Recommendations for preservation of frozen food ...................................16
Placing the food ......................................................................................16
Replacing the interior light module ...........................................................16
Things to be done for saving energy ........................................................16
5 Deep-freeze information >17
6 Cleaning your refrigerator >18
7 Service >19
8 Recommended solutions for the problems >20
EN1
1 The refrigerator
3
1
5
6
4
17
22
17
20
7
8
7
2
9
18
23
18
10
7
11
12
19
18
13
15
1616
21
14
18
1 Freezer compartment12 Crisper cover
2 Fridge compartment13 Crisper or chiller compartment
3 Freezer compartment interior light14 Crisper or chiller compartment adjustment slider
4 Icematic 15 Ventilation lid
5 Fresh Freeze compartment16 Adjustable front legs
6 Freezer compartment shelf17 Freezer compartment door racks
7 Odor filter (Carbon)18 Fridge compartment door racks
8 Fridge compartment glass shelves19 Bottle holder
9 Adjustable bottle holder20 Egg holder
10 Fridge compartment interior light21 Blue light
11 Second floor crisper22 Temperature setting panel and indicator
23 Water Spring
• Figures that take place in this instruction manual are schematic and may not
correspond exactly with your product. If the subject parts are not included in the
product you have purchased, then it is valid for other models.
EN2
2 Warnings
Safety warnings
• When you want to dispose/scrap the
product, we recommend you to consult
the authorized service in order to learn
the required information and authorized
bodies.
• Do not damage the cooling circuit.
• Do not use any electrical tools other
than those recommended by the
manufacturer inside the food storage
compartments of the product.
• Consult your authorized service for all
your questions and problems related to
the refrigerator. Do not intervene or let
someone intervene to the refrigerator
without notifying the authorized services.
• Do not eat cone ice cream and ice
cubes immediately after you take them
out of the freezer compartment! (This
may cause frostbite in your mouth.)
• Do not put bottled and canned liquid
beverages in the freezer compartment.
Otherwise, these may burst.
• Do not touch frozen food by hand;
they may stick to your hand.
• Vapor and vaporized cleaning
materials should never be used in
cleaning and defrosting processes of
your refrigerator. In such cases, the
vapor might get in contact with the
electrical parts and cause short circuit or
electric shock.
• Never use the parts on your
refrigerator such as kick plate or door as
a means of support or step.
• Do not use electrical devices inside
the refrigerator.
• Do not operate a damaged
refrigerator. Consult your service if you
have any doubts.
• Do not damage the parts, where the
refrigerant is circulating, with drilling or
cutting tools. The refrigerant that might
blow out when the gas channels of the
evaporator, pipe extensions or surface
coatings are punctured may cause skin
irritations and eye injuries.
• Do not cover or block the ventilation
holes on your refrigerator with any
material.
• Only authorized service personnel may
make any repair on electrical appliances.
Repairs performed by incompetent
persons may create a risk for the user.
• In case of any failure or during a
maintenance or repair work, disconnect
your refrigerator’s mains supply by
either turning off the relevant fuse or
unplugging your appliance.
• Be careful not to pull by the cable
when pulling the plug out.
• Electrical safety of your refrigerator
shall be guaranteed only if the earth
system in your house complies with
standards.
• Do not allow children play with your
refrigerator. They might harm themselves
and the refrigerator. (E.g. do not allow
them hang from the door.)
• Place the beverage with higher proofs
tightly closed and vertically.
• Flammable items or products that
contain flammable gases (e.g. spray) as
well as the explosive materials should
never be kept in the appliance.
• Do not use mechanical devices
or other means to accelerate the
defrosting process, others than those
recommended by the manufacturer.
EN3
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge,unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
Electrical safety
This product is designed for indoor use.
It is not appropriate to use it outdoor
even if the place is covered with a roof.
Exposing the product to rain, snow, sun
and wind is dangerous with respect to
electrical safety.
If the power cable is damaged, it must
be changed by the manufacturer or
customer services in order to avoid
potential risks to you.
Caution: Never plug the refrigerator
into the wall outlet during installation.
Otherwise, risk of death or serious injury
may arise.
HCA Warning
If your product is equipped with
a cooling system that contains
R600a:
This gas is flammable. Therefore, pay
attention to not damaging the cooling
system and piping during usage and
transportation. In the event of damage,
keep your product away from potential
fire sources that can cause the product
catch a fire and ventilate the room in
which the unit is placed.
Ignore the warning.
If your product is equipped with
a cooling system that contains
R134a.
You can see the gas used in production
of your product on the rating plate that
is located on the left inner part of it.
Never dispose the product in fire.
EN4
3 Placing and assembly of your refrigerator
• When you operate your refrigerator
• Please remember that the
manufacturer shall not be held liable
if the information given in the
instruction manual is not observed.
This product is designed for
domestic use.
Prior to operating your refrigerator,
please read the instruction manual
carefully that includes important
information such as installation,
usage and maintenance of your
product.
Preparation
Your refrigerator should be installed at
least 30 cm away from heat sources
such as hobs, ovens, central heater
and stoves and at least 5 cm away
from electrical ovens and should not be
located under direct sunlight.
• The ambient temperature of the
room where you install your refrigerator
should at least be 10°C. Operating your
refrigerator under cooler conditions than
this is not recommended with regard to
its efficiency.
• Please make sure that the interior of
your refrigerator is cleaned thoroughly.
• If two refrigerators are to be installed
side by side, there should be at least 2
cm distance between them.
• Your refrigerator must run smoothly
without any vibration. To ensure
this, maintain the balance of your
refrigerator on the floor by turning
the adjustable front legs clockwise
or counterclockwise. This should be
done before the food is placed in the
refrigerator.
for the first time, please observe the
following instructions during the initial six
hours.
- Temperature adjustment button should
not be turned off.
- The door should not be opened
frequently.
- It must be operated empty without any
food in it.
- Do not unplug your refrigerator; if a
power failure occurs out of your control,
please see the warnings in section
“Things to be done before calling the
authorized service”.
• Original packaging and foam materials
should be kept for future transportations
or moving.
Points to be considered when
transporting the product:
1. Your refrigerator must be emptied and
cleaned prior to any transportation.
2. Shelves, accessories, crisper and etc.
in your refrigerator must be fastened
securely by adhesive tape against any
jolt before repackaging.
3. Packaging must be tied with thick
tapes and strong ropes and the rules of
transportation printed on the package
must be followed.
Please remember…
Every recycled material is an
indispensable source for the nature and
for our national resources.
If you wish to contribute to recycling the
packaging materials, you can get further
information from the environmental
bodies or local authorities.
EN5
If the entrance door of the room where
the refrigerator will be installed is not
wide enough for the refrigerator to
pass through, than call the authorized
service to have them remove the doors
of your refrigerator and pass it sideways
through the door.
1. Install your refrigerator to a place that
allows ease of use.
2. Keep your refrigerator away from
heat sources, humid places and direct
sunlight.
Dimensions of your refrigerator
74.5 cm
84 cm
3. There must be appropriate air
ventilation around your refrigerator in
order to achieve an efficient operation.
If the refrigerator is to be placed in a
recess in the wall, there must be at least
5 cm distance with the ceiling and at
least 5 cm with the wall.
If the floor is covered with a carpet, your
product must be elevated 2.5 cm from
the floor.
4. Place your refrigerator on an even
floor surface to prevent jolts.
5. Do not keep your refrigerator in
ambient temperatures under 10°C.
Adjusting the legs
If your refrigerator is unbalanced;
1. You can balance your refrigerator by
turning the front legs of it as illustrated
in the figure. The corner where the leg
exists is lowered when you turn in the
direction of black arrow and raised when
you turn in the opposite direction. Taking
help from someone to slightly lift the
refrigerator will facilitate this process.
Usage area measures
Following figure shows the required
place to allow you use your refrigerator
most efficiently.
134 cm
143.5 cm
Changing the door opening
direction
Opening direction of your refrigerator’s
door can not be changed.
EN6
Operating your refrigerator
Before you start using the fridge/freezer
check the following:
1. Have the feet been adjusted so that
the product stands level?
2. Is the interior of the refrigerator dry
and can the air circulate freely in the rear
of it?
3. Clean the interior of the refrigerator
as recommended in the “Cleaning your
refrigerator” section.
4. Plug the refrigerator into the wall
outlet.
• When the door is open the respective
interior light will come on.
5. You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise, even
if the compressor is not running and this
is quite normal.
Due to the operation of fans inside the
appliance, overall noise level is slightly
higher in comparison to non-frost free
appliances. This is quite normal and is
not a fault.
6. Front edges of the refrigerator may
feel warm. This is normal. These areas
are designed to be warm to avoid
condensation.
7. Do not fill the interiors of the
refrigerator in initial operation for the first
12 hours.
8. When the compartments reach the
desired temperatures fans will stop.
9. Especially pay special attention to
prevent the foodstuffs, in particular,
small pieces, such as rice, peas
and beans from running into the fan
protectors and air flow ducts. These
may cause clogging of the cooling
system and a decrease in the efficiency
of the device.
10. The factory set temperature is 4°C
in average for fridge compartment
and -18°C maximum for freezer
compartment.
11. The compressor will start running
approximately 8 minutes after the
refrigerator is plugged in to protect
the electronic components of your
appliance. After startup of the
compressor, compartment temperatures
will reach to the setup temperatures in
24 hours depending on the ambient
temperature and load status of your
refrigerator.
12. Pay attention to the following
points during the first 24 hours of the
operation:
• Do not open the doors frequently.
• Do not overload your refrigerator.
• Do not put hot food.
EN7
4 Using your refrigerator
Temperature setting buttons and temperature control
Control buttons allow you to make the settings of your refrigerator easily and without
opening the doors. Thus, heat loss is avoided.
Eco Extra /Sleep
Function Button
Freezer Set Button
Freezer Compartment
Temperature indicator
Fresh Freeze Function
Indicator
Freezer Compartment
Temperature Setting Indicator
Eco Extra Indicator
Fresh Freeze Button
Economy Mode Indicator
Freezer
Compartment
Indicator
Sleep
Function
Indicator
Ionizer Indicator
Light
Quick Cool Button
Vacation Button / Key Lock
Fridge Set Button
High Temperature/ Error Warning Indicator
Key Lock Indicator
Fridge Compartment Temperature
Setting Indicator
Vacation Indicator
Fridge
Compartment
Indicator
Quick Cool
Function
Indicator
Fridge Compartment
Temperature Indicator
EN8
Fresh Freeze Function
Fresh Freeze indicator segments will
flash when the Fresh Freeze function is
active. To cancel this function, press the
Fresh Freeze button again. Fresh Freeze
indicator will turn off and return to its
normal settings. Fresh Freeze will cancel
itself automatically after about 12 hours
if you do not cancel it.
If you want to freeze large amounts of
fresh food, press the fresh freeze button
24 hours before putting the food into the
freezer compartment.
Press on Vacation Button to activate this
function. Vacation indicator lights up, “-”
is displayed in the Fridge Compartment
indicator and Fridge Compartment
temperature indicators and Fridge
Compartment indicator go out. This
function is cancelled when any button is
pressed. Empty the fridge compartment
before switching your refrigerator to
vacation status. Fridge compartment
door must be kept closed in this status.
Eco-Extra Function (Special
Economy function)
Quick Cool Function
When you press the Quick Cool button,
the temperature of the compartment will
be colder than the adjusted values. This
function can be used for food placed in
the fridge compartment and required to
be cooled down rapidly.
After activating the Quick Cool function
by pressing the Quick Cool button,
Quick Cool indicator will glow. Quick
Cool indicator segments will flash. To
cancel this function press Quick Cool
button again. Quick Cool indicator will
turn off and return to its normal settings.
Quick Cool function will cancel itself
automatically within 2 hours in case you
do not cancel it.
Vacation Function
In case the fridge compartment will not
be used for a long time, the usage of the
fridge compartment may be cancelled
by pressing on the Vacation Button. By
this way, the refrigerator may operate
more economically.
When Eco Extra button is pressed, Eco
Extra function is activated and Eco Extra
indicator light comes on. If the door of
the fridge compartment is kept closed
for a long time when this function is
selected, the fridge compartment will
switch to a more economic operation
mode to safe electricity automatically.
When the Eco Extra button is pressed
again and the Fresh Freeze button is
pressed, this function is deactivated.
Key Lock Button
The key lock is activated and a short
“beep” signal is heard when this button
is pressed for 5 seconds. All buttons are
deactivated. If you want to deactivate
key lock press the button again for 5
seconds.
EN9
Sleep Function
Sleep function is activated and a short
“beep” signal is heard when the Eco
Extra button is pressed for 3 seconds.
Sleep Function indicator comes on as
well. Your refrigerator operates in silent
mode maximum for 45 minutes when
this function is active. Press the Eco
Extra button again for 3 seconds to
cancel this function.
Fridge Compartment Temperature
Setting Indicator
Indicates the temperature set for the
Fridge Compartment.
Freezer Compartment Temperature
Indicator
Indicates the temperature in the Freezer
Compartment.
Ionizer Indicator Light
Ionizer indicator light lights up
continuously. This light indicates that
your refrigerator is protected against the
bacteria.
High Temperature/ Error Warning
Indicator Light
This light comes on during long lasting
power failures, high temperature failures
and error warnings.
Economy Function Indicator Light
This indicator light comes on when the
freezer compartment is set to -18°C
or the special economy function is
activated.
Freezer Compartment Temperature
Setting Indicator
Indicates the temperature set for the
Freezer Compartment.
Fridge Compartment Temperature
Indicators
Indicates the temperature in the Fridge
Compartment.
Operating your refrigerator
The factory setup temperature during
the first operation is 4 °C for fridge
compartment and -18 °C for freezer
compartment.
Your refrigerator’s compressor will start
running approximately 1 minutes after
the refrigerator is plugged in for the first
time. After startup of the compressor,
compartment temperatures will reach
to the setup temperatures in 24 hours
depending on the ambient temperature
and load status of your refrigerator.
When your refrigerator is in this mode,
pay attention to the following points
during the first 12 hours, or 24 hours
depending on the ambient temperature.
Full protection triangle:
Hygiene: Odor filter in the air duct of
the fridge compartment helps to clean
the air in the refrigerator. This filter
reduces the formation of bad odors by
means of its coating.
EN10
Silver:Inner surfaces of the refrigerator
are rendered antibacterial by means of
the silver-ion additive. Thus, growth and
reproduction of bacteria on interior body
parts are prevented.
Ion: Air is ionized by means of
the ionizer system in the fridge
compartment air duct. Thanks to this
system, air-borne bacteria and particles
that cause odor are removed.
Dual cooling system:
Your refrigerator is equipped with two
separate cooling system to cool the
fresh food compartment and freezer
compartment. Thus, air in the fresh food
compartment and freezer compartment
do not get mixed. Thanks to these
two separate cooling systems, cooling
speed is much higher then other
refrigerators.
Odors in the compartments do not get
mixed. Also additional power saving
is provided since the defrosting is
performed individually.
Setting the fridge compartment
temperature
Fridge compartment temperature
can be set at one of the following
temperatures:
8, 7, 6, 5, 4, 3 and 2°C. Press the
button to change. The temperature will
decrease by 1°C. Every time you press
the button, the temperature will go down
and then return to the highest setting.
Release at the desired temperature and
the new set temperature will be stored.
If you think that your food is colder
than you desired, you can adjust
the temperature setting of fridge
compartment to 7 or 8.
Setting the freezer compartment
temperature
Freezer temperature can be set at one
of the following temperatures : -18, -19,
-20, -21, -22, -23 and -24°C. Press the
button to change. The temperature will
decrease by 1°C. Every time you press
the button, the temperature will go down
and then return to the highest setting.
Release at the desired temperature and
the new set temperature will be stored.
Freezer Compartment
Adjustment
-18°C4°CThis is the normal recommended setting.
-20,-22 or -24°C4°C
Fresh Freeze indicator
flashes
-18°C or colder2°C
-18°C or colder
Fridge
Compartment
Adjustment
4°C
Quick Cool
indicator flashes
Explanations
These settings are recommended when the ambient
temperature exceeds 30°C.
Use when you wish to freeze your food in a short time.
Your refrigerator will return to its previous mode when
the process is over.
If you think that your fridge compartment is not cold
enough because of the hot conditions or frequent
opening and closing of the door.
You can use it when your fridge compartment is
overloaded or if you wish to cool down your food
rapidly.
EN11
Using the accessories
Humidity control in the crisper
Humidity level can be adjusted by sliding
the humidity adjustment slider to the
right or left.
• If you want to maintain humidity in
this compartment, set the humidity
adjustment slider to the closed position.
(Right)
• If you want to eliminate humidity in
this compartment, set the humidity
adjustment slider to the open position.
(Left)
Sliding shelves
Sliding shelves can be pulled out a little
bit in order to easily reach the food
placed at the rear of the shelf in the
fridge compartment and also for easier
cleaning. Sliding shelves must be lifted
up slightly before pulling forwards.
Blue light
Foodstuff stored in the crispers that are
enlightened with a blue light continue
their photosynthesis by means of the
wavelength effect of blue light and thus,
preserve their freshness and increase
their vitamin content.
Adjustable bottle holder
You can use the adjustable bottle
holders without sacrificing any place
by sliding them to left or right or by
interlacing them.
EN12
Installing the adjustable bottle
holders
You mast install the holders into the
channels in the following order in order
to use them appropriately.
-Bottle holder to remain at the left side
to the front channel in the rail.
-Bottle holder to remain in the middle to
the middle channel in the rail.
-Bottle holder to remain at the rear side
to the rear channel in the rail.
Verify the position of the horizontal wires
during installation.
Fresh Freeze compartment
This compartment freezes your food
quickly and preserves their tastes and
nutritional values.
This is activated by pressing the relevant
button on the indicator panel. This
compartment can be removed without
using any tools when desired.
Ionizer
It is in the air channel of refrigerator back
side of the crisper. With ionizing the air,
airborne bacteria and the bad smell
originated from these bacteria will be
reduced.
Icematic and ice storage
container
Using the Icematic
Fill the Icematic with water and place
it into its seat. Your ice will be ready
approximately in two hours. Do not
remove the Icematic from its seating to
take ice.
Turn the knobs on it clockwise by 90
degrees.
Ice cubes in the cells will fall down into
the ice storage container below.
You may take out the ice storage
container and serve the ice cubes.
If you wish, you may keep the ice cubes
in the ice storage container.
Ice storage container
Ice storage container is only intended for
accumulating the ice cubes. Do not put
water in it. Otherwise, it will break.
Egg holder
You can install the egg holder to the
desired door or body shelf except the
freezer compartment.
EN13
Water Spring
In addition to allowing you to obtain cold
water without opening the door of your
refrigerator, this accessory also helps
you to save energy since you do not
need to open and close the door of your
refrigerator frequently and thus, the cold
air is kept inside.
Using the water spring
Press in the latch of the water spring
with your glass. Water spring will open
and water will pour into your glass.
Latch of the water spring will return to
its original position and water flow will
stop when you take your glass.
Filling in the water reservoir
Open the lid of the water reservoir
located inside of the door as
illustrated and fill in with water at room
temperature or colder using a carafe.
Close the lid.
You can remove the water reservoir to
fill it outside the refrigerator and also to
clean it.
You can easily carry the water reservoir
by its handle.
Warning!
Water spring is only intended for use
with drinking water. Do not put hot
water, juice, milk and gaseous or
alcoholic beverages into the water
reservoir.
If there is a power failure (water can not
be obtained from the water dispenser if
your refrigerator is not energized.)
Dripping Crenel
Water drops that drip while using
your water spring accumulates in
the dripping crenel at the lower side.
Remove the dripping crenel to remove
the accumulated water. You can remove
the water with a sponge or a soft cloth.
Cleaning the water reservoir
Take out the water reservoir after
removing the cover mechanism on the
left hand side as illustrated in the figure.
Clean the water reservoir with warm
water, replace it and close the cover on
the left hand side.
Make sure that the cover on the right
hand side fits into the water inlet hole
after installing the water reservoir.
Otherwise, water leakage may occur.
(Washing in the dishwasher may cause
the water reservoir to get scratched.)
EN14
Freezing fresh food
• It must be preferred to wrap or
cover the food before placing them in
the refrigerator.
• Hot food must cool down to the
room temperature before putting them
in the refrigerator.
• The foodstuff that you want to
freeze must be fresh and in good quality.
• Foodstuff must be divided into
portions according to the family’s daily
or meal based consumption needs.
• Foodstuff must be packaged in
an airtight manner to prevent them from
drying even if they are going to be kept
for a short time.
• Materials to be used for
packaging must be tear-proof and
resistant to cold, humidity, odor, oils and
acids and they must also be airtight.
Moreover, they must be well closed
and they must be made from easy-touse materials that are suitable for deep
freeze usage.
• Food to be frozen must be
put in the freezer compartment. (They
should not be allowed to come in
contact with the previously frozen
items to prevent their partial thawing.
Freezing capacity of our product is given
in the technical specifications of your
refrigerator.)
• Periods given in the information
about deep freeze must be obeyed for
storage times.
• Frozen food must be used
immediately after they are thawed and
they should never be re-frozen.
• Please observe the following
instructions to obtain the best results.
1.Do not freeze too large
quantities of food at one time. The
quality of the food is best preserved
when it is frozen right through to the
core as quickly as possible.
2. Placing warm food into the
freezer compartment causes the cooling
system to operate continuously until the
food is frozen solid.
3. Take special care not to mix
already frozen food and fresh food.
EN15
Recommendations for
preservation of frozen food
• Prepacked commercially frozen
food should be stored in accordance
with the frozen food manufacturer’s
instructions for a ( 4 stars) frozen
food storage compartment.
• To ensure that the high
quality achieved by the frozen food
manufacturer and the food retailer is
maintained, the following should be
remembered:
1.Put packages in the freezer as
quickly as possible after purchase.
2.Ensure that contents are
labeled and dated.
3.Do not exceed “Use By”, “Best
Before” dates on the packaging.
If there is a power failure do not open
the freezer door. Even if the power failure
lasts up to the “Temperature Increasing
Time” indicated in the “Technical
specifications of your refrigerator”
section, frozen food will not be affected.
In case the failure lasts longer, the food
must be checked and when necessary,
must be consumed immediately or must
be frozen after cooked.
Defrosting
The fridge and freezer compartments
defrost automatically.
Placing the food
Freezer compartment
shelves
Egg holderEgg
Fridge compartment
shelves
Fridge compartment
door shelves
CrisperVegetables and fruits
Chiller compartment
Various frozen food
such as meat,
fish, ice cream,
vegetables and etc.
Food in pans, plates,
closed containers
Small and packaged
food or drinks (such
as milk, fruit juice and
beer)
Meat and fish to be
thawed
Replacing the interior light
module
To change the light module of
your refrigerator, please call your
Authorized Service.
Things to be done for saving
energy
1. Do not leave the doors of your
refrigerator open for a long time.
2. Do not put hot food or drinks in your
refrigerator.
3. Do not overload your refrigerator so
that the air circulation inside of it is not
prevented.
4. Do not install your refrigerator under
direct sunlight or near heat emitting
appliances such as ovens, dishwashers
or radiators.
5. Pay attention to keep your food in
closed containers.
EN16
5 Deep-freeze information
Food must be frozen as rapidly as
possible when they are put in a
refrigerator in order to keep them in
good quality.
The TSE norm requires (according to
certain measurement conditions) the
refrigerator to freeze at least 4.5 kg of
foodstuff at 32°C ambient temperature
to -18°C or lower within 24 hours for
every 100-liters of freezer volume.
It is possible to keep the food for
a long time only at -18°C or lower
temperatures.
You can keep the freshness of food
for many months (at -18°C or lower
temperatures in the deep freeze).
Specifications” section in Part 1.
Always follow the values in the tables for
storage periods.
Frozen food must be used immediately
after they are thawed and they should
never be re-frozen.
WARNING!
• Foodstuff must be divided into
portions according to the family’s daily
or meal based consumption needs.
• Foodstuff must be packaged in an
airtight manner to prevent them from
drying even if they are going to be kept
for a short time.
Materials necessary for packaging:
• Cold resistant adhesive tape
• Self adhesive label
• Rubber rings
• Pen
Materials to be used for packaging
the foodstuff must be tear-proof and
resistant to cold, humidity, odor, oils and
acids.
Foodstuff to be frozen should not be
allowed to come in contact with the
previously frozen items to prevent their
partial thawing.
You can check the freezing capacity
of your refrigerator from “Technical
A
EN17
6 Cleaning your refrigerator
Warning!!!
Never use gasoline, benzene or
similar substances for cleaning
purposes.
We recommend that you unplug the
appliance before cleaning.
•Never use any sharp abrasive
instrument, soap, household cleaner,
detergent and wax polish for cleaning.
•Use lukewarm water to clean the
cabinet of your refrigerator and wipe it
dry.
•Use a damp cloth wrung out in a
solution of one teaspoon of bicarbonate
of soda to one pint of water to clean the
interior and wipe it dry.
•Make sure that no water enters the
lamp housing and other electrical items.
•If your refrigerator is not going to be
used for a long period of time, unplug
the power cable, remove all food, clean
it and leave the door ajar.
•Vacuum-clean the dusts on your
refrigerator once a year.
•Check door seals regularly to ensure
they are clean and free from food
particles.
•To remove door racks, remove all the
contents and then simply push the door
rack upwards from the base.
•To remove a freezer drawer, pull it as
far as possible, and then tilt it upwards,
and then pull it out completely.
•Especially pay special attention to
prevent the foodstuffs, in particular,
small pieces, such as rice, peas
and beans from running into the fan
protectors and air flow ducts. These
may cause clogging of the cooling
system and a decrease in the efficiency
of the refrigerator.
Protection of plastic surfaces
Do not put the liquid oils or oil-cooked
meals in your refrigerator in unsealed
containers as they damage the plastic
surfaces of your refrigerator. In case of
spilling or smearing oil on the plastic
surfaces, clean and rinse the relevant
part of the surface at once with warm
water.
EN18
7 Service
Things to be done before calling the
authorized service
Please check the following points before
calling the service.
1. Is the refrigerator properly
plugged in?
2. Is the fuse of the socket
which your refrigerator is
connected to or the main
fuse blown out?
3. Are the temperature
adjustments correctly made?
Important note: Protective
thermic of the compressor
will blow out during
sudden power failures
or plug-out plug-ins as
the refrigerant pressure
in the cooling system of
the refrigerator has not
been balanced yet. Your
refrigerator will start
running approximately
after 6 minutes. Please
call the service if your
refrigerator does not
startup at the end of this
period.
EN19
8 Recommended solutions for the problems
Please review this list before calling the service. It might save you time and
money. This list includes frequent complaints that are not arising from defective
workmanship or material usage. Some of the features described here may not exist
in your product.
The refrigerator does not operate
• Is the refrigerator properly plugged in? Insert the plug to the wall socket.
• Is the fuse of the socket which your refrigerator is connected to or the main fuse
blown out? Check the fuse.
Condensation on the side wall of the fridge compartment. (MULTI ZONE, COOL
CONTROL ve FLEXI ZONE)
• Very cold ambient conditions. Frequent opening and closing of the door. Highly
humid ambient conditions. Storage of food containing liquid in open containers.
Leaving the door ajar.
• Switching the thermostat to a colder degree.
• Decreasing the time the door left open or using it less frequently.
• Covering the food stored in open containers with a suitable material.
• Wipe the condensation using a dry cloth and check if it persists.
Compressor is not running
• Protective thermic of the compressor will blow out during sudden power failures or
plug-out plug-ins as the refrigerant pressure in the cooling system of the refrigerator
has not been balanced yet.
• Your refrigerator will start running approximately after 6 minutes. Please call the
service if your refrigerator does not startup at the end of this period.
• The fridge is in defrost cycle. This is normal for a full-automatically defrosting
• Your refrigerator is not plugged into the socket. Make sure that he plug is inserted
tightly to the wall socket.
• Are the temperature adjustments correctly made? There is a power failure. Call
your electricity supplier.
EN20
The fridge is running frequently or for a long time.
• Your new refrigerator may be wider than the previous one. This is quite normal.
Large refrigerators operate for a longer period of time.
• The ambient room temperature may be high.This is quite normal.
• The refrigerator might have been plugged in recently or might have been loaded
with food. Cooling down of the refrigerator completely may last for a couple of
hours longer.
• Large amounts of hot food might have been put in the refrigerator recently. Hot
food causes longer running of the refrigerator until they reach the safe storage
temperature.
• Doors might have been opened frequently or left ajar for a long time. The warm
air that has entered into the refrigerator causes the refrigerator to run for longer
periods. Open the doors less frequently.
• Freezer or fridge compartment door might have been left ajar. Check if the doors
are tightly closed.
• The refrigerator is adjusted to a very low temperature. Adjust the refrigerator
temperature to a warmer degree and wait until the temperature is achieved.
• Door seal of the fridge or freezer may be soiled, worn out, broken or not properly
seated. Clean or replace the seal. Damaged/broken seal causes the refrigerator to
run for a longer period of time in order to maintain the current temperature.
Freezer temperature is very low while the fridge temperature is sufficient.
• The freezer temperature is adjusted to a very low temperature. Adjust the freezer
temperature to a warmer degree and check.
Fridge temperature is very low while the freezer temperature is sufficient.
• The fridge temperature is adjusted to a very low temperature. Adjust the fridge
temperature to a warmer degree and check.
Food kept in the fridge compartment drawers are freezing.
• The fridge temperature is adjusted to a very low temperature. Adjust the fridge
temperature to a warmer degree and check.
Temperature in the fridge or freezer is very high.
• The fridge temperature is adjusted to a very high degree. Fridge adjustment has an
effect on the temperature of the freezer. Change the temperature of the fridge or
freezer until the fridge or freezer temperature reaches to a sufficient level.
• The door might be left ajar. Close the door completely.
• Large amounts of hot food might have been put in the refrigerator recently. Wait
until the fridge or freezer reaches the desired temperature.
• Refrigerator might have been plugged in recently. Cooling down of the refrigerator
completely takes time because of the size.
EN21
Noise similar to the sound of seconds heard from an analog clock is coming from
the refrigerator.
• This noise is coming from the solenoid valve of the refrigerator. Solenoid valve
functions for the purpose of ensuring coolant passage through the compartment
which can be adjusted to cooling or freezing temperatures, and performing cooling
functions. This is normal and is not fault cause.
The operation noise increases when the refrigerator is running.
• The operating performance characteristics o f the refrigerator may change
according to the changes in the ambient temperature. It is normal and not a fault.
Vibrations or noise.
• The floor is not even or it is weak. The refrigerator rocks when moved slowly. Make
sure that the floor is level, strong and capable to carry the refrigerator.
• The noise may be caused by the items put onto the refrigerator. Such items should
be removed from the top of the refrigerator.
There are noises like liquid spilling or spraying.
• Liquid and gas flows happen in accordance with the operating principles of your
refrigerator. It is normal and not a fault.
There is a noise like wind blowing.
• Air activators (fans) are used in order to allow the refrigerator to cool efficiently. It is
normal and not a fault.
Condensation on the inner walls of refrigerator.
• Hot and humid weather increases icing and condensation. It is normal and not a
fault.
• The doors are ajar. Make sure that the doors are closed completely.
• Doors might have been opened very frequently or they might have been left open
for along time. Open the door less frequently.
Humidity occurs on the outside of the refrigerator or between the doors.
• The weather may be humid. This is quite normal in humid weather. When the
humidity is less, condensation will disappear.
Bad odor inside the refrigerator.
• Inside of the refrigerator must be cleaned. Clean the inside of the refrigerator with a
sponge, warm water or carbonated water.
• Some containers or packaging materials might be causing the smell. Use a different
container or different brand packaging material.
The door(s) is (are) not closing.
• Food packages may prevent the door's closing. Replace the packages that are
obstructing the door.
• The refrigerator is probably not completely vertical on the floor and it might be
rocking when slightly moved. Adjust the elevation screws.
• The floor is not level or strong. Make sure that the floor is level and capable to carry
the refrigerator.
Crispers are stuck.
• The food might be touching the ceiling of the drawer. Rearrange food in the drawer.
EN22
Indice
1
Il frigorifero >
2
Avvertenze >3
Avvertenze per la sicurezza......................................................3
Sostituzione della lampadina interna ....................................16
Che cosa fare per risparmiare energia ..................................16
5
Informazioni di congelamento profondo >17
6
Pulizia del frigorifero >18
7
Manutenzione >18
8
IT1
Il frigorifero
1
3
1
5
6
4
17
22
17
20
7
8
7
2
9
18
23
18
10
7
11
12
19
18
13
15
1616
21
14
18
1 Scomparto freezer12 Coperchio scomparto frutta e verdura
2 Scomparto frigo13 Scomparto per bibite o bibite fredde
3 Luce interna scomparto freezer14 Regolazione scomparto per bibite o bibite fredde
4 Icematic 15 Coperchio di ventilazione
5 Scomparto zona fresca 16 Piedini anteriori regolabili
6 Ripiano dello scomparto freezer17 Rastrelliere dello sportello dello scomparto freezer
7 Filtro odori (Carbon):18 Ripiani dello sportello del comparto frigo
8 Mensole in vetro dello scomparto frigo19 Porta bottiglie
9 Portabottiglie regolabile20 Porta uova
10 Luce interna scomparto freezer21 Spia blu
11 Scomparto frutta e verdura secondo piano22 Pannello ed indicatore impostazione temperatura
23 Dispenser d’acqua
• Le illustrazioni contenute in questa guida sono schematiche e potrebbero non corrispondere
esattamente al prodotto in uso. Se le parti in oggetto non sono incluse nel prodotto acquistato,
significa che sono da intendersi per altri modelli.
IT2
Avvertenze
2
Avvertenze per la sicurezza
• Quando si vuole predisporre/raschiare il
prodotto, è consigliabile consultare il servizio
autorizzato per apprendere le informazioni
necessarie e conoscere gli enti autorizzati.
• Non danneggiare il circuito del refrigerante.
• Non utilizzare componenti elettrici all’interno
degli scomparti per la conservazione del cibo,
diversi da quelli consigliati dal produttore.
• Consultare il servizio di manutenzione autorizzato
per tutti i problemi relativi al frigorifero. Non
intervenire o far intervenire sul frigorifero senza
informare il servizio manutenzione autorizzato.
• Non mangiare coni gelati ghiacciati p cubetti
di ghiaccio o gelati appena presi dal freezer!
(possono provocare bruciature da freddo
alla bocca). (Ciò potrebbe causare sintomi di
congelamento in bocca).
• Non mettere bottiglie e lattine di bibite liquide
nello scomparto del freezer. altrimenti potrebbero
esplodere.
• Non toccare con le mani gli alimenti gelati;
possono incollarsi ad esse.
• Il vapore e i materiali per la pulizia vaporizzati non
devono mai essere usati per pulire e scongelare il
frigorifero. In questo caso il vapore può entrare in
contatto con le parti elettriche e provocare corto
circuito o scossa elettrica.
• Non usare mai sul frigorifero parti come piatti o
porte come mezzo di supporto o movimento.
• Non utilizzare dispositivi elettrici all’interno del
frigorifero.
• Non utilizzare frigoriferi danneggiati. Consultare il
servizio assistenza in caso di dubbi.
• Non danneggiare le parti, in cui circola il
refrigerante, con utensili perforanti o taglienti. Il
refrigerante può scoppiare quando i canali del gas
dell’evaporatore, le estensioni dei tubi o le pellicole
superficiali vengono punti e possono provocare
irritazioni alla pelle e lesioni agli occhi.
• Non bloccare o coprire la ventilazione
dell’elettrodomestico.
• Le riparazioni sulle apparecchiature elettriche
possono essere eseguite sono da personale
autorizzato. Le riparazioni eseguite da personale
non competente possono provocare danni
all’utilizzatore.
• In caso di guasto o durante lavori di riparazione
e manutenzione, scollegare la fornitura d’energia
principale o spegnendo il fusibile principale o
scollegando la presa dell’apparecchio.
• Fare attenzione a non tirare dal cavo scollegando
la spina.
• La sicurezza elettrica del frigorifero è garantita
unicamente se il sistema di messa a terra
dell’apparecchiatura è conforme agli standard.
• Non consentire ai bambini di giocare con il
frigorifero. Essi potrebbero arrecare danno a
se stessi e al frigorifero. (non consentire loro di
appendersi alla porta).
• Posizionare le bibite più alte molto vicine e in
verticale.
• Non conservare mai nell’elettrodomestico
sostanze esplosive o prodotti che contengano
gas infiammabili (spray, ecc.), nonché materiali
esplosivi.
• Non utilizzare apparecchiature meccaniche o altri
mezzi diversi da quelli consigliati dal produttore,
per accelerare il processo di sbrinamento.
Sicurezza elettrica
Questo prodotto è progettato per un uso interno.
L’uso esterno non è appropriato anche se coperto
da un tetto.
L’esposizione del prodotto a pioggia, neve, sole e
vento è pericolosa per la sicurezza elettrica.
Se il cavo di alimentazione è danneggiato, il
produttore o il servizio assistenza clienti devono
sostituirlo per evitare danni.
Attenzione: Non collegare mai il frigorifero alla
presa a muro durante l’installazione, per evitare il
rischio di morte o lesioni gravi.
IT3
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge,unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible
for their safety.
Avvertenza HCA
A Se il prodotto è dotato di un
sistema di raffreddamento che
contiene R600a:
Questo gas è infiammabile. Pertanto,
fare attenzione a non danneggiare il
sistema di raffreddamento e le tubazioni
durante l’uso e il trasporto. In caso
di danni, tenere il prodotto lontano da
potenziali fonti di fuoco che possono
provocarne l’incendio e ventilare la
stanza in cui si trova l’unità.
Ignorare l’avvertenza.
Se il prodotto è dotato di un sistema
di raffreddamento che contiene
R134a.
Si può vedere il gas usato nella
produzione del dispositivo sull’etichetta
informativa che si trova nella parte
interna sinistra dello stesso.
Non gettare mai il prodotto nel
fuoco.
IT4
Loading...
+ 63 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.