Belkin AP41300f User Manual

CLEAR PICTURE CLEAR PICTURE CLEAR PICTURE

Home Theater Power Protection with PureFilter™ Technology

Protection d’alimentation pour cinéma maison doté

de la technologie PureFilter

Power Console PF60

Console d’alimentation PF60

User Manual

Manuel d’utilisation

CLEAN SOUND CLEAN SOUND CLEAN SOUND

AP41300fc10-BLK

Table of Contents

Belkin PureAV Power Console

Page

Introduction ......................................................................................... 2

Safety Precautions ............................................................................ 3

Package Contents .............................................................................. 4

Power Console Features .................................................................... 5

Hookup and Installation

Step 1 Mounting your Power

(optional) Console ................................................................ 7

Step 2 Program the Outlet Banks .............................. 8

Step 3 Connect Digital Components to Digital Filter 1 and Digital Filter 2

(Bank 01 and Bank 02) ................................... 10

Step 4 Connect Video Components to

the Video Filter (Bank 03) .............................. 11

Step 5 Connect Audio Components to Audio Filter 1 and Audio Filter 2

(Bank 04 and Bank 05) .................................. 12

Step 6 Connect High-Current Audio Filter

(Bank 06) .......................................................... 13

Step 7 Connect your Coaxial-Cable/DSS Lines ...... 14

Operation .....................................................................................

Troubleshooting ........................................................................... 17

Glossary of Power Terms ........................................................... 19

Belkin Connected Equipment Warranty ...................................

1 5

Introduction

Thank you for purchasing the Belkin PureAV Power Console PF60. The Power Console is designed to clean, protect, and efficiently distribute power to your valuable home theater system. Belkin PureAV ensures that every movie you watch and every album you hear is as clean and clear as possible.

The Power Console is packed with innovative features to provide you with the best home theater experience. Ordinary household AC power that is delivered to your home is polluted with “noise” from many sources within your home, including digital components and household appliances. The Power Console’s advanced Phase 5 PureFilter Circuitry is optimized to remove electrical noise and provide clean and clear power to all of your valuable digital audio and video equipment. The multiphase PureFilter Circuitry also provides true isolation between audio, video, and digital components. This isolation prevents noise created by components that are already connected to the Power Console from contaminating other connected equipment. In addition, the Power Console contains Advanced Overvoltage Protection, which automatically disconnects power from your equipment when the input voltage reaches a dangerous level, and restores power automatically when the voltage returns to a safe level.

We also realize that the aesthetics of your system are very important. For this reason, we enlisted some of the top industrial designers in the country to design the housing for the Belkin PureAV Power Console. The minimalist styling of the Power Console combines function with a simplistic yet elegant design and is a great complement to any system. The integrated multifunction LCD combines all essential controls with a versatile voltage and current monitor.

Belkin PureAV Power Console

As you may know, your AC power source is not the only threat to the safety of your equipment. This is why the Belkin PureAV Power Console has three sets of coaxial connections to protect your coaxial-cable lines.

Providing the ultimate home theater experience is the driving force behind the Belkin PureAV design, providing the clearest picture and cleanest sound from your components to you. Thank you again for purchasing the Belkin PureAV Power Console PF60.

Clear Picture – Clean Sound. BELKIN PureAV.

Safety Precautions

WARNING – Grounding and Polarization

This product must be plugged directly into a grounded AC power outlet (3-

Belkin PureAV Power Console

prong). Do not use a 3-to-2-prong adapter to defeat the grounding pin. Do not plug or “daisy-chain” this product into other electrical products such as surge protectors, power strips, or UPSes. Do not plug this product into an extension cord. Failure to plug this product directly into a grounded outlet may result in personal injury or damage to your equipment. Call a licensed electrician if you are unsure if your AC outlets are properly grounded.

WARNING – Rooftop Antennas and Satellite Dishes

If you use rooftop antennas, satellite dishes, or any other rooftop hardware that connects to your Belkin PureAV Power Console, make sure that all the wires leading from these components are properly grounded. This will protect against voltage surges from lightning strikes or static charges.

WARNING – Lightning Storm Protection

Although your Belkin PureAV Power Console is built to withstand large power surges, we cannot guarantee that it will protect all of your equipment in the event of a large lightning storm. In the event of a lightning storm, it is best to unplug your Power Console from the wall. Once you have done this, there is no need to unplug any of the equipment that is connected to the Power Console.

WARNING – Water and other Liquids: Shock Hazard

Do not use this product with aquariums or other water-related products. Use indoors and in dry locations only. Do not operate the Power Console if any liquid is spilled on or in the unit. Failure to follow these guidelines could result in serious bodily injury or death.

WARNING – Cleaning

Always unplug the Power Console before cleaning. It is only necessary to clean the Power Console with a clean, dry cloth or duster. Do not use any cleaning solutions, sprays, or water.

WARNING – No User-Serviceable Parts Inside

If for any reason your Power Console is malfunctioning, do not attempt to repair or dismantle the unit in any way. Unplug the unit and consult this User Manual for warranty and service contact information.

WARNING – Power Cord Safety

Do not route the Power Console’s AC power cord near heat sources. This could damage the power cord and cause it to malfunction, creating a shock hazard.

Do not route the Power Console’s AC power cord in heavy foot-traffic areas where it could create a trip hazard (hallways, doorways, across room).

If the power cord is frayed, ripped, cut, or damaged in any way, please discontinue use immediately and refer to the warranty section of this Manual for instructions.

Package Contents

• User Manual

• Belkin PureAV Power Console PF60 Home Theater Power Protection

with PureFilter Technology

• One sheet of Belkin PureAV cable labels

• One pair of rack-mount brackets and bag of assembly screws

Belkin PureAV Power Console

Power Console Features

1. Switched button – turns the power on and off to the Power Console’s

Belkin PureAV Power Console

“switched” outlets

2. Auxiliary outlet – offers optimal connection for digital components and is ideal for temporary connection of equipment such as video/ digital cameras, game consoles, or any device you wish to power

3. Central LCD Control – controls and monitors the Power Console’s vital functions

4. Digital Filter 1 – ensures optimum reduction of line noise and interference to your digital components

5. Digital Filter 2 – ensures optimum reduction of line noise and interference to your digital components

6. Video Filter – ensures optimum reduction of line noise and interference to your video components

7. Audio Filter 1 – ensures optimum reduction of line noise and interference to your audio components

8. Audio Filter 2 – ensures optimum reduction of line noise and interference to your audio components

9. HiCurrent™ Filter – delivers high current to power-hungry amplifiers and receivers; optimized to filter out line noise to these components

10. Programmable bank switches – allows you to program each bank of outlets

1 2

Power Console Features

11. Coaxial-Cable Line Input/Output – protects coaxial cable lines from

dangerous electrical disturbances that can travel down your coaxial cable lines

12. 15-Amp Circuit Breaker – offers safety of resettable circuit breaker

13. Ground – provides a grounding point for ungrounded components

987654 13

Belkin PureAV Power Console

Hookup and Installation

Step 1 (optional) Mounting your Power Console

Belkin PureAV Power Console

The Belkin PureAV Power Console can be mounted to a standard AV equipment rack or inside a cabinet equipped with an equipment rack.

1. Remove the brackets and mounting screws from the box.

2. Make sure that the Power Console is unplugged.

3. Align the bracket with the front of the Power Console for flush

installation in the rack.

4. Attach the bracket to the side of the Power Console with the screws provided (Fig. 1a). You must use a minimum of four screws to mount each bracket.

5. Repeat steps 3 and 4 for installation of the bracket to the other side of the Power Console.

6. Mount the Power Console to the equipment rack. Screws for mounting the Power Console to the equipment rack are not provided as they are made specifically for the particular equipment rack that you own. Contact the manufacturer of the rack if you do not have the correct mounting screws.

Figure 1

Hookup and Installation

Step 2 Program the Outlet Banks

Each outlet bank on the rear panel of the Power Console is programmable. Using the slide switches on the rear panel, you can program the outlets for switched or unswitched, and for delay or always-on (no delay) (Fig. 2). You can also determine the length of the delay (5, 10, or 15 seconds).

A. Outlet Banks Always-On (unswitched): For components that need

to retain memory or other settings (DVRs, satellite receivers, VCRs), set the top slide switch to “Always ON” (Fig. 2). These outlet banks will always supply power when the Power Console is plugged into the wall.

B. Outlet Banks Switched On (no delay): Set the top slide switch to

“Switched”. Make sure that the lower slide switch is set to “No Delay” (Fig. 2). The outlet banks will be immediately powered-on when the Power Console is switched-on by pressing the “Switched” button on the front of the unit. Switched outlets can also be switched-on by external remote signal (see page xx). These outlets will remain powered-on for a short period of time after switching them off depending on the “Delay Time” setting (see “Delay Time Switch” below).

C. Outlet Banks Switched On After Delay: You may find it necessary to

program your outlets to switch on after a delay. Once the delay is set, the outlets will be powered-on after the outlets that are set for “no delay” have powered-on. They will then power-off in reverse sequence: “delay” outlets will power-off first and “no delay” outlets will power-off last. This is useful to avoid the loud and occasionally damaging “thump” created when the amplifier voltage is stabilizing.

Belkin PureAV Power Console

a. Set the top slide switch to “Switched” and the bottom slide switch to

“Delay” (Fig. 2).

b. Repeat this for each bank that you want to be switched on after a

delay.

c. Press the “Switched” button on the front of the Power Console to

activate all of the switched outlets

Note: The delay can only be set on “Switched” outlets.

D. Delay Time Switch: This switch sets the length of delay for all outlet

banks that are programmed as “Switched” and “Delay”. Set the delay time by selecting 5, 10, or 15 seconds (Fig. 2). 15 seconds is the recommended delay time for tube amplifiers.

Hookup and Installation

E. Trigger Out: The trigger out function gives you the ability to control an

Belkin PureAV Power Console

external device equipped with a remote trigger such as a retractable movie screen when the Power Console is switched on. The 12-volt DC OUT port accepts a 1/8” mini plug cable. Set the “Trigger Out” switch to “Delayed” and the Trigger Out will power an external device after a delay set by the Delay Time Switch. If you do not want a delay then set the “Trigger Out” switch to “Switched” (Fig. 2).

Figure 2

Figure 2a

Figure 2b

Figure 2c

Figure 2d

Figure 2e

Hookup and Installation

Step 3 Connect Digital Components to Digital Filter 1 and Digital Filter 2 (Bank 01 and Bank 02)

The Belkin PureAV Power Console PF60 contains two isolated digital filters that are optimized to clean and condition the power to all of your digital components. The digital filters also filter out noise created by digital components such as DVD players and isolate your digital components from connected video, audio, and high-current audio components.

A. Attach Belkin PureAV power cord labels to each component’s power

cord before you plug the cord into the corresponding outlet on the Power Console.

B. Cable/Satellite – Connect your cable or satellite receiver power cord to

the outlet labeled “Cable/SAT”.

C. HDTV – Connect your HDTV power cord to the outlet labeled “HDTV”.

D. Digital Video Recorder – Connect your digital video recorder power

cord to the outlet labeled “DVR”.

E. DVD – Connect your DVD power cord to the outlet labeled “DVD”.

Note: You can connect any type of digital component into any of the digital

filter outlets. You are not limited to the components listed above.

Belkin PureAV Power Console

Hookup and Installation

Step 4 Connect Video Components to the Video Filter (Bank 03)

Belkin PureAV Power Console

The Belkin PureAV Power Console PF60 contains an isolated video filter that is optimized to clean and condition the power to all of your video components. The video filter also isolates your video components from connected digital, audio, and high-current audio components.

A. Attach Belkin PureAV power cord labels to each component’s power

cord before you plug the cord into the corresponding outlet on the Power Console.

B. TV – Connect your TV or monitor power cord to the outlet labeled “TV/

Monitor”.

C. VCR – Connect your VCR power cord to the outlet labeled “VCR”.

Note: You can connect any type of analog video component into any

of the video filter outlets. You are not limited to the components listed above.

Hookup and Installation

Step 5 Connect Audio Components to Audio Filter 1 and Audio Filter 2 (Bank 04 and Bank 05)

The Belkin PureAV Power Console PF60 contains two isolated audio filters that are optimized to clean and condition the power to all of your audio components. The audio filters also isolate your audio components from connected digital, video, and high-current audio components.

A. Attach Belkin PureAV power cord labels to each component’s power

cord before you plug the cord into the corresponding outlet on the Power Console.

B. CD – Connect your CD player power cord to the outlet labeled “CD”.

C. Tape – Connect your tape player power cord to the outlet labeled

“Tape”.

D. Auxiliary – This outlet can be used to connect any other audio

equipment you may have.

E. Receiver (Preamp) – Connect your receiver or preamp power cord to

the outlet labeled “Receiver”.

Belkin PureAV Power Console

Note: You can connect any type of audio component into any of the audio

filter outlets. You are not limited to the components listed above.

Hookup and Installation

Step 6 Connect High-Current Audio Filter (Bank 06)

Belkin PureAV Power Console

This outlet is specifically designed to filter out AC line noise while delivering maximum current to power-hungry amplifiers and other highcurrent audio components.

A. Attach Belkin PureAV power cord labels to each component’s power

cord before you plug the cord into the corresponding outlet on the Power Console.

B. AMP 1 – Connect your main amplifier power cord to the outlet labeled

“AMP 1”.

C. AMP 2 – Connect your secondary amplifier power cord to the outlet

labeled “AMP 2”.

Note: You can connect any type of high-current audio component

into any of the high-current outlets. You are not limited to the components listed above..

Hookup and Installation

Step 7 Connect your Coaxial-Cables/DSS Lines

Your Belkin PureAV Power Console comes with three pairs of coaxial-cable connections to protect your system from dangerous electrical disturbances that can travel down your coaxial-cables lines. You will need additional coaxial cables to connect the Power Console to your home theater components.

1. Cable TV – Connect the incoming cable television coaxial-cable line to

the connector labeled “Cable IN”. Connect one end of a second coaxial cable to the connector labeled “Cable OUT”. Connect the other end of this cable to your cable TV tuner.

2. Satellite (DSS) TV – Connect the incoming satellite television coaxial-

cable line to the connector labeled “SAT IN”. Connect one end of a second coaxial cable to the connector labeled “SAT OUT”. Connect the other end of this cable to your satellite TV tuner.

3. Antenna – Connect the incoming TV or radio antenna cable line to the

connector labeled “Antenna IN”. Connect one end of a second coaxial cable to the connector labeled “Antenna OUT”. Connect the other end of this cable to your TV or radio equipment.

Belkin PureAV Power Console

Note: We have included labels for the Coax IN and Coax OUT lines if

*IMPORTANT WARNING – To sufficiently safeguard all of your equipment from damage resulting from a power surge, all of your incoming coaxial-cable lines should be properly grounded. Contact a licensed electrician to verify that all of your cable lines are properly grounded to a cold water pipe or ground rod.

needed for better organization.

+ 32 hidden pages