.

AutoScan:

The AutoScan feature allows you to set your PRO2 to scan and monitor the activities of all operating computers connected to the switch—one by one. The time interval allotted for each computer can be defined or adjusted through the On-Screen Display (OSD) menu. For complete instructions on AutoScan usage, please refer to page 18.

Video Resolution:

Through a 400MHz bandwidth, the PRO2s support video resolutions of up to 2048x1536@85Hz. To preserve signal integrity at these higher resolutions, your PRO2 requires 75-Ohm coaxial VGA cabling.

Flash Upgrade:

Flash upgradeable firmware allows you to install the latest firmware for your PRO2. This enables your PRO2 to maintain consistent compatibility with the latest devices and computers. Firmware upgrades are free for the life of your PRO2. Refer to the enclosed flash upgrade instruction document or visit us at belkin.com for complete upgrade information and support.

On-Screen Display (OSD):

The OSD feature simplifies server management by allowing you to assign individual names to each connected server throughout the system. It provides a visual means of switching between computers and setting the time interval for the AutoScan function.

OVERVIEW

Front-Panel Push Button:

Direct-access port selectors, located conveniently on the front panel of the PRO2, allow for simple, manual port-selection. Each button controls a port.

LED Display:

An LED display on the face of the PRO2 serves as a status monitor. An LED next to each direct-access port selector illuminates to indicate that the console currently controls the corresponding computer. As a port selector is pushed, the LED next to it will light up. A flashing port LED indicates that there is no computer connected to that port.

Seven-Segment LED Display:

When daisy-chaining multiple PRO2s together, the seven-segment LED display serves as a quick indicator of the selected BANK.

Equipment Requirements

Cables:

To connect to the PRO2, each PS/2 computer requires one VGA cable, one PS/2 keyboard cable, and one PS/2 mouse cable. Keyboard and mouse cables must have PS/2 male-to-PS/2 male connectors. Each USB computer requires one VGA cable and one USB A-to-B cable.

Video resolution support of up to 2048x1536@85Hz requires use of a 75-Ohm coaxial VGA cable to preserve signal integrity. VGA cables must have HDDB15 female-to-HDDB15 male connectors.

Belkin highly recommends that you use OmniView All-In-One PRO Series Plus or Gold Series Cables. These cables offer the highest quality possible to ensure optimal data transmission. All-In-One Cables are molded together for a clean and organized setup; are double-shielded to reduce EMI/RFI interference; have strain-relief construction for added durability; come with a ferrite bead for noise immunity; and include PC99 color-coded connectors for easy identification and connection. The PRO Series Plus Cables include an industry-standard, 14-pin, coaxial VGA cable and nickel-plated connectors for high-resolution applications. The Gold Series Cables have a custom, 15-pin, coaxial VGA cable and gold-plated connectors for superior clarity, connectivity, and error-free data transmission. OmniView Cables are

available in both USB and PS/2 connector types. The following cables are recommended for your PRO2:

OmniView All-In-One PRO Series Plus

F3X1105-XX (PS/2 Style) F3X1962-XX (USB Style)

OmniView All-In-One Gold Series

F3X1835-XX-GLD (PS/2 Style) F3X1895-XX-GLD (USB Style)

(-XX denotes length in feet)

Operating Systems

OmniView PRO2 Series KVM Switches are for use on CPUs using:

Platforms:

• Windows®95/98/2000/Me/NT®/XP

• DOS

• Turbolinux®and all Linux®distributions

• Novell®NetWare®4.x/5.x

• Mac (with USB support)

• Sun (with USB support)

Keyboards:

• Supports 101-/102-/104-key keyboards

Mice:

• Microsoft®system-compatible PS/2 or PS/2 & USB combo mice (with PS/2 adapter) having 2, 3, 4, or 5 buttons

• Microsoft system-compatible PS/2 wireless or optical mice

Monitor:

• VGA

• SVGA

• MultiSync

OVERVIEW

USB Style

PS/2 Style

OVERVIEW

Side View of the PRO2:

BANK DIP switch (may be located on the back in some models)

FLASH DIP switch (may be located on the back in some models)

F1DA108T

BANK

3456 1234

FLASH

OVERVIEW

USB

Direct-access port selector

LED for selected port identification

Manual BANK scroll buttons

7-segment LED for selected BANK identification

AutoScan button

Master Input/Slave Output

Console VGA

Computer VGA port

Console PS/2 mouse/keyboard ports

Computer PS/2 mouse/keyboard ports

Computer USB port

DC power jack

Flash upgrade port

Slave Input

Back View of the PRO2:

F1DA108T

Front View of the PRO2:

OVERVIEW

Specifications

Part No.: F1DA104T, F1DA108T & F1DA116T Power: 12-Volt DC, 1-Amp power adapter with center-pin positive polarity Daisy-Chain: Maximum of 16 KVM Switches Computer Connections Supported:

4 (F1DA104T) 8 (F1DA108T) 16 (F1DA116T)

Keyboard Emulation: PS/2 Mouse Emulation: PS/2 Monitors Supported: VGA, SVGA, MultiSync, and LCD (optional adapter may

be required)

Max. Resolution: 2048x1536@85Hz Bandwidth: 400MHz Keyboard Input: 6-pin miniDIN (PS/2) Mouse Input: 6-pin miniDIN (PS/2) VGA Port: 15-pin HDDB type Port LED Indicators: 4 (F1DA104T)

8 (F1DA108T) 16 (F1DA116T)

Enclosure: Metal enclosure with high-impact plastic faceplate Dimensions:

(F1DA104T) 11 x 1.75 x 6 inch (279mm x 44.5mm x 150mm) (F1DA108T)17.25 x 1.75 x 7.5 inch (438mm x 44.5mm x 190mm) (F1DA116T) 17.25 x 3.5 x 7.5 inch (438mm x 89mm x 190mm)

Weight:

(F1DA104T) 5.3 lbs. (2414.5 grams) (F1DA108T) 9.2 lbs. (4181.5 grams) (F1DA116T) 12 lbs. (5472.5 grams)

Operating Temp.: 32° to 104° F (0~40° C) Storage Temp.: -4° to 140° F (20~60° C) Humidity: 0-80% RH, non-condensing Warranty: 5 years

Note: Specifications are subject to change without notice.

Pre-Configuration

Where to Place the PRO2:

The enclosure of the PRO2 is designed for standalone or rack-mount configuration. The 8- and 16-port PRO2s are natively rack-mountable in standard 19-inch server racks. Rack-mount hardware is included with these switches for a study rack installation. An optional rack-mount kit (F1D005) is available for use with the 4-Port PRO2.

Consider the following when deciding where to place the PRO2:

• whether or not you intend to use the direct-access port selectors;

• the lengths of the cables attached to your keyboard, monitor, and mouse;

• the location of your CPUs in relation to your console;

• and the lengths of the cables you use to connect your computers to the PRO2.

Cable Distance Requirements:

For PS/2 computers:

VGA signals transmit best up to 25 feet. Beyond that length, the probability of video degradation increases. For this reason, we recommend that the length of the cables between the PRO2 and the connected computers does not exceed 25 feet.

Note: If you need your console to reside further than 25 feet from the PRO2, we recommend using the Belkin CAT5 Extender (F1D084) with a standard CAT5 UPT cable. By using this device, you may increase the distance between your PRO2 and your keyboard, mouse, and monitor by as much as 500 feet without risking signal degradation.

For USB computers:

USB signals can be transmitted up to 15 feet between the PRO2 and the CPU. Beyond 15 feet, the probability of signal failure is likely, and this may cause the device to fail.

Cautions and Warnings:

Avoid placing cables near fluorescent lights, air conditioning equipment, or machines that create electrical noise (e.g., vacuum cleaners).

INSTALLATION

Step-by-Step Installation Guide

Cautions and Warnings:

Before attempting to connect anything to the PRO2 or your computer(s), please ensure that everything is powered off. Plugging and unplugging cables while computer(s) are powered on may cause irreversible damage to the computer(s) and/or the PRO2(s). Belkin Components is not responsible for damage caused in this way.

Installing the PRO2 into a Server Rack:

Bracket Installation (F1DA108T and F1DA116T only)

Eight- or 16-Port PRO2s include adjustable mounting brackets ideal for installation in 19-inch racks. The mounting brackets feature three adjustment positions to allow the faceplate of the PRO2 to mount flush to your rack-mounted servers, or to the rack. Please follow these simple steps to achieve the desired adjustment. The 4-Port PRO2 requires an optional mounting kit (F1D005).

1. Remove the adjustable brackets from the box. (The adjustable brackets allow you to set the PRO2’s face flush with the ends of the rails or to extend the PRO2 past the front of the rails).

2. Determine how far you would like the PRO2 to protrude from the rack. Select a bracket-hole scheme.

3. Attach the bracket to the side of your PRO2 using the Phillips screws provided. (Refer to diagram above).

4. Mount the PRO2 to the rack rail assembly.

Note: If this PRO2 will be daisy-chained to another PRO2, set the BANK address prior to installing on a rack. Refer to the section in this user manual labeled “Connecting Multiple PRO2s (Daisy-Chaining)”.

INSTALLATION

Your PRO2 is now mounted securely into the bracket and you are ready to connect cables to the back of the unit.

Note for Belkin PRO Series owners (F1D104-OSD, F1D108-OSD, F1D116-OSD): Installation for the PRO has changed. Please follow this installation manual completely to assure proper installation. Failure to do so may result in keyboard or mouse errors, and/or faulty operation.

Single PRO2 Installation

This section provides complete instructions for the hardware setup of a single PRO2. (F1DA104T, F1DA108T, and F1DA116T)

PS/2 Installation: Keyboard, Video, and Mouse Connections

Connect the Console:

1. Connect the monitor to the PRO2. Attach your monitor cable to the HDDB15 female port on the back of the PRO2 labeled "Console VGA".

2. Connect the PS/2 keyboard cable to the keyboard port on the back of the PRO2 in the "Console" section.

3. Connect the PS/2 mouse cable to the mouse port on the back of the PRO2 in the "Console" section.

Attach the power supply to the DC power jack labeled "DC 12V, 1A" located on the rear of the PRO2. Once the power is connected to a power source, the LED for port 01 will begin flashing. Sequentially push the direct-access port selectors for ports 01 through 08 (04 for F1DA104T and 16 for F1DA116T). The corresponding LED should flash as each button is pressed, indicating that the port is ready for connecting your servers (computer connection).

VGA

USB

06 06

num lock

cap lock

pg up

return

shift clt

alt

delete

[

]

PG UP

PG DN

HOME

HELP

CAPS

ESC

OPT

F10

F11

76543

VGA

USB

06 06

+ 25 hidden pages