Belkin F1D201 User Manual
P73357 F1D201
2-Port Reverse
KVM Switch
User Manual
FCC/CE Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if no installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio technician for help.
CE Declaration of Conformity
We, Belkin Components, declare under our sole responsibility that the
F1D201, to which this declaration relates, is in conformity with Generic
Emissions Standard EN50081-1 and with Generic Immunity Standard
EN50082-1 1992.
Belkin Components B.V.
Diamantlaan 8 • 2132 WV
Hoofddorp • The Netherlands
Tel: +31 (0) 235698765
Fax: +31 (0) 235612694
Belkin Components, Ltd.
Unit 13 • Gatelodge Close • Round Spinney
Northampton • Northants • NN3 8RX
United Kingdom
Tel: +44 (0) 1604678300
Fax: +44 (0) 1604678330
belkin.com
Belkin Components
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
© 2000 Belkin Components. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
Information
5
Warranty Information
Belkin Components One Year Product Warranty
Belkin Components warrants this product against defects in materials
and workmanship for one year. If a defect is discovered, Belkin will, at its
option, repair or replace the product at no charge provided it is returned
during the warranty period, with transportation charges prepaid, to the
authorized Belkin dealer from whom you purchased the product. Proof
of purchase may be required. This warranty does not apply if the product
has been damaged by accident, abuse, misuse, or misapplication; if the
product has been modified without the written permission of Belkin; or if
any Belkin serial number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE
EXCLUSIVE AND IN LIEU OF ALL OTHERS, WHETHER ORAL OR
WRITTEN, EXPRESS OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT
LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any modification,
extension, or addition to this warranty.
F1D201 Rear
Rear of PC
3. Connect the PS/2 ends to the keyboard and mouse port, paying
particular attention to which cable connects to which port.
They are not interchangeable.
Introduction
Thank you for purchasing the Belkin Components 2-Port Reverse KVM
Switch! Now, you and a colleague can use one computer from two
keyboards, mice, and monitors. Ideal for training or workstation sharing.
Switching between consoles is completely automatic, and the computer
does not even know the difference.
Package Contents
■ 2-Port Reverse KVM Switch ■ This manual
■ PS/2 KVM cable, 3-foot ■ Registration card
■ Power adapter, 9VDC, 600mA
Product Detail
F1D201 Front View F1D201 Rear View
Console 1
Output
Keyboard
Mouse
Console 2
Output
Keyboard
Mouse
DC Power Jack (on the side)
Computer
Input
Keyboard
Mouse
Monitor
Monitor 2
Output
Monitor 1
Output
Installation
1. Power off your computer.
2. Using the included KVM cable, connect the male VGA end to the
VGA port on your computer.
Installation (continued)
4. Connect the female end of the VGA cable to the male VGA input
port on the back of the Reverse KVM Switch.
5. Connect the PS/2 cables to their appropriate keyboard or mouse
input ports at the back of the Reverse KVM Switch.
F1D201 Rear
Rear of PC
F1D201 Rear
Keyboard
Mouse
F1D201 Rear
2 3
Keyboard
Mouse
Topside LEDs
F1D201 Rear
7. Connect your keyboards and mice to the console ports at the front
of the Reverse KVM Switch.
8. Plug in the power adapter into the power jack of the Reverse
KVM and plug the adapter into an AC receptacle.
F1D201 Front
DC Power Jack (on the side)
Power Adapter
Installation (continued)
F1D201 Front
4
That’s it! You’re done!
You may power up your PC now.
6. Connect your monitors to the back of the Reverse KVM Switch.
PS/2 MOUSE
PS/2 KEYBOARD
PARALLEL
AT SERIAL
PC SERIAL
VGA MONITOR
RJ45 NETWORK
USB 1
USB 2
AT KEYBOARD
PS/2 MOUSE
PS/2 KEYBOARD
PARALLEL
AT SERIAL
PC SERIAL
VGA MONITOR
RJ45 NETWORK
USB 1
USB 2
AT KEYBOARD
Loading...