Belkin AP30800-10 User Manual

Home Theater Battery Backup with AVR Technology

User Manual

Clear Picture

Clean Sound

AP30800-10

PureAV Battery Backup

1

Table of Contents

Page

Introduction ......................................................................................... 2

Package Contents ............................................................................... 2

PureAV Battery Backup Features and Functions ........................3

Alarms .................................................................................................. 4

Product Features .......................................................................... 5

Installation ................................................................................ 6 -7

Troubleshooting ............................................................................. 8

Technical Specifications .............................................................. 9

Storage ........................................................................................... 9

Belkin Connected Equipment Warranty ................................ 10-12

Information ................................................................................... 13

Introduction

Congratulations and thank you for purchasing the PureAV Home Theater
Battery Backup with AVR Technology (the PureAV Battery Backup).
Frequent electrical disturbances, both natural and man-made, degrade
the quality of power supplied to your home theater system. Brownouts
or blackouts can cause you to lose your complex settings, and ultimately
damage your valuable equipment along with the overall quality of your
home theater experience. In addition to providing battery power in case
of a blackout, our PureAV Battery Backup provides outstanding surge
protection and power conditioning while ensuring that you experience the
clearest picture and cleanest sound directly from the source.

Please save this manual!

It contains important operating instructions and warranty information
pertaining to your PureAV Battery Backup.

Please save or recycle the packaging materials

The PureAV Battery Backup packaging was designed with great care to
provide protection during shipment and delivery. Please keep the packaging
materials in the unlikely event that you must return this product for service.
Damage sustained during transit is not covered under the warranty.

Package Contents

You should have received the following:

• 1 PureAV Battery Backup unit

• 2 rackmount Brackets

• 1 Network Line Cable

• 1 Phone Line Cable

• 1 Coaxial Cable

PureAV Battery Backup

2

PureAV Battery Backup

3

PureAV Battery Backup Features and Functions

Indicator Condition Meaning

BATTERY ON

(Green LED)

Solid

Green

The PureAV Battery Backup is on battery
back-up mode and an Intermittent audible
alarm is on. The Battery Backup will begin
shutdown procedure.

Flashing

Green

Battery is low. The PureAV Battery Backup
will start shutdown. The buzzer sounds an
audible alarm.

OVERLOAD

(Yellow LED)

Solid

Yellow

The PureAV Battery Backup shutdown due to an
overload or short-circuit condition.

Flashing

Yellow

Battery output is drawing more power than the
Battery Backup can provide.

REPLACE
BATTERY
(Red LED)

Solid

Red

Battery is weak or bad; the battery needs
to be replaced.

SITE WIRING

FAULT

(Red LED)

Solid

Red

There is either no ground circuit or a
reversed polarity in the building wiring.

LOAD

(Yellow LED) Solid

Yellow

This display shows the PureAV Battery Backup
output load percentage level of 17%, 33%,
50%, 67%, and 85%.

BATTERY

(Green LED) Solid

Green

This display shows the battery capacity
percentage level of 20%, 40%, 60%, 80%, and
100%.

On/Off/Test Switch

LEDs Indicator

Site Wiring Fault
Battery On

Battery
Load

Replace Battery
Overload

Alarms

Battery Backup (Slow Alarm)

When the PureAV Battery Backup is in battery-backup mode, the “Battery
On” LED (green) illuminates and the PureAV Battery Backup sounds an
audible alarm. The alarm stops when the PureAV Battery Backup returns
to normal online operation.

Low Battery (Rapid Alarm)

When the PureAV Battery Backup is in battery-backup mode and the
battery’s energy begins to run low, the PureAV Battery Backup will beep
rapidly until it shuts down from a depleted battery or returns to online
normal operation.

Overload (Continuous alarm)

When the PureAV Battery Backup is overloaded (the connected loads
exceed the maximum rated capacity), the PureAV Battery Backup
emits a continuous alarm to warn of an overload condition. Disconnect
nonessential equipment from the PureAV Battery Backup to eliminate
the overload.

PureAV Battery Backup

4