Page 1
INSTRUCTIONSINSTRUCTIONS
Catalog No. 37896-0000, 37897-0000, 37898-0000, 37899-0000
1. Assembly
Hold the pipette close to its upper end and insert into
the chuck of the pump with a slight pressure and twist counter
clockwise. This assures a secure fit. WARNING – Extreme care
should be taken when inserting disposable glass pipettes because
of the possibility of shattering. To loosen the pipette, hold it near
the chuck, twist slightly clockwise and pull.
2. Operation
The length and diameter of THE PIPETTE PUMP™ fit the hand comfor tably, providing in ease and accuracy
of operation. Constructed with acid-resistant and practically unbreakable plastic. Submerge the end of the
pipette into the solution and turn the operating wheel with the thumb. Fluid will be drawn into the pipette.
To expel fluid, turn the wheel in the opposite direction. For fast emptying, press down on the plunger top.
3. Spare Parts for the Pipette Pump™
Model Pipette Chuck Silicone Washers (set)
F37896-0000 H93789-0060 H93789-0061
-0000 H93789-0070 H93789-007 1
F37897
F37898-0000 H93789-0080 H93789-0081
F37899-0000 H93789-0090 H93789-0091
The Pipette Pump™
Catalog No. 37896-0000, 37897-0000, 37898-0000, 37899-0000
1. Assembly
Hold the pipette close to its upper end and insert into
the chuck of the pump with a slight pressure and twist counter
clockwise. This assures a secure fit. WARNING – Extreme care
should be taken when inserting disposable glass pipettes because
of the possibility of shattering. To loosen the pipette, hold it near
the chuck, twist slightly clockwise and pull.
2. Operation
The length and diameter of THE PIPETTE PUMP™ fit the hand comfor tably, providing in ease and accuracy
of operation. Constructed with acid-resistant and practically unbreakable plastic. Submerge the end of the
pipette into the solution and turn the operating wheel with the thumb. Fluid will be drawn into the pipette.
To expel fluid, turn the wheel in the opposite direction. For fast emptying, press down on the plunger top.
3. Spare Parts for the Pipette Pump™
Model Pipette Chuck Silicone Washers (set)
F37896-0000 H93789-0060 H93789-0061
-0000 H93789-0070 H93789-007 1
F37897
F37898-0000 H93789-0080 H93789-0081
F37899-0000 H93789-0090 H93789-0091
The Pipette Pump™
Pipette Pump™ is a trademark of Bel-Art – SP Scienceware.
Bel-Art – SP Scienceware assumes no obligation or liability for any advice furnished by it,
or for results obtained with respect to these products.
All such advice is given and accepted at the buyer’s risk.
© 2018. All Rights Reserved.
Bel-Art® – SP Scienceware® is a division of SP Industries, Inc.
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
999320617 – 08/18
Pipette Pump™ is a trademark of Bel-Art – SP Scienceware.
Bel-Art – SP Scienceware assumes no obligation or liability for any advice furnished by it,
or for results obtained with respect to these products.
All such advice is given and accepted at the buyer’s risk.
© 2018. All Rights Reserved.
Bel-Art® – SP Scienceware® is a division of SP Industries, Inc.
999320617 – 08/18
Loading...