49735 Molded Cable Assemblies - GPIB (General Purpose Interface Bus) Assembly
4
For more information please
call
1-800-Belden1
See Put-ups and Colors
Description:
GPIB shielded, for use with electronic equipment that is IEEE-488 compatible, molded PVC connector, S-R PVC insulation, PVC jacket.
PHYSICAL CHARACTERISTICS:
CONDUCTOR:
Number of Pairs 6
Number of Conductors 11
Total Number of Conductors 23
Number of Pins 24
AWG :
Number of
Conductors
10 26 7x34 TC - Tinned
1 24 7x32 TC - Tinned
Number of
Pairs
6 26 7x34 TC - Tinned
Number of
Coax
Number of
Triads
AWG Stranding Conductor
Material
Copper
Copper
Copper
Conductor
Diameter (in.)
INSULATION:
Insulation Material S-R PVC - Semi-Rigid Polyvinyl Chloride
Nom. Insulation Wall Thickness 0.01 in.
OUTER SHIELD:
Outer Shield Trade Name Beldfoil®
Outer Shield Type Tape/Braid
Outer Shield Material :
Layer Number Trade Name Type Material % Coverage (%)
1 Beldfoil® Tape Aluminum Foil-Polyester
Tape
2 Braid TC - Tinned Copper 90
OUTER SHIELD DRAIN WIRE :
Outer Shield Drain Wire AWG 26
Outer Shield Drain Wire Stranding 7x34
Outer Shield Drain Wire Conductor Material TC - Tinned Copper
OUTER JACKET:
Page 1 of
100
49735 Molded Cable Assemblies - GPIB (General Purpose Interface Bus) Assembly
4
Outer Jacket Material PVC - Polyvinyl Chloride
Outer Jacket Nominal Wall Thickness 0.035 in.
OVERALL NOMINAL DIAMETER:
Overall Nominal Diameter .350 in.
ASSEMBLY DIMENSIONAL CHARACTERISTICS:
Assembly Dimensional Length 6.6 ft.
CONNECTOR CHARACTERISTICS:
FIRST END :
Connector Characteristics - First End Connector Type Stackable Ribbon
Connector Characteristics - First End # of Connector
Contacts/positions
Connector Characteristics - First End Connector
Gender
Connector Characteristics - First End Connector
Shielding Type
Connector Characteristics - First End Overmold Type GPIB
Connector Characteristics - First End Overmold
Compound Material
Connector Characteristics - First End Overmold Color Gull Gray
Connector Characteristics - First End Retention
Hardware
24
Male/Female
Metal Backshells
PVC
Thumbscrews
SECOND END :
Connector Characteristics - Second End Connector
Type
Connector Characteristics - Second End # of
Connector Contacts/positions
Connector Characteristics - Second End Connector
Gender
Connector Characteristics - Second End Connector
Shielding Type
Connector Characteristics - Second End Overmold
Type
Connector Characteristics - Second End Overmold
Compound Material
Connector Characteristics - Second End Overmold
Color
Connector Characteristics - Second End Retention
Hardware
Wiring Straight wired
WIRING DIAGRAM:
Wiring Diagram Color Code Chart :
Stackable Ribbon
24
Male/Female
Metal Backshells
GPIB
PVC
Gull Gray
Thumbscrews
Page 2 of
49735 Molded Cable Assemblies - GPIB (General Purpose Interface Bus) Assembly
4
Number Color
1 Brown
2 Red
3 Orange
4 Yellow
5 Green
6 Blue (pair 1)
7 Purple (pair 2)
8 Gray (pair 3)
9 White (pair 4)
10 White/Black (pair 5)
11 White/Brown (pair 6)
12 Drain wire
13 White/Orange
14 White/Yellow
15 White/Green
16 White/Blue
17 White/Purple
18 White/Gray (pair 1)
19 White/Black/Brown (pair 2)
20 White/Black/Red (pair 3)
21 White/Black/Orange (pair 4)
22 White/Black/Yellow (pair 5)
23 White/Black/Green (pair 6)
24 White/Black/Blue (24 AWG)
MECHANICAL CHARACTERISTICS:
UL Temperature Rating 80°C (UL AWM Style 2464)
APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE:
NEC/(UL) Specification CM (cable only)
AWM Specification UL Style 2464 (300 V 80°C) (cable only)
APPLICABLE STANDARDS:
EU RoHS Compliant (Y/N) Yes
EU RoHS Compliance Date (mm/dd/yyyy): 04/01/2005
PLENUM/NON-PLENUM:
Plenum (Y/N) N
ELECTRICAL CHARACTERISTICS:
Max. Operating Voltage - UL 300 V RMS (UL AWM Style 2464)
NOTES:
Notes
Molded connector is male/female design for easy stacking and comes with moldedin metric jackscrews.
Page 3 of
49735 Molded Cable Assemblies - GPIB (General Purpose Interface Bus) Assembly
4
PUT-UPS AND COLORS:
Item Description Put-Up (ft.) Ship Weight (lbs.) Jacket Color Notes
49735 C62S2 GPIB SHD MOLD
CABLE RI38601
Revision Number: 1 Revision Date: 05-13-2005
© Copyright 2006 Belden, Inc
All Rights Reserved.
Although Belden ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication, information and
specifications described herein are subject to error or omission and to change without notice, and the listing of such information and
specifications does not ensure product availability.
Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express,
statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or
exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,
negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described
herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with the following environmental regulations: California Proposition 65 Consent Judgment
For Wire & Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS (Directive 2002/95/EC, 27-Jan-
2003);Material manufactured prior to the compliance date may still be in stock at Belden facilities and in our Distributor's inventory. EU
ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive 2002/96/EC, 27-Jan-2003); And EU BFR (Directive 2003/11/EC, 6-Feb-
2003). The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the
Product Disclosure, is correct to the best of Belden's knowledge, information and belief at the date of its publication. The information
provided in the Product Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product
itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification. Regulatory
information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations
based on their individual usage of the product.
S2 1.6 GRAY, GULL
Page 4 of
Loading...