BELKIN CARTE RÉSEAU SANS FIL N1 POUR ORDINATEUR DE BUREAU User Manual

F5D8001-uk

N1 Wireless Desktop Card

User Manual

Table of Contents

1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Benefits of a Home Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Advantages of a Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Placement of your Wireless Networking Hardware for

Optimal Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2 Overview

3 Installing and Setting up the Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 Using the Belkin Wireless Networking Utility . . . . . . . . . . . . . . . . . . . . . . . .

5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Applications and Advantages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Product Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Step 1: Install. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Step 2: Insert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Step 3: Finish. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Step 4: Configure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Accessing the Belkin Wireless Networking Utility

from the Windows System Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Network Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Available Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Network Status and Solution Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Setting Wireless Network Profiles

Securing your Wi-Fi Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Configuring your Card to use Security . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

11 13

30 37

1 1

5 6 6 7 7

Introduction

Thank you for purchasing the Belkin N1 Wireless Desktop Card. Now you can take advantage of this great new technology and gain the freedom to network your home and office computers wirelessly. This Card allows you to connect a desktop computer to your network. Please be sure to read through this User Manual completely, and pay special attention to the section entitled “Placement of your Wireless Networking Hardware for Optimal Performance”.

section

Benefits of a Home Network

Your Belkin Home Network will allow you to:

• Share one high-speed Internet connection with all the computers in your home

• Share resources, such as files, and hard drives among all the connected computers in your home

• Share a single printer with the entire family

• Share documents, music, video, and digital pictures

• Store, retrieve, and copy files from one computer to another

• Simultaneously play games online, check Internet email, and chat

Advantages of a Wireless Network Here are some of the advantages of setting up a Belkin wireless network:

• Mobility – you no longer need a dedicated “computer room”—

you can work on a networked laptop or desktop computer anywhere within your wireless range

• Easy installation – Belkin Easy Installation Wizards make setup

simple

• Flexibility – set up and access printers, computers, and other

networking devices from anywhere in your home

• Easy expansion – the wide range of Belkin networking products

lets you expand your network to include devices such as printers and gaming consoles

• No cabling required – you can spare the expense and hassle of

retrofitting Ethernet cabling throughout the home or office

• Widespread industry acceptance – choose from a wide range of

interoperable networking products

Introduction

Placement of your Wireless Networking Hardware for Optimal Performance

Your wireless connection will be stronger the closer your computer is to your wireless router (or access point). Typical indoor operating range for your wireless devices is between 100 and 200 feet. In the same way, your wireless connection and performance will degrade somewhat as the distance between your wireless router (or access point) and connected devices increases. This may or may not be noticeable to you. As you move farther from your wireless router (or access point), connection speed may decrease. Factors that can weaken signals simply by getting in the way of your network’s radio waves are metal appliances or obstructions, and walls.

If you have concerns about your network’s performance that might be related to range or obstruction factors, try moving the computer to a position between five and 10 feet from the wireless router (or access point) in order to see if distance is the problem. If difficulties persist even at close range, please contact Belkin Technical Support.

Note: While some of the items listed below can affect network

performance, they will not prohibit your wireless network from functioning; if you are concerned that your network is not operating at its maximum effectiveness, this checklist may help.

1. Placement of your Wireless Router (or Access Point)

Place your wireless router (or access point), the central connection point of your network, as close as possible to the center of your wireless network devices.

To achieve the best wireless network coverage for your “wireless clients,” (i.e. computers enabled by Belkin Wireless Notebook Cards, Wireless Desktop Cards, and Wireless USB Adapters):

• Ensure that your wireless router’s (or access point’s) antennas are parallel to each other, and are positioned vertically (toward the ceiling). If your wireless router (or access point) itself is positioned vertically, point the antennas as much as possible in an upward direction.

• In multistory homes, place the wireless router (or access point) on a floor that is as close to the center of the home as possible. This may mean placing the wireless router (or access point) on an upper floor.

• Try not to place the wireless router (or access point) near a cordless 2.4GHz phone.

Introduction

2. Avoid Obstacles and Interference

Avoid placing your wireless router (or access point) near devices that may emit radio “noise”, such as microwave ovens. Other objects that can inhibit wireless communication can include:

• Refrigerators

• Washers and/or dryers

• Metal cabinets

• Large aquariums

• Metallic-based, UV-tinted windows

section

If your wireless signal seems weak in some spots, make sure that objects such as these are not blocking the signal’s path between your computers and wireless router (or access point).

3. Cordless Phone Placement

If the performance of your wireless network is impaired after attending to the above issues, and you have a cordless phone:

• Try moving cordless phones away from the wireless router (or access point) and your wireless-enabled computers.

• Unplug and remove the battery from any cordless phone that operates on the 2.4GHz band (check manufacturer’s information). If this fixes the problem, your phone may be interfering.

• If your phone supports channel selection, change the channel on the phone to the farthest channel from your wireless network as possible. For example, change the phone to channel 1 and move your wireless router (or access point) to channel 11. (Your channel selection will vary depending on your region.) See your phone’s user manual for detailed instructions.

• If necessary, consider switching to a 900MHz or 5GHz cordless phone.

Introduction

4. Choose the “Quietest” Channel for your Wireless Network

In locations where homes or offices are close together, such as apartment buildings or office complexes, there may be wireless networks nearby that can conflict with yours. Use the Site Survey capabilities of your Belkin Wireless Networking Utility to locate any other wireless networks, and move your wireless router (or access point) and computers to a channel as far away from other networks as possible.

Experiment with more than one of the available channels in order to find the clearest connection and avoid interference from neighboring cordless phones or other wireless devices.

For more Belkin wireless networking products, use the detailed Site Survey and wireless channel information included in your User Manual.

5. Secure Connections, VPNs, and AOL

Secure connections typically require a user name and password, and are used where security is important. Secure connections include:

• Virtual Private Network (VPN) connections, often used to connect remotely to an office network

• The “Bring Your Own Access” program from America Online (AOL), which lets you use AOL through broadband provided by another cable or DSL service

• Most online banking websites

• Many commercial websites that require a user name and password to access your account

Secure connections can be interrupted by a computer’s power management setting, which causes it to “go to sleep.” The simplest solution to avoid this is to simply reconnect by re-running the VPN or AOL software, or by re-logging into the secure website.

A second alternative is to change your computer’s power management settings so it does not go to sleep; however, this may not be appropriate for portable computers. To change your power management setting in Windows, see the “Power Options” item in the Control Panel.

If you continue to have difficulty with Secure Connections, VPNs, and AOL, please review steps 1–4 in the previous pages to be sure you have addressed these issues.

These guidelines should allow you to cover the maximum possible area with your wireless router. Should you need to cover an even wider area, we suggest the Belkin Wireless Range Extender/Access Point.

For more information regarding our networking products, visit our website at www.belkin.com/networking or call Belkin Technical Support.

Overview

Product Features

The Card complies with the IEEE draft-802.11n specification to communicate with other draft-802.11n-compliant wireless devices at speeds of up to 300Mbps*. The Card is also compatible with 802.11g devices at 54Mbps as well as 802.11b products at 11Mbps. The Card operates on the same 2.4GHz frequency band as 802.11b/g Wi-Fi products.

• 2.4GHz ISM (Industrial, Science, and Medical) band operation

• Integrated easy-to-use Belkin Wireless Networking Utility

• PCI interface, for operation in virtually any desktop computer

• WPA, WPA2, 64-bit WEP (Wired Equivalent Privacy), or 128-bit encryption

• Wireless access to networked resources

• Data rate of up to 300Mbps* (draft 802.11n), 54Mbps (802.11g), or 11Mbps (802.11b)

• Easy installation and use

• LED power and activity indicators

section

Overview

Applications and Advantages

• Connection rates of up to 300Mbps* Provides immediate high-speed wireless connectivity at home, work, and hotspot locations without compromising the use of existing 802.11b/g products

• Compatibility with 802.11b/g products The Card is backward-compatible with existing Wi-Fi (IEEE

802.11b/g) products

• Difficult-to-wire environments Enables networking in buildings with solid or finished walls, or open areas where wiring is difficult to install

• Frequently changing environments Adapts easily in offices or environments that frequently rearrange or change locations

• SOHO (Small Office/Home Office) networking needs the easy and quick, small network installation SOHO users need

Product Specifications

Host Interface: 32-bit PCI Power Consumption:

802.11b: TX 920mA @ 3.3V, RX 400mA @ 3.3V

802.11g: TX 1000mA @ 3.3V, RX 400mA @ 3.3V

802.11n: 20MHz operation, TX 1000mA @ 3.3V, RX 400mA @ 3.3V 40MHz operation, TX 1070mA @ 3.3V, RX 500mA @ 3.3V Operating Temperature: 32—131 degrees F (0—55 degrees C) Storage Temperature: -4—176 degrees F (-20—80 degrees C)

Humidity: Max. 90% (non-condensing) Typical Operating Range: Up to 1,400 ft. (426.7m)** *

NOT E: T he s tandard tra ns mission rat e– 300Mbps –is the physical data rate. Act ual data thr oughput wil l be lowe r.

**Wirel es s pe rforman ce m ay v ary depending on the netwo rking envir on ment.

Provides

section

Overview

(a) Power/Activity LED

Lights up when the Card is powered on; flashes when wireless activity is detected

(b) Card Connector

Part of the Card that fits into your computer’s PCI slot

Lets you connect to the cable from the external antenna

System Requirements

• PC-compatible desktop computer containing: one available 32-bit PCI slot

• 128MB RAM or greater

• 500MHz processor or greater

• Windows

2000 or XP

Package Contents

• N1 Wireless Desktop Card

• External Antenna with Cable

• Quick Installation Guide

• Installation Software CD

• User Manual

(b)

(a)

(c)

Installing and Setting up the Card

Step 1 Install

IMPORTANT

: Install the software before inserting the Card.

1.1 Insert the Installation Software CD into your CD-ROM drive.

1.2 1.2 The Belkin Wireless Card Installer screen will automatically

appear. (This may take 15–20 seconds.) Click “Install Software” or “Next” to start the installation.

Note: If the Belkin Wireless Card Installer screen does not appear within

20 seconds, access your CD-ROM by double-clicking on the “My Computer” icon; then double-click on the CD-ROM drive into which the installation CD has been placed. Double-click on the icon named “Setup.exe”.

1.3 The InstallShield Wizard will now

start. Click “Next” to continue.

Installing and Setting up the Card

1.4 Choose a destination folder in which

to install the software, or simply click “Next”.

1.5 The first in a series of progress-

monitoring screens will let you know where you are in the setup process.

1.6 You might see a screen similar to

this one. This DOES NOT mean there is a problem. Our software has been fully tested and is compatible with this operating system. Select “Continue Anyway” and follow the on-screen instructions.

section

Installing and Setting up the Card

1110

Step 2 Insert

Insert the Card into your Computer

2.1 Shut down your computer and disconnect your computer’s power

cord.

2.2 Remove the screws behind your computer case that secure the

computer cover and remove the cover.

2.3 Touch any metal part of the case to discharge static electricity,

to avoid damage to your product or the computer.

2.4 Locate an empty PCI expansion

slot (usually white in color). Confirm that the Card will fit into the slot you have chosen.

2.5 Remove the metal PCI bracket

from the back of the computer that corresponds to the PCI slot you selected. If there is a screw, place it in a safe place, as you will be using it to attach the Card to the computer later.

2.6 Push the Card firmly into the PCI

slot that you have chosen

Installing and Setting up the Card

2.7 Now secure the Card with the screw that you previously placed in

a safe place.

2.8 Replace the computer’s cover. Plug in the external antenna cable

to the connector on the back of the Card.

2.9 Now that the Card is installed, you can reconnect the power cord

and turn the computer back on.

Step 3 Finish

Finish Installation of the Card

3.1

The Found New Hardware Wizard will appear. (This may take 3–15 seconds.) Select “Yes, this time only” and click “Next” to install the hardware.

3.2 Select “Install the software

automatically” and “Next” to install the hardware.

section

Installing and Setting up the Card

1312

3.3 The Wizard will now install your

software.

3.4 You might see a screen similar

to this one. This DOES NOT mean there is a problem. Our software has been fully tested and is compatible with this operating system. Select “Continue Anyway” and follow the on-screen instructions.

3.5 The installation is now complete.

Click “Finish” to exit.

Installing and Setting up the Card

Step 4 Configure

Use the Belkin Wireless Networking Utility

4.1

After restarting your computer, double-click the Belkin Wireless Networking Utility icon on the desktop screen.

4.2 The Belkin Wireless Networking

Utility screen will appear.

4.3 Select a network to connect to from

the “Available Networks” list and click “Connect”.

In order to see your available

Note:

networks, you must be near a working wireless router or access point.

section

4.4 The Belkin Wireless Networking

Utility icon can also be found on the system tray

Note:

Wireless Networking Utility icon on the system tray will bring up the “Utility” screen.

Installation is now complete.

Double-clicking on the Belkin

Using the Belkin Wireless Networking Utility

1514

After successfully installing the Belkin Wireless Networking Utility (WNU), configurations for wireless connection and security are just a few easy clicks away.

Accessing the Belkin Wireless Networking Utility from the Windows System Tray

To access the WNU, simply place your mouse pointer and right-click over the WNU icon on the Windows task tray.

If the icon is not present, click on “Start > Programs > Belkin > Belkin Wireless Utility”.

Using the Belkin Wireless Networking Utility

The WNU’s default screen is the “Current Status” tab. The “Current Status” tab displays the current Network Status and Available Networks.

Network Status

This window displays the connectivity status of the current network. It even displays connectivity between the computer and router, and router and Internet. In the event of a connectivity problem, this window can be used to determine the problem’s source (e.g. computer, router, or Internet/modem).

Available Networks

This window displays the available networks at the current location as well as their SSID, Signal Strength, Security Type, Channel, and Network Type.

section

Lost Wireless Connection

If the current wireless connection is lost, a window will pop up and the WNU will attempt to reconnect.

Using the Belkin Wireless Networking Utility

1716

Connection Failure

Other options will appear during attempts to reconnect. To stop connecting, click “Stop” and to reattempt connection, click “Retry”.

Network Status and Solution Tips

To further understand the current Network Status, click “Open Wireless Utility”. The default screen will be the “Current Status” tab and the “Network Status” section determines which connections are good and/or faulty.

The WNU also features a “Solution Tips” section that provides troubleshooting guidelines.

Using the Belkin Wireless Networking Utility

Setting Wireless Network Profiles

The “My Connections” tab on the WNU allows you to add, edit, and delete connection profiles. It also displays signal strength, security, and network type.

Securing your Wi-Fi® Network

If you choose to connect to a secure network, determine the type of security (WPA or WEP*) and use the appropriate field in the dialog box.

section

*Note: Types of security

Using the Belkin Wireless Networking Utility

1918

Note: When you select a network using encryption, you will first see

the simple security screen. Click the “Advanced” button to see other security options (below).

Using the Belkin Wireless Networking Utility

Wired Equivalent Privacy (WEP) is a less secure, but more widely

adopted wireless security protocol. Depending on the security level (64or 128-bit), the user will be asked to input a 10- or 26-character hex key. A hex key is a combination of letters, a–f, and numbers, 0–9.

Wireless Protected Access (WPA) is the new standard in the

wireless security. However, not all wireless cards and adapters support this technology. Please check your wireless adapter’s user manual to check if it supports WPA. Instead of a hex key, WPA uses only passphrases, which are much easier to remember.

The following section, intended for the home, home-office, and smalloffice user, presents a few different ways to maximize the security of your wireless network.

At the time of publication, four encryption methods are available:

Encryption Methods:

Nam e 64- bit Wired

Acr onym 64-b it W EP 128 -bit WEP WPA -TKIP/A ES

Sec urity Goo d Bet ter Bes t Bes t

Fea tures Static keys Sta tic keys Dyn amic key

Equ ivalent Pri va cy

Enc ryption key s bas ed o n RC 4 alg orithm (typi ca lly 40- bit keys)

128 -Bit Wired Equ ivalent Pri vacy

Mor e se cure tha n 64 -bit WEP usi ng a key len gth of 104 bit s pl us 24 addit ional bit s of sys temgen erated data

Wi- Fi P rotecte d Acc ess-TKI P

(or jus t WP A)

enc ryption and mut ual aut hentica ti on

TKI P (T emporal Key Int egrity Pro tocol) added so that keys are rot ated and enc ryption is str engthen ed

Wi- Fi Prot ec ted Acc ess 2

WPA 2-AES (or jus t WP A2)

Dyn amic key enc ryption and mut ual aut hentica ti on

AES (Ad vanced Enc ryption Sta ndard) does not cau se a ny thr oughput los s

section

Using the Belkin Wireless Networking Utility

2120

WEP

WEP is a common protocol that adds security to all Wi-Fi-compliant wireless products. WEP gives wireless networks the equivalent level of privacy protection as a comparable wired network.

64-Bit WEP

64-bit WEP was first introduced with 64-bit encryption, which includes a key length of 40 bits plus 24 additional bits of system-generated data (64 bits total). Some hardware manufacturers refer to 64-bit as 40-bit encryption. Shortly after the technology was introduced, researchers found that 64-bit encryption was too easy to decode.

128-Bit Encryption

As a result of 64-bit WEP’s potential security weaknesses, a more secure method of 128-bit encryption was developed. 128bit encryption includes a key length of 104 bits plus 24 additional bits of system-generated data (128 bits total). Some hardware manufacturers refer to 128-bit as 104-bit encryption. Most of the new wireless equipment in the market today supports both 64bit WEP and 128-bit WEP encryption, but you might have older equipment that only supports 64-bit WEP. All Belkin wireless products will support both 64-bit WEP and 128-bit encryption.

Encryption Keys

After selecting either the 64-bit WEP or 128-bit encryption mode, it is critical that you generate an encryption key. If the encryption key is not consistent throughout the entire wireless network, your wireless networking devices will be unable to communicate with one another. You can enter your key by typing in the hex key. A hex (hexadecimal) key is a combination of numbers and letters from A–F and 0–9. For 64bit WEP, you need to enter 10 hex keys. For 128-bit WEP, you need to enter 26 hex keys.

For instance:

0F 4B C3 D4 = 64-bit WEP key

03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key

Write down the hex WEP key from your wireless router (or access point) and enter it manually into the hex WEP key table in your Card’s configuration screen.

Using the Belkin Wireless Networking Utility

WPA

WPA is a new Wi-Fi standard that improves upon the security features of WEP. To use WPA security, the drivers and software of your wireless equipment must be upgraded to support it. These updates will be found on your wireless vendor’s website. There are three types of WPA security: WPA-PSK (no server),WPA (with radius server), and WPA2.

WPA-PSK (no server) uses what is known as a pre-shared key as the network key. A network key is a password that is between eight and 63 characters long. It can be a combination of letters, numbers, or characters. Each client uses the same network key to access the network. Typically, this is the mode that will be used in a home environment.

WPA (with radius server) works best in a business environment, in which a radius server automatically distributes the network key to clients.

WPA2 requires Advanced Encryption Standard (AES) for encryption of data, which offers much greater security than WPA. WPA uses both Temporal Key Integrity Protocol (TKIP) and AES for encryption.

Setting up your Belkin Wireless Router (or Access Point) to use Security

To start using security, you need to first enable WEP or WPA for your wireless router (or access point). For Belkin Wireless Routers (or Access Points), these security features can be configured by using the web-based interface. See your wireless router’s (or access point’s) manual for directions on how to access the management interface.

IMPORTANT: You must now set all wireless network cards/adapters to match these settings.

section

Using the Belkin Wireless Networking Utility

2322

Configuring your Card to use Security

At this point, you should already have your wireless router (or access point) set to use WPA or WEP. In order for you to gain wireless connection, you will need to set your N1 Wireless Desktop Card to use the same security settings.

Changing the Wireless Security Settings

The Belkin N1 Wireless Desktop Card supports the latest WPA security feature as well as the legacy WEP security standard. By default, wireless security is disabled.

To enable security, you will first need to determine which standard is used by the router (or access point). (See your wireless router’s or access point’s manual for directions on how to access the security settings.)

To access the security settings on your Card, click the “My Connections” tab and point to the connection for which you want to change security settings. Click “Edit” to change settings.

Using the Belkin Wireless Networking Utility

WEP Setup

64-Bit WEP Encryption

1. Select “WEP” from the “Data Encryption” drop-down menu.

2. After selecting your WEP encryption mode, you can enter your key

by typing in the hex key manually. A hex (hexadecimal) key is a combination of numbers and letters

from A–F and 0–9. For 64-bit WEP, you need to enter 10 hex keys.

For instance:

0F 4B C3 D4 = 64-bit WEP key

section

Using the Belkin Wireless Networking Utility

2524

3. Click “Save” to finish. Encryption in the wireless router (or access

point) is now set. Each of your computers on your wireless network will now need to be configured with the same security settings.

WARNING: If you are using a wireless client to turn on the security

settings in your wireless router (or access point), you will temporarily lose your wireless connection until you activate security on your wireless client. Please record the key prior to applying changes in the wireless router (or access point). If you don’t remember the hex key, your client will be locked out of the wireless router (or access point).

128-Bit WEP Encryption

Select “WEP” from the drop-down menu.

2. After selecting your WEP encryption mode, you can enter your

key by typing in the hex key manually. A hex (hexadecimal) key is a combination of numbers and letters from A–F and 0–9. For 128-bit WEP, you need to enter 26 hex keys

For instance:

03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key

Using the Belkin Wireless Networking Utility

section

3. Click “Save” to finish. Encryption in the wireless router (or access point)

is now set. Each of the computers on your wireless network will now need to be configured with the same security settings.

WARNING: If you are using a wireless client to turn on the security

Using the Belkin Wireless Networking Utility

2726

WPA-PSK (no server)

Choose this setting if your network does not use a radius server. WPA-PSK (no server) is typically used in home and small office networking.

1. From the “Network Authentication” drop-down menu, select

“WPA-PSK (no server)”.

2. Enter your network key. This can be from eight to 63 characters

and can be letters, numbers, or symbols. This same key must be used on all of the clients (network cards) that you want to include in your wireless network.

Using the Belkin Wireless Networking Utility

3. Click “Save” to finish. You must now set all clients (network

cards) to match these settings.

Wireless Networking Utility Options

The “Options” tab on the WNU provides the user the ability to customize his or her WNU settings

section

Using the Belkin Wireless Networking Utility

2928

Wireless Networking Utility Help

The WNU “Help” tab provides users with access to online and telephone support, a one-click check for software updates, and advanced diagnostic tools.

+ 222 hidden pages