Belkin 42U User Manual

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Belkin Enclosure

User Manual

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Table of Contents

Product Description and Inventory .................................................................................4

Product Inventory .............................................................................................................

Features of the Enclosure ............................................................................................

Before you Install .............................................................................................................

Unpacking your Enclosure ...............................................................................................

Unpacking Instructions ................................................................................................

Installing your Belkin Enclosure .......................................................................................

Leveling you Enclosure ................................................................................................

Removing your Casters and Levelers ..........................................................................

Removing and Installing your Side Panels ......................................................................

Removing and Installing your Top Panel .......................................................................

Ganging or Networking your Enclosures .......................................................................

Reversing your Front Door .............................................................................................

Adjusting your Vertical Mounting Rails ..........................................................................

Installing your Equipment ...............................................................................................

Grounding Studs ........................................................................................................

Cable Management ........................................................................................................

Cable Access .................................................................................................................

Specifications .................................................................................................................19

Accessories .................................................................................................................... 20

Warranty and Service .....................................................................................................

LIMITED LIFETIME WARRANTY ................................................................................

Contact Information .......................................................................................................

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Product Description and Inventory

The Belkin Enclosure is an industrial-grade, high-performance enclosure for the IT and telecommunication industries. The Enclosure has full compliance with the 19” rack-mount hardware EIA 310-D industry standard. The Belkin Enclosure is designed for the optimal performance of applications with servers, voice, data, networking, internetworking, cable management, power distribution, and power protection equipment.

Belkin Enclosures

Part Number RMU Height

Nominal Enclosure Height w/ Casters

Nominal Enclosure Width Description

RK1000ek 42 80.25” (2038mm) 24” (610mm) Enclosure with Sides RK1001ek 42 80.25” (2038mm) 24” (610mm)

Enclosure w/o Sides

RK1002ek 24 48.75” (1238mm) 24” (610mm) Enclosure with Sides

Side panels are available for those Enclosures ordered without sides. Side panels are available in pairs with hardware included.

Part Number

Description

RK5009ek Side Panels for 42U Enclosure

Your Enclosure comes with 50 Metric 6mm Black Screws with Cage Nuts. If you require more, please see part number below:

Part Number Description

RK5034ek Metric 6mm Black Screw with Cage Nuts (25)

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Product Inventory

Features of the Enclosure

1 Side Panels with Locks 2 Vertical Rails (Adjustable) 3 Reversible Front Doors 4 Fully Welded Frame 5 Leveling Feet (Adjustable) 6 Casters 7 Split Rear Doors 8 Vented Top Panels 9 Cable Access

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Before you Install

Instructions must be read completely before installation.

When this caution symbol appears in this User Manual, the information that accompanies it is critical to your safety and the prevention of damage to product.

Before unpacking, please make sure you have the following tools:

Phillips Screwdriver Utility Knife Level

3/4” (19mm) Open Ended Wrench 1/2” (13mm), 3/8” (10mm) and 7/16” (11mm)

Hex Sockets

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

1. Removal of the stretch wrap. To prevent damage to the Enclosure, cut the stretch wrap at one of the corrugated corners using a utility knife.

2. Remove the corrugated top and corners.

3. Remove the skid brackets from the skid, using a 1/2” (13mm) socket wrench. Remove the hex from the Enclosure by using the 3/8” (10mm) socket wrench.

4. This step requires two or more people. With one person standing on each side of the Enclosure, slowly roll the Enclosure to the back of the skid. Proceed until all four casters contact the floor.

5. Verify that you have received all hardware and components with your Belkin Enclosure. Contact Belkin support if you feel items are missing.

Unpacking your Enclosure

DETAIL A

Mounting hardware and keys can be found in bag attached to one of the vertical mounting rails.

Unpacking Instructions

1 Corrugated top 2 Stretch wrap 3 3/8” (10mm) hex 4 1/2” (13mm) hex 5 Corrugated corners 6 Shipping skid 7 Skid brackets

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Leveling your Enclosure

1. Move your Enclosure to it’s final location.

2. Once in place use your 3/4” (19mm) wrench to lower the adjustable levelers so that the weight of the Enclosure is taken off of the casters.

3. Using a level and your wrench, adjust the levelers so that your Enclosure is level.

Removing your Casters and Levelers

The following steps require two or more people.

1. Using two or more persons, lay your Enclosure on it’s side.

2. Unscrew the levelers

3. Using a 1/2” (13mm) hex socket, remove the 5/6” (21mm) nuts holding the casters

4. Return Enclosure to upright position.

Installing your Belkin Enclosure

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Removing and Installing your Side Panels

1. If side panel is locked, please unlock.

2. Slide both latches toward the center of the side panel, and carefully pull side panel toward you.

3. Lift side panel up and remove from Enclosure.

4. To re-install, reverse above steps.

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Removing and Installing your Top Panel

The center portion of the top of your Enclosure is attached with four #10-32 Phillips pan head screws. This top panel can be replaced with optional fan tops by removing the four #10-32 screws. Please see chart below.

Tools required: Phillips Pan Head Screw Driver

#10-32 Phillips Pan Head Screw

Part Number Description

RK5004ek 3 muffin fan top, 225 CFM RK5006ek Double 10” fan top, 1100 CFM

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Ganging or Networking your Enclosures

Networking hole (4 locations)

Enclosure A

Enclosure B

Use Belkin part number RK5008ek (optional enclosure baying kit). No additional tools required.

1. Remove plastic button plugs from enclosure corner posts (4).

2. Remove at least one side panel from adjoining enclosures.

3. Line up enclosures, install baying hardware.

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Reversing your Front Door

1. Open door and reverse handle. See Figure A.

2. Secure door with one hand while you pull down the top hinge pin (Figure B) with the other.

3. Grab door on both sides and lift up to remove door and set it aside.

4. Remove hinge pin brackets using Phillips head screwdriver, turn and reattach hinge pin brackets to opposite corners (Figure C).

5. Remove button plugs by pushing from the back side and retain for reuse.

6. Remove latch bracket and door stops (2) using Phillips head screwdriver while holding

lock

nut in back. Turn and place bracket and door stops (2) on the opposite side (Figure D).

7. Put push buttons back into holes on opposite side.

8. Rehang door.

NOTE: The best time to reverse the door is prior to installing the equipment. Standard factory door configuration is left-hand hinged.

Figure A

Remove handle and reverse

Figure B

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Reversing your Front Door

Figure C

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Figure D

Reversing your Front Door

Latch Bracket

Door Stops

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Adjusting your Vertical Mounting Rails

The universal M6 cage nut rails are preset at a 29” (737mm) depth. This depth allows for the installation

of most rack-mountable equipment. Rails are infinitely adjustable front to back.

The best time to move the rails is before installation of equipment.

To adjust your rails, loosen the rail bolts (4) with a 7/16” (11mm) hex socket.

Use a 7/16” (11mm) Hex Socket to loosen bolt

Vertical Mounting Rail

Full Depth Front to Rear Adjustability

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Installing your Equipment

All Belkin Enclosures conform to the 19” EIA 310-D industry standard. The vertical mounting rail has 42 Rack-Mount Units (RMU). An (RMU) consists of a 1.75” (44mm)

vertical rack space.

Grounding Studs

The ten grounding studs on the Enclosure are located on the doors, side panels, and frame.

Number of studs Location

2 Base 2 Front door 4 Rear doors (2 each) 2 Side panels (1 each)

Please refer to part number RK5038ek for the optional Belkin enclosure grounding kit.

1.75( ")

1 RMU

• Load your rack from the bottom up, placing the heaviest components at the lowest position.

• Please follow the individual instructions that are provided with the components you are installing.

• After installation of your equipment, extend only one component at a time.

• For proper air flow, please use filler panels (optional) per component manufacturer recommendations.

GROUND STUD : #10-32 x 1-7/8" LG

LTIPLE STRAPS

(44mm)

(22mm)

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Part Number Description Image

RK5001ek Waterfall Cable Manager

RK5002ek Vertical Finger Cable Manager

RK5012ek Double Sided 1U Cable Manager

RK5013ek Double Sided 2U Cable Manager

RK5016ek Single Sided Cable Manager

Cable Management

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

• Your Belkin Enclosure provides easy cable access.

• The top has two rectangular and four grommeted access points.

• The rear corner posts have two integrated cable knock-outs.

• These knock-outs can be removed when ganging two or more Enclosures together.

• These knock-outs will still allow you to have cabinet-to-cabinet access with a side panel in place.

• Access through the bottom is achieved through one large center opening, an additional rectangular point in the rear and four grommeted access points.

2 1/2” (13mm) x 6” (152mm) (4x)

3 3/4” (19mm) x 7 1/2” (13mm) (2x)

2” (51mm) Diameter (4x)

3 3/4” (19mm) x 9” (229mm) (1x)

13” (330mm) x 21” (533mm) (1x) Bottom

Cable Access

2” (51mm) Diameter (4x)

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Specifications

RK1000ek RK1002ek RK1001ek

Description Measurement

Height with Casters (Standard) 80.25 in (203.8 cm) 48.75 in (123.8 cm) Width 24 in (60.96 cm) 24 in (60.96 cm) Depth 42 in (106.7 cm) 42 in (106.7 cm) Weight 335 lbs. (152 kg) 295 lbs. (133.8 kg)

275 lbs. w/o sides (124.7 kg)

Shipping Weight 375 lbs. (170.1 kg) 335 lbs. (152 kg)

315 lbs. w/o sides (147.9 kg)

Open Area Front Door 861.8 in

(5560 cm2) 484.8 in2 (3218 cm2)

Open Area Rear Door 830.2 in

(5356 cm2) 474.3 in2 (3060 cm2)

Open Front Door Area Measured per U 20.5 in

(132.3 cm2) 20.2 in2 (130.3 cm2)

Open Rear Door Area Measured per U 19.8 in

(127.7 cm2) 19.7 in2 (127.1 cm2) Wiring Clearance between Vertical Rail & Front Door*

2.5 in (6.35 cm) 2.5 in (6.35 cm)

Static Weight Rating 2200 lbs. (997.9 kg) 2200 lbs. (997.9 kg) Dynamic Weight Rating 2000 lbs. (907.2 kg) 2000 lbs. (907.2 kg)

* Front rail adjustable for additional clearance

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Part No. Description

RK5003ek Perforated Top Panel RK5004ek Top Panel with 3 Muffin Fan RK5006ek Top Panel with Two 10” (254mm) 1100 CFM Fans RK5008ek Baying kit RK5009ek Pair of Side Panels RK5018ek 26” (660mm) Deep Sliding Shelf, 110 lb. Capacity RK5019ek 32” (813mm) Deep Sliding Shelf, 110 lb. Capacity RK5021ek 28” (711mm) Deep Front & Rear Mount Stationary Vented Shelf RK5022ek Pivoting Keyboard Tray with Mouse Tray RK5023ek Stationary Shelf - Cantilevered RK5027ek Stationary Front Mount Shelf RK5030ek Filler Panel Kit - 2 ea. of 1U/2U/3U RK5031ek 1U Filler Panel (set of 2) RK5032ek 2U Filler Panel (set of 2) RK5033ek 3U Filler Panel (set of 2) RK5034ek Package of 25 M6 Cage Nuts w/Screws RK5035ek Casters, Set of 4, Non-locking

Please contact your local Belkin representative for ordering information.

Accessories

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

Warranty and Service

LIMITED LIFETIME WARRANTY

What this Warranty covers.

Belkin Corporation warrants to the original purchaser of any Belkin enclosure, that the Enclosure shall be free of defects in design, assembly, material, or workmanship.

What the period of coverage is.

Belkin Corporation warrants the Belkin Enclosure for as long as the original purchaser owns it.

What will we do to correct problems?

Enclosure Warranty. Belkin will repair or replace, at its option, any defective Enclosure free of charge (except for shipping charges for the Enclosure).

What is not covered by this Warranty?

All above warranties are null and void if the Belkin Enclosure is not provided to Belkin Corporation for inspection upon Belkin’s request at the sole expense of the purchaser, Belkin Corporation determines that the Belkin Enclosure has been improperly installed, altered in any way or tampered with. The Belkin Enclosure Warranty does not protect against acts of God (other than lightning) such as flood, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low-voltage disturbances (i.e. brown

outs or sags), non-authorized program, or system equipment modification or alteration.

How to get service.

To get service for your Belkin Enclosure you must take the following steps:

1. Contact Belkin Ltd., Express Business Park

, Shipton Way, Rushden, NN10 6GL, United Kingdom, Attn: Customer Service, or call 00 800 223 55 460, within 15 days of the Occurrence.

Be prepared to provide the following information: a. The part number of the Belkin Enclosure. b. Where you purchased the Enclosure. c. When you purchased the Enclosure. d. Copy of original receipt.

2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin Enclosure and how to proceed with your claim.

Belkin Corporation reserves the right to review the damaged Belkin Enclosure. All costs of shipping the Belkin Enclosure to Belkin Corporation for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin Corporation, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of ship

ping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin Corporation reserves the right to be subrogated under any existing insurance policies the purchaser may have.

Belkin Enclosure - User Manual v 1.0.0ek P74789ec

How state law relates to the Warranty.

THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN CORPORATION, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL BELKIN CORPORATION BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN ENCLOSURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This Warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you.

+ 50 hidden pages