BELKIN ADAPTATEUR USB BLUETOOTH-10 MÈTRES, ADAPTATEUR USB BLUETOOTH-100 MÈTRES User Manual

Bluetooth

F8T012 - F8T013

Connect your peripherals and computing devices, without cables

User Manual

™

USB Adapter

F8T012 - F8T013

Bluetooth

F8T012 - F8T013

Connect your peripherals and computing devices, without cables

User Manual

™

USB Adapter

F8T012 - F8T013

Table of Contents

Introduction ......................................................................................................... 4

Product Features .................................................................................................. 5

System Requirements ........................................................................................... 6

Package Contents ................................................................................................ 7

USB Adapter Specifications .................................................................................. 8

Software Setup .................................................................................................... 9

Hardware Setup ................................................................................................. 16

Initial Configuration Wizard ................................................................................. 19

Uninstalling the Software .................................................................................... 22

How to use the Belkin Bluetooth software ............................................................ 26

UK-5

Introduction

Thank you for purchasing the Bluetooth USB Adapter (the USB Adapter) from Belkin. The USB Adapter features breakthrough Bluetooth wireless technology that lets you create efficient communications between your USB desktop PC or notebook and devices using Bluetooth wireless technology—without physical connectors or cables.

Before you install and start using your new Bluetooth USB Adapter, please take a few minutes to review some of the terms that you will be seeing throughout the document.

UK-4

Product Features

UK-5

• Bluetooth allows you to create an adhoc network

• Higher speed access up to 3Mbps (effective throughput of 2.2 Mbps)

• Adds Bluetooth 2.0 + EDR wireless technology to your USB desktop computer, or notebook

• Fast paring time between 3.5 to 5 sec.

• Lower power consumption

• Bit Error Rate (BER) improved performance

• Manufacturer’s Lifetime Warranty

• Offers backwards compatibility with any Bluetooth v1.1 and v1.2-compliant device

• Installs easily with Plug-and-Play convenience

• Allows you to work at distances of up to 100 metres (Class 1) and 10 metres (Class 2)**

• Supports Microsoft

** Range is dependent upon environment, number of users and other wireless devices within immediate proximity.

Windows® 98 SE, Me, 2000, XP, and Mac OS® X v10.3 and higher*

UK-5

System Requirements

PC System Requirements

• PC-compatible computer, CPU speed of 200MHz or above

• Memory: 64MB or above, 128MB recommended

• One available USB port, USB 1.1 or 2.0

• Windows 98 SE, Me, 2000, and XP

System Requirements

Mac

• One available USB port, USB 1.1 or 2.0

• Mac OS X v10.3 and higher*

*Mac OS X driver and software provided by Apple.

UK-6

Package Contents

UK-7

• Bluetooth USB Adapter

• CD-ROM for installation software and documentation

• User Manual on CD

• Quick Installation Guide

• Registration Card

UK-7

USB Adapter Specifications

Bluetooth Compliance: Version 2.0

Physical Interface: USB UHCI/OHCI 2.0-compliant

Operating Frequency: 2.4 to 2.4835GHz

Output Power: (F8T012) 4~20 dBm, Class I

Sensitivity: <0.1% BER @ -80 dBm

Data Rate: 3Mbps (effective throughput of 2.2 Mbps)

Typical Power Consumption: (F8T012) Tx: 150mA, Rx 80mA

Operating Range: (F8T012) 100-meter radius indoors

Network Topology: Point-to-Multipoint

Packet Support: 1/3/5 Slots Packet

Operation: Master/Slave

Frequency Stability: +/- 10PPM

(F8T013) -6~4 dBm, Class II

(F8T013) Tx: 65mA, Rx 45mA

(F8T013) 10-meter radius indoors

LED Indicator: Power On/Data Traffic

Antenna Type: Integrated, 0 +/- 1 dBi

Dimensions: 58mm (L) x 18mm (W) x 8mm (H)

Weight: 0.2oz. (7g)

Operating Temp: 0 to 70 degrees Celsius

Storage Temp: -30 to 80 degrees Celsius

Humidity: 5-90% (non-condensing)

Supply Voltage: 5.0V DC

Nominal Current: 100mA

Spread Spectrum: FHSS (Frequency Hopping

Spread Spectrum)

Modulation: GFSK (Gussian Frequency

Shift Keying)

Certifications: FCC, CE, ICES, C-Tick,

BQB, WHQL for XP

Specifications are subject to change without notice.

UK-8

Software Setup

UK-9

1. Insert the CD and wait for the software to run automatically.

2. Press on “Install Bluetooth Software”.

UK-9

Software Setup

Software Setup for Windows 98 SE, Me, 2000, and XP

To install the software for the USB Adapter, follow the instructions below:

Note: The installation process for Windows XP may look slightly different from

Windows 98 SE, Me, and 2000.

Note: Do not insert the USB Adapter into the USB port prior to software installation.

1. Insert the software installation CD-ROM into the PC’s CD-ROM drive.

2. The “Software InstallShield Wizard” window appears. Click on “Next” to begin the

installation process.

UK-10

Software Setup

UK-11

3. Choose “I accept the terms in the

license agreement” to accept the license agreement. Click on “Next” to continue.

4. Specify the location where the software

files will be installed on your hard drive. It is recommended that you install the software in the default directory “C:\Program Files\Belkin\Bluetooth Software\”. Click on “Next” to continue.

Software Setup

UK-12

5. Confirm that the device software is

ready to be installed and click on “Install”.

6. The InstallShield Wizard will begin to

install the Belkin Bluetooth Software. This may take several minutes.

Software Setup

UK-13

7. The Driver Signature Notice window will appear. Press OK for the next step.

UK-13

Software Setup

8. During the installation process you may be prompted to insert your USB Adapter.

If your USB Adapter is not plugged into your computer at this time, you may insert it into an available USB 1.1-compliant port on your desktop or notebook computer, then click “OK” to continue. Click on “Cancel” to continue installation without the Bluetooth device inserted. Refer to the “Hardware Installation” section of this User Manual for instructions for installing the hardware.

Note: If at any time during the installation process you receive a “Driver Signature

Notice”, click “OK” to continue the installation process.

UK-14

Software Setup

UK-15

9. Confirm the completion of the software installation; click “Finish” and restart the

system if prompted to do so.

UK-15

Hardware Setup

Hardware Setup for Windows 98 SE, Me, 2000, and XP

Follow these instructions to install your USB Adapter on your PC.

Note: Your USB Adapter is sensitive to static electricity, which can damage its

delicate electrical components. To protect your device, always touch the metal chassis of your computer before handling the USB Adapter. This will ground any potential electrostatic discharge. Avoid touching the metal connector when handling the USB Adapter. Dry weather conditions or walking across carpeted floors may cause you to acquire an electrostatic charge.

1. Connect the USB Adapter directly to

an available USB A-type connector on your desktop or notebook computer. Your system should register a new USB device found.

2. Choose “Install from a list or specific

location”; then click “Next”.

UK-16UK-16

Hardware Setup

3. Browse for the location of the device

driver “:\Program Files\Belkin\ Bluetooth\Software\bin\” then click “Next”.

4. If you receive the following “Hardware

installation notice”, click on “Continue Anyway” to continue with

the installation process.

UK-17UK-17

Hardware Setup

UK-18

5. A window will appear that confirms the completion of the hardware installation;

click on “Finish” to complete the installation process.

Initial Configuration Wizard

UK-19

Configuring your computer for Windows 98 SE, Me, 2000, and XP

Once the installation process is complete you will be prompted by the “Initial

Bluetooth Configuration Wizard”. This Wizard will guide you through the initial setup of your Bluetooth device. Please follow the Wizard as prompted.

2. Name your computer with a friendly name. This is the name, which will be made

available when your computer is discovered by other Bluetooth devices.

UK-19

Initial Configuration Wizard

3. Choose the type of computer on which

you have installed the Belkin USB Adapter from the drop-down menu in the window.

4. Continue the Wizard to configure the

Bluetooth services that this computer will make available for use to other Bluetooth devices. Click “Next”.

UK-20

Initial Configuration Wizard

UK-21

5. Choose the Bluetooth services that

your computer will offer. The most common service for your computer type will be checked by default.

6. If you wish to configure another

Bluetooth device on this computer, click “Next”. Otherwise click “Skip”.

UK-21

Uninstalling the Software

Uninstalling the Software for Windows 98 SE, Me, 2000, and XP

Follow these instructions to uninstall your USB Adapter on your PC.

Go to your Taskbar and click Start. Click on settings and go to control panel.

1. In the Windows Control panel go to “Add and Remove programs”

UK-22

Uninstalling the Software

UK-23

2. select ‘Belkin Bluetooth Software’

and press “Remove”

3. Press “Yes”

UK-23

Uninstalling the Software

4. When removing the software, the following Windows message appears

‘Un-installing Bluetooth Devices..’ press “OK”.

UK-24

Uninstalling the Software

UK-25

5. You will need to restart your PC to finish with the process, press the “YES” button.

If the uninstall application for Windows 98/ME “hangs” and will not continue,

press Ctrl + Alt + Delete keys at the same time to bring up the task manager. If the item “Rundll” says “ Not Responding” select this item and click “End Task”. After doing this, the uninstall process should complete.

The Bluetooth device software has now been removed from your computer.

UK-25

How to use the Belkin Bluetooth software

1. If you have installed the device properly, a Bluetooth icon will have

appeared on your desktop.

2. Double click on the

The following “My Bluetooth places” window will appear:

icon “My Bluetooth places”

UK-26

How to use the Belkin Bluetooth software

UK-27

3. Make sure your phone has Bluetooth capability and the Bluetooth function on your phone is enabled and detectable.

4. Click on “View Devices in range” in the menu on the left.

UK-27

How to use the Belkin Bluetooth software

5. Once you can see your phone in the list, right click on the icon of the Phone. A menu will appear. Choose “Pair device”.

When pairing two devices with numeric input buttons (example: mobile phone, PDA, PC etc.), choose any pin code from 1-10 digits.The pin code must be the same on both devices being paired.

When pairing a device without numeric input buttons (example: headset, car kit), please enter default pin code 0000. The majority of devices will use pin code 0000, however default pin code 1234 is also used in isolated cases.

6. Enter ‘0000’ and press OK. In some rare cases you have to enter ‘1234’.

The next window will appear;

UK-28

+ 422 hidden pages