Belkin F1D104 User Manual
The OmniView S E 4-Port
User Manual
P72464 F1D104
The OmniView S E 4-Port
User Manual
™
Thank you for purchasing the Belkin Components OmniView™SE KVM switch.
Controlling multiple PCs from one keyboard, mouse and monitor has never been
easier!
The OmniView
™
SE puts you in control. Compatible with AT and PS-2 style computers,
it is loaded with features such as Integrated Mouse Conversion Technology, separate
DB25 daisy-chain ports, and an optional 19"(48.3cm) rackmount kit. It has complete
keyboard and mouse emulation for error-free boot-ups, plus Microsoft
®
Intellimouse
®
support. The OmniView™SE is also designed to handle the most demanding
resolutions up to 1600 x 1200, without any noticeable degradation in image quality.
Switching can be done through convenient front-panel pushbutton, or keyboard “Hot”
key commands. And if you wish to control a Macintosh computer, simply add the
Belkin MAC Adapter
™
for even more system control.
1
Introduction
• Allows a user to control four computers from one keyboard, mouse and monitor
• Integrated Mouse Conversion Technology allows connection of AT-style computers
that have serial mouse ports while using a PS/2 mouse only at the console
• Keyboard and mouse emulation for error-free boot-ups
• Microsoft®Intellimouse®and Intellimouse®Pro support
• Up to 1600 x 1200 resolution support
• DB25 Daisy-Chain ports - allows control over more computers by adding more
OmniView™SE units
• Supports both AT and PS/2 style keyboards (AT requires AT-PS/2 adapter)
• Supports VGA, SVGA and Multisync monitors
• Uses inexpensive and commonly found standard cables
• Pushbutton or keyboard “Hot” key command switching
• AutoScan mode for even more convenience
• Audible feedback when switching
• Recalls CAPS LOCK, NUM LOCK and SCROLL LOCK keys' status for each
computer automatically
• Front-panel status LEDs
• Works with OmniView
™
PS/2 MAC Adapter
™
• No software required
• One year product warranty
Package Contents
OmniView™SE 4-Port F1D104
9VDC, 600mA power supply F1D065-PWR
This manual P72464
Registration card P72009
Features
Technical Specifications
Console Connectors:
Keyboard: 6 pin Mini DIN female
Mouse: 6 pin Mini DIN female (for PS/2 mouse)
DB9 male (for spare serial mouse)
Monitor: HDDB15 female
Computer Port Connectors:
Keyboard: 6 pin Mini DIN female
Mouse: 6 pin Mini DIN female (for PS/2 mouse)
DB9 male (for serial mouse)
Monitor: HDDB15 male
Dimensions:
Width: 9.5" (237 mm)
Height: 2.3" (58 mm)
Depth: 6.0" (153 mm)
Weight: 2.5 lbs (1.1 kg)
Operating Temp: 32 to 104 deg. F (0~40 deg. C)
Storage Temp: -4 to 140 deg. F (-20 ~ 60 deg. C)
Humidity: 0~80% RH, non-condensing
2
Product Detail
SLAVE INPUT
DB25 Daisy-chain port
MASTER INPUT
SLAVE OUTPUT
DB25 Daisy-chain port
DC power
jack
DIP switches
Optional serial
mouse
connector
CONSOLE
connectors
Keyboard
connector
PS/2 mouse
connector
VGA monitor
connector
PC PORT
connectors
Serial mouse
output
Keyboard
output
PS/2 mouse
output
VGA signal
output
FRONT PANEL
REAR PANEL
Current Active Port
LED Indicators
Current Active Bank
LED Indicators
Bank Select /
Scan Button
Port Select
Button
3
Make sure you have the right cables!
The OmniView™SE requires cables to connect the eight computers you will be
controlling. Below are the Belkin part numbers and their descriptions. We
recommend purchasing Cable Kits based on the type of mouse port your computer
uses. Cable kits have all the cables you need to connect one computer to the
OmniView™SE:
PS/2 Cable Kit - A3X982
Includes:
• 2 x F2N036-06
• 1 x F2N025-06-T
AT Cable Kit - A3X939
Includes:
• 1 x F3A510-06
• 1 x F2N025-06-T
• 1 x F2N209-06-T
• 1 x F2N017
(see below for descriptions of each)
Individual Cables and Adapters:
• PS/2 cable for keyboard and mouse ports
6 pin Mini DIN male/male
Part# F2N036-XX
• Standard VGA cable for monitor port
HDDB15 male/female with thumbscrews
Part# F2N025-XX-T
• Serial extension cable for serial mouse
DB9 male/female with thumbscrews
Part# F2N209-XX-T
• AT keyboard cable for AT-style keyboard port
5 pin DIN male/male
Part# F3A510-XX
• AT to PS/2 keyboard adapter
5 pin DIN female/6 pin Mini DIN male
Part# F2N017
Other Cables and Adapters:
• High-resolution/high-refresh rate VGA cable for monitor port
HDDB15 male/female with thumbscrews
Part# A3H981-XX
•
PS/2 to AT keyboard adapter - for use with a computer having an
AT-style keyboard port
6 pin Mini DIN female/ 5 pin DIN male
Part# F2N018
NOTE: The "-XX" in the part number represents the length in feet.
4
6 pin Mini DIN
5 pin
DIN Female
6 pin Mini
DIN Male
6 pin Mini
DIN Female
5 pin
DIN Male
HDDB15
Cabling Detail
5 pin DIN
HDDB15
DB9
Daisy-Chain Cable
• DB25 Male/Male,
2’ (.61m) with ferrite
Part # F1D108-CBL
Optional 19" (48.3cm) Rackmount Kit
• 19"(48.3cm), 1.5u high
Part # F1D103
1. Set the DIP switches. If you have only one OmniView
™
SE, use the MASTER bank
setting. If the OmniView™SE you are using will be daisy-chained off another unit,
use a unique slave setting. Please refer to the next section for more information
regarding multiple OmniView™SE units.
PLEASE FOLLOW THIS INSTALLATION PROCEDURE EXACTLY. NOT DOING SO MAY
RESULT IN KEYBOARD AND/OR MOUSE ERRORS, OR FAULTY OPERATION.
WARNING: Before attempting to connect anything to the OmniView™SE
or the computers, make sure everything is powered off. Plugging and
unplugging cables may cause irreversible damage to your computers and
the OmniView™SE. Belkin Components will not be held responsible for
damage caused.
Hardware Installation
3. Connect the monitor to the OmniView
™
SE. Using the attached cable, or the one
included with your monitor, connect it to the HDDB15 female port on the back of
the OmniView™SE labeled with the monitor symbol at the CONSOLE section.
2. Find a convenient place to put your OmniView
™
SE. Take note of the length of
your cables so that your computers, OmniView™SE, keyboard, mouse, and
monitor are distanced properly.
Monitor
NOTE: “ON” is down
Use this setting if
you have only one
OmniView™SE
DIP switche s 1 & 2 set the S CA N_TI ME. See the USAGE section regarding this setting
DIP SWITCH SETTINGS
12 3 4
ON ON ON ON BANK 0 MASTER
ON ON OFF ON BANK 1 Slave
ON ON ON OFF BANK 2 Slave
ON ON OFF OFF BANK 3 Slave
BANK ADDRESS
DIP Switches 1&2 set scantime. See page 15 for AutoScan Mode DIP Switch settings.
5
Loading...