C Figures in this user manual are schematic and may not correspond exactly to you product. If
the subject parts are not included in the product you have purchased, then it is valid for other
models.
EN
3
2 Important Safety Warnings
Please review the
following information.
Failure to observe this
information may cause
injuries or material
damage. Otherwise, all
warranty and reliability
commitments will become
invalid.
The service life of your
product is 10 years. During
this period, original spare
parts will be available
to operate the product
properly.
Intended use
This product is intended
to be used
• indoors and in closed
areas such as homes;
• in closed working
environments such as
stores and offices;
• in closed
accommodation areas
such as farm houses,
hotels, pensions.
• It should not be used
outdoors.
4
General safety
• When you want to
dispose/scrap the
product, we recommend
you to consult the
authorized service
in order to learn the
required information and
authorized bodies.
• Consult your authorized
service for all your
questions and problems
related to the refrigerator.
Do not intervene or let
someone intervene to
the refrigerator without
notifying the authorised
services.
• For products with a
freezer compartment;
Do not eat cone ice
cream and ice cubes
immediately after you
take them out of the
freezer compartment!
(This may cause frostbite
in your mouth.)
• For products with a
freezer compartment;
Do not put bottled
and canned liquid
beverages in the
freezer compartment.
EN
Otherwise, these may
burst.
• Do not touch frozen food
by hand; they may stick
to your hand.
• Unplug your refrigerator
before cleaning or
defrosting.
• Vapor and vaporized
cleaning materials should
never be used in cleaning
and defrosting processes
of your refrigerator. In
such cases, the vapor
may get in contact with
the electrical parts and
cause short circuit or
electric shock.
• Never use the parts on
your refrigerator such as
the door as a means of
support or step.
• Do not use electrical
devices inside the
refrigerator.
• Do not damage the
parts, where the
refrigerant is circulating,
with drilling or cutting
tools. The refrigerant
that might blow out
when the gas channels
of the evaporator, pipe
extensions or surface
coatings are punctured
causes skin irritations
and eye injuries.
• Do not cover or block
the ventilation holes on
your refrigerator with any
material.
• Electrical devices must
be repaired by only
authorised persons.
Repairs performed by
incompetent persons
create a risk for the user.
• In case of any failure or
during a maintenance or
repair work, disconnect
your refrigerator’s mains
supply by either turning
off the relevant fuse
or unplugging your
appliance.
• Do not pull by the cable
when pulling off the plug.
• Place the beverage with
higher proofs tightly
closed and vertically.
• Never store spray
cans containing
flammable and explosive
substances in the
refrigerator.
EN
5
• Do not use mechanical
devices or other means
to accelerate the
defrosting process,
other than those
recommended by the
manufacturer.
• This product is not
intended to be used by
persons with physical,
sensory or mental
disorders or unlearned
or inexperienced people
(including children) unless
they are attended by
a person who will be
responsible for their
safety or who will instruct
them accordingly for use
of the product
• Do not operate a
damaged refrigerator.
Consult with the service
agent if you have any
concerns.
• Electrical safety of your
refrigerator shall be
guaranteed only if the
earth system in your
house complies with
standards.
• Exposing the product
to rain, snow, sun and
wind is dangerous with
respect to electrical
safety.
• Contact authorized
service when there is a
power cable damage to
avoid danger.
• Never plug the
refrigerator into the wall
outlet during installation.
Otherwise, risk of death
or serious injury may
arise.
• This refrigerator is
intended for only storing
food items. It must not
be used for any other
purpose.
• Label of technical
specifications is located
on the left wall inside the
refrigerator.
• Never connect your
refrigerator to electricitysaving systems; they
may damage the
refrigerator.
• If there is a blue light on
the refrigerator, do not
look at the blue light with
optical tools.
EN
6
• For manually controlled
refrigerators, wait for at
least 5 minutes to start
the refrigerator after
power failure.
• This operation manual
should be handed in to
the new owner of the
product when it is given
to others.
• Water should not be
sprayed on inner or outer
parts of the product for
safety purposes.
• Do not spray substances
containing inflammable
gases such as propane
gas near the refrigerator
to avoid fire and explosion
risk.
• Avoid causing damage
on power cable when
transporting the
refrigerator. Bending
cable may cause fire.
Never place heavy
objects on power cable.
• Do not touch the plug
with wet hands when
plugging the product.
• Do not plug the
refrigerator if the wall
outlet is loose.
• Never place containers
filled with water on top
of the refrigerator; in the
event of spillages, this
may cause electric shock
or fire.
• Do not overload the
refrigerator with food.
If overloaded, the food
items may fall down and
hurt you and damage
refrigerator when you
open the door.
• Never place objects on
top of the refrigerator;
otherwise, these objects
may fall down when
you open or close the
refrigerator's door.
• As they require a precise
temperature, vaccines,
heat-sensitive medicine
and scientific materials
and etc. should not be
kept in the refrigerator.
EN
7
• If not to be used for a
long time, refrigerator
should be unplugged.
A possible problem in
power cable may cause
fire.
• The plug's tip should be
cleaned regularly with a
dry cloth; otherwise, it
may cause fire.
• Refrigerator may move
if adjustable legs are not
properly secured on the
floor. Properly securing
adjustable legs on the
floor can prevent the
refrigerator to move.
• When carrying the
refrigerator, do not hold
it from door handle.
Otherwise, it may be
snapped.
• When you have to place
your product next to
another refrigerator or
freezer, the distance
between devices
should be at least 8cm.
Otherwise, adjacent side
walls may be humidified.
For products with a
water dispenser;
• In order to operate
the water circuit
of the refrigerator
smoothly, the water
mains pressure must
be between 1-8 bars.
For conditions where
water mains pressure
exceeds 5 bars a
pressure regulator
should be used. If the
water mains pressure
exceeds 8 bars then
the refrigerator’s water
circuit should not be
connected to the water
mains. If you lack the
knowledge of how to
measure the water
mains pressure, please
seek a professional
support.Use drinking
water only.
• Use only potable water.
Child safety
• If the door has a lock, the key should be
kept away from reach of children.
• Children must be supervised to prevent
them from tampering with the product.
EN
8
Compliance with WEEE
Directive and Disposing of
the Waste Product:
This product complies with
EU WEEE Directive (2012/19/
EU). This product bears a
classification symbol for
waste electrical and electronic
equipment (WEEE).
This product has been
manufactured with high quality parts and
materials which can be reused and are
suitable for recycling. Therefore, do not
dispose the product with normal domestic
waste at the end of its service life. Take
it to a collection point for the recycling of
electrical and electronic equipment. Please
consult your local authorities to learn the
nearest collection point. Help protect the
environment and natural resources by
recycling used products. For children's
safety, cut the power cable and break the
locking mechanism of the door, if any, so
that it will be non-functional before disposing
of the product.
Package information
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our National
Environment Regulations. Do not dispose
of the packaging materials together with
the domestic or other wastes. Take them
to the packaging material collection points
designated by the local authorities.
Do not forget...
Any recycled substance is an indispensable
matter for nature and our national asset
wealth.
If you want to contribute to the reevaluation of the packaging materials,
you can consult to your environmentalist
organizations or the municipalities where
you are located.
HC warning
If your product's cooling system
contains R600a:
This gas is flammable. Therefore, pay
attention to not damaging the cooling
system and piping during usage and
transportation. In the event of damage,
keep your product away from potential fire
sources that can cause the product catch a
fire and ventilate the room in which the unit
is placed.
Ignore this warning if your product's
cooling system contains R134a.
Type of gas used in the product is stated in
the type label which is on the left wall inside
the refrigerator.
Never throw the product in fire for disposal.
Things to be done for
energy saving
• Do not leave the doors of your refrigerator
open for a long time.
• Do not put hot food or drinks in your
refrigerator.
• Do not overload your refrigerator so
that the air circulation inside of it is not
prevented.
• Do not install your refrigerator under direct
sunlight or near heat emitting appliances
such as ovens, dishwashers or radiators.
Keep your refrigerator at least 30cm away
from heat emitting sources and at least
5cm from electrical ovens.
• Pay attention to keep your food in closed
containers.
EN
9
Recommendations for the
MILK
juiceetc.
temperature
sensor
fresh food compartment
*optional
•Donotallowthefoodtotouch
the temperature sensor in fresh food
compartment. To allow the fresh food
compartment keep its ideal storage
temperature, sensor must not be hindered
by food.
•Donotplacehotfoodsintheproduct.
MILK
juice
etc.
temperature
sensor
• For products with a freezer compartment;
You can store maximum amount of
food items in the freezer when you
remove the shelf or drawer of the freezer.
Energy consumption value stated for
your refrigerator has been determined
by removing freezer shelf or drawer and
under maximum load. There is no harm
to use a shelf or drawer according to the
shapes and size of food to be frozen.
• Thawing frozen food in fridge
compartment will both provide energy
saving and preserve the food quality.
food
temperature
sensor
10
EN
3 Installation
B In case the information which are given
in the user manual are not taken into
account, manufacturer will not assume
any liability for this.
Points to be paid attention
to when the relocation of the
refrigerator
1. Your refrigerator should be unplugged.
Before transportation of your refrigerator, it
should be emptied and cleaned.
2. Before it is re-packaged, shelves,
accessories, crisper, etc. inside your
refrigerator should be fixed with adhesive tape
and secured against impacts. Package should
be bound with a thick tape or sound ropes
and the transportation rules on the package
should be strictly observed.
3. Original packaging and foam materials
should be kept for future transportations or
moving.
Before you start the
refrigerator,
Check the following before you start to
use your refrigerator:
1. Attach 2 plastic wedges as illustrated
below. Plastic wedges are intended to
keep the distance which will ensure the
air circulation between your refrigerator
and the wall. (The picture is drawn up as a
representation and it is not identical with your
product.)
2. Clean the interior of the refrigerator as
recommended in the “Maintenance and
cleaning” section.
3. Connect the plug of the refrigerator to the
wall socket. When the fridge door is opened,
fridge internal lamp will turn on.
4. When the compressor starts to operate,
a sound will be heard. The liquid and gases
sealed within the refrigeration system may also
give rise to noise, even if the compressor is
not running and this is quite normal.
5. Front edges of the refrigerator may feel
warm. This is normal. These areas are
designed to be warm to avoid condensation.
Electrical connection
Connect your product to a grounded
socket which is being protected by a fuse
with the appropriate capacity.
Important:
The connection must be in compliance
with national regulations.
• The power plug must be easily accessible
after installation.
• Electrical safety of your refrigerator shall be
guaranteed only if the earth system in your
house complies with standards.
• The voltage stated on the label located at
left inner side of your product should be
equal to your network voltage.
11
EN
• Extension cables and multi plugs
must not be used for connection.
B A damaged power cable must be
replaced by a qualified electrician.
B Product must not be operated before it is
repaired! There is the risk of electric shock!
Disposing of the packaging
The packing materials may be dangerous
for children. Keep the packing materials out
of the reach of children or dispose of them
by classifying them in accordance with
the waste instructions stated by your local
authorities. Do not throw away with regular
house waste, throw away on packaging
pick up spots designated by the local
authorities.
The packing of your refrigerator is
produced from recyclable materials.
Disposing of your old
refrigerator
Dispose of your old refrigerator without
giving any harm to the environment.
• You may consult your authorized dealer
or waste collection center of your
municipality about the disposal of your
refrigerator.
Before disposing of your refrigerator, cut
out the electric plug and, if there are any
locks on the door, make them inoperable in
order to protect children against any danger.
Placing and Installation
A
If the entrance door of the room where
the refrigerator will be installed is not wide
enough for the refrigerator to pass through,
then call the authorized service to have
them remove the doors of your refrigerator
and pass it sideways through the door.
1. Install your refrigerator to a place that
allows ease of use.
2. Keep your refrigerator away from heat
sources, humid places and direct sunlight.
3. There must be appropriate air ventilation
around your refrigerator in order to achieve
an efficient operation. If the refrigerator is to
be placed in a recess in the wall, there must
be at least 5 cm distance with the ceiling
and at least 5 cm with the wall. Do not place
your product on the materials such as rug or
carpet.
4. Place your refrigerator on an even floor
surface to prevent jolts.
12
EN
Adjusting the legs
If your refrigerator is unbalanced;
You can balance your refrigerator by
turning its front legs as illustrated in the
figure. The corner where the leg exists is
lowered when you turn in the direction of
black arrow and raised when you turn in
the opposite direction. Taking help from
someone to slightly lift the refrigerator will
facilitate this process.
Changing the illumination
lamp
To change the Bulb/LED used for
illumination of your refrigerator, call your
Authorized Service.
The lamp(s) used in this appliance is not
suitable for household room illumination.
The intended purpose of this lamp is to
assist the user to place foodstuffs in the
refrigerator/freezer in a safe and comfortable
way.
Door Open Warning
(This feature is optional)
An audio warning signal will be given when
the door of your product is left open for at
least 1 minute. This warning will be muted
when the door is closed or any of the display
buttons (if any) are pressed.
13
EN
4 Preparation
• Your cooler/freezer should be installed at
least 30 cm away from heat sources such
as hobs, ovens, central heater and stoves
and at least 5 cm away from electrical
ovens and should not be located under
direct sunlight.
• Please make sure that the interior of your
cooler/freezer is cleaned thoroughly.
• If two coolers are to be installed side
by side, there should be at least 2 cm
distance between them.
• When you operate your cooler/freezer for
the first time, please observe the following
instructions during the initial six hours.
• Its door should not be opened frequently.
• It must be operated empty without placing
any food in it.
• Do not unplug your cooler/freezer.
If a power failure occurs out of your
control, please see the warnings in
the “Recommended solutions for the
problems” section.
• This product has been designed to
function at ambient temperatures up to
43 °C (90 SDgrF). Even if the ambient
temperature falls to -15 °C, frozen food
in the freezer does not thaw thanks to its
Advanced Electronic Temperature Control
System. For the first installation, the
product should NOT be placed under low
ambient temperatures. This is because
the freezer cannot go down to standard
operation temperature. When reaching
continuous operation, the product can be
moved to another place. Thus, later you
can place your product in the garage or
an unheated room without the concern
of causing frozen food to get rotten.
However, it is likely that above mentioned
low temperatures may cause the freezing
of the food in the fridge compartment;
thus, please consume the food items in
the fridge in a controlled way as needed.
When ambient temperature goes back to
normal, you may change button setting
according to your need.
• If the ambient temperature is below 0°C,
the food in fridge compartment will freeze.
Therefore, we recommend not using the
fridge compartment in such low ambient
temperatures. You may continue to use
the freezer compartment as usual.
14
EN
5 Using your refrigerator
Indicator Panel
Indicator panels may vary depending on your product's model.
The Indicator panel aids in using your refrigerator with its audio and visual functions.
(in some models)
173
45*62
1. Freezer Compartment Temperature
Setting Indicator
2. Freezer Compartment Temperature
Setting Button
3. Fridge Compartment Temperature
Setting Indicator
4. Fridge Compartment Temperature
Setting Button
5. Economy Mode Indicator
6. Ionizer Indicator
7. Error Status Indicator
*optional
C Figures in this user manual are schematic and may not correspond exactly to you
product. If the subject parts are not included in the product you have purchased, then
it is valid for other models.
EN
15
1. Freezer Compartment Temperature
Setting Indicator
Indicates the temperature set for freezer
compartment.
2. Freezer Compartment Temperature
Setting Button
Press this button to set the temperature of
the freezer compartment to -18, -20, -22,
-24, -18... respectively. Press this button to
set the desired temperature for the freezer
compartment.
3. Fridge Compartment Temperature
Setting Indicator
Indicates the temperature set for Fridge
compartment.
4. Fridge Compartment Temperature
Setting Button
Press this button to set the temperature
of the fridge compartment to 8, 6, 4, 2,
8... respectively. Press this button to set
the desired temperature for the fridge
compartment.
5. Economy Mode Indicator
Indicates that the refrigerator is running in
energy-efficient mode.
6- Ionizer Indicator
Indicator light lights up continuously.
This light indicates that your refrigerator is
protected against the bacteria.
7. Error Status Indicator
If your refrigerator does not cool
adequately or if there is a sensor failure,
this indicator will be activated. When this
indicator is active, Freezer Compartment
Temperature indicator will display "e" and
Fridge Compartment Temperature Indicator
will display numbers such as "1,2,3…".
These numbers on the indicator provide
information about the error to the service
personnel.
16
EN
15
14
13
12
1
11
10
9
8*
7
1. Freezer Compartment Temperature
Setting Button
2. Fridge Compartment Temperature Setting
Button
3. Error Status Indicator
4. Key Lock indicator
5. Eco Extra Function Indicator
6. Eco Extra / Vacation Button
7. Vacation Function Indicator
8. Icematic Off Indicator (*in some models)
6
9. Economic Usage Indicator
10. Quick Fridge Function Indicator
11. Quick Fridge Function Button
12. Fridge Compartment Temperature Setting
Indicator
13. Quick Freeze Function Button Icematic
On-Off Button (3")
14. Freezer Compartment Temperature
Setting Indicator
15. Quick Freeze Function Indicator
*optional
2
3
4
5
C Figures in this user manual are schematic and may not correspond exactly to you product. If
the subject parts are not included in the product you have purchased, then it is valid for other
models.
17
EN
1. Freezer Compartment Temperature
Setting Button
This function allows you to set the
temperature of freezer compartment. Press
this button to set the temperature of the
freezer compartment to -18, -19, -20, -21
-22, -23 and -24, respectively.
2. Fridge Compartment Temperature
Setting Button
function allows you to set the fridge
compartment’s temperature. Press this
button to set the temperature of the fridge
compartment to 8, 7, 6, 5, 4, 3, 2 degrees,
respectively.
3. Error Status Indicator
If your refrigerator does not cool
adequately or if there is a sensor failure,
this indicator will be activated. When this
indicator is active, Freezer Compartment
Temperature indicator will display "E" and
Fridge Compartment Temperature Indicator
will display numbers such as "1,2,3…".
These numbers on the indicator provide
information about the error to the service
personnel.
When you place hot food into the freezer
compartment or if you leave the door open
for a long time, exclamation mark can
illuminate for some time. This is not a failure;
this warning will disappear when the food
cools down.
4. Key Lock Indicator
Use this function if you do not want your
refrigerator temperature setting changed.
Press Fridge compartment temperature
setting button and Freezer compartment
temperature setting button simultaneously
for a long time (3 sec) to activate this
function.
5. Eco Extra Function Indicator
It indicates that the Eco-Extra function is
active.
If this function is active, your refrigerator
will automatically detect the least usage
periods and energy-efficient cooling will be
performed during those times. Economy
indicator will be active while energy-efficient
cooling is performed.
Press the relevant button again to
deactivate this function.
6. Eco Extra/Vacation Button
Press this button briefly to activate the Eco
Extra function. Press and hold this button
for 3 sec. to activate the Vacation function.
Press this button again to deactivate the
selected function.
7. Vacation Function Indicator
Indicates that the vacation function is
active. If this function is active, "- -" appears
on the indicator of the fridge compartment
and no cooling is performed in the fridge
compartment. Other compartments will
continue to be cooled in accordance with
the temperature set for them.
Press the relevant button again to
deactivate this function.
8. Icematic Off Indicator
Icematic will not run when the indicator of
this function is active.
To activate the ice off function, you need
to press and hold the quick freeze button
for 3 seconds.
9. Economic Usage Indicator
Indicates that the refrigerator is running
in energy-efficient mode. This indicator
will be active if the Freezer Compartment
temperature is set to -18 or the energy
efficient cooling is being performed due to
Eco-Extra function.
10. Quick Fridge Function Indicator
This symbol flashes in an animated style
when the Quick Fridge function is active.
11. Quick Fridge Function Button
When you press the Quick Fridge button,
the temperature of the compartment will be
colder than the adjusted values.
This function can be used for food placed
in the fridge compartment and required to
be cooled down rapidly.
If you want to cool large amounts of fresh
food, it is recommended to activate this
feature before putting the food into the
fridge.
Quick Fridge indicator turns on when the
Quick Fridge function is on. To cancel this
function, press Quick Fridge button again.
18
EN
If you do not cancel it, Quick Fridge will
cancel itself automatically after 4 hours or
when the fridge compartment reaches to
the required temperature.
This function is not recalled when power
restores after a power failure.
12. Fridge Compartment Temperature
Setting Indicator
Indicates the temperature set for the
Fridge Compartment.
13. Quick Freeze Function Button
Icematic On-Off Button (3")
Indicates the temperature set for the
Freezer Compartment.
To stop ice formation, press Icematic onoff button for 3 seconds. Water flow from
water tank will stop when this function is
selected. However, ice made previously can
be taken from the Icematic. To restart ice
formation, press Icematic on-off button for
3 seconds.
14. Freezer Compartment Temperature
Setting Indicator
Fast Freeze indicator turns on when the
Fast Freeze function is active. To cancel
this function, press Fast Freeze button
again. Quick Freeze indicator will turn off
and return to its normal settings. If you
do not cancel it, Fast Freeze will cancel
itself automatically after 8 hours or when
the freezer compartment reaches to the
required temperature.
If you want to freeze large amounts of
fresh food, press the Fast Freeze button
before putting the food into the freezer
compartment.
If you press the Fast Freeze button
repeatedly with short intervals, the electronic
circuit protection will be activated and the
compressor will not start up immediately.
This function is not recalled when power
restores after a power failure.
15. Quick Freeze Function Indicator
This symbol flashes in an animated style
when the Fast Freeze function is active.
19
EN
4
3
13
15
7
17
*8
14
12
1. Freezer Compartment Temperature
Setting Indicator
2. Freezer Compartment Temperature
Setting Function
3. Quick Freeze Function Button Icematic
On-Off Button (3")
4. Quick Freeze Function Indicator
5. Fridge Compartment Temperature Setting
Indicator
6. Fridge Compartment Temperature Setting
Function
7. Quick Fridge Function Button
8. Icematic Off Indicator (*in some models)
9. Eco-Fuzzy (Special Economic Usage)
Function
10. Eco-Fuzzy (Special Economic Usage)
Indicator
11. Vacation Function
12. Vacation Function Indicator
13. Energy Efficiency Function
14. Energy Efficiency Indicator
15. Key Lock Function
16. Key Lock indicator
17. Economic Usage Indicator
18. High Temperature/Error Warning Indicator
19. Ice Cream Mode Selection Function
20. Ice Cream Mode Selection Indicator
21. Ice Cream Indicator
22. Quick Fridge Indicator
*optional
2
1
20
19
6
5
22
18
16
21
10
11
9
C Figures in this user manual are schematic and may not correspond exactly to you product. If
the subject parts are not included in the product you have purchased, then it is valid for other
models.
20
EN
1. Freezer Compartment Temperature
Indicator
Indicates the temperature set for Freezer
Compartment.
2.Freezer Compartment Temperature
Setting Function
This function allows you to set the
temperature of freezer compartment. Press
this button to set the temperature of the
freezer compartment to -18, -19, -20, -21
-22, -23 and -24, respectively.
3. Quick Freeze Function Button
Icematic On-Off Button (3”)
Quick Freeze indicator is illuminated when
the Quick Freeze function is active. To
cancel this function, press Quick Freeze
button again. Quick Freeze indicator will
turn off and return to its normal settings.
If you do not cancel it, Quick Freeze will
cancel itself automatically after 4 hours or
when the freezer compartment reaches
the required temperature. If you want to
freeze large amounts of fresh food, press
the Quick Freeze button before putting the
food into the freezer compartment. If you
press the Quick Freeze button repeatedly
with short intervals, the electronic circuit
protection will be activated and the
compressor will not start up immediately.
This function is not recalled when power
restores after a power failure!
4. Quick Freeze Function Indicator
This symbol flashes in an animated style
when the Quick Freeze function is active.
5. Fridge Compartment Temperature
Setting Indicator
Indicates the temperature set for the
Fridge Compartment.
When you press the Quick Fridge button,
the temperature of the compartment will
be colder than the adjusted values. This
function can be used for food required
to be cooled down rapidly in the fridge
compartment. If you want to cool large
amounts of fresh food, it is recommended
to activate this function before putting the
food into the fridge. Quick Fridge indicator is
illuminated when the Quick Fridge function
is active. To cancel this function, press Quick
Fridge button again. Quick Fridge indicator
will turn off and return to its normal settings.
If you do not cancel it, Quick Fridge function
will cancel itself automatically after 2 hours
or when the fridge compartment reaches
the required temperature.
This function is not recalled when power
restores after a power failure.
8. Icematic Off Indicator
Icematic will not run when the indicator of
this function is active.
To activate the ice off function, you need
to press and hold the quick freeze button
for 3 seconds.
9. Eco-Fuzzy (Special Economic
Usage) Function
When you press Eco-Fuzzy button, Eco
Fuzzy Function will be activated and EcoFuzzy Indicator will illuminate. Refrigerator
will start operating in the most economic
mode at least 6 hours later and the
economic usage indicator will turn on when
the function is active. To deactivate the Eco
Fuzzy function, You need to press on the
Eco-Fuzzy button again.
6. Fridge Compartment Temperature
Setting Function
function allows you to set the fridge
compartment’s temperature. Press this
button to set the temperature of the fridge
21
10. Eco-Fuzzy (Special Economic
Usage) Indicator
This symbol illuminates when the Eco-
Fuzzy Function is active.
EN
11. Vacation Function
Press and hold Eco Fuzzy button for 3
seconds to activate Vacation Function and
illuminate Vacation Indicator. The cooling
of Fridge Compartment is stopped and
temperature of Fridge Compartment is fixed
to 15 degrees to prevent bad odors. When
this function is active, Fridge Compartment
Temperature Indicator will not display
the temperature. To deactivate Vacation
Function, press and hold Eco-Fuzzy button
for 3 seconds.
12. Vacation Function Indicator
This indicator illuminates when Vacation
Function is active.
13. Energy Saving Function
When you press Energy Efficiency button,
Energy Efficiency Function will be activated
and Energy Efficiency Indicator will illuminate.
When Energy Efficiency Function is active,
all indicators, except for Energy Efficiency
Indicator, will turn off. This function will be
deactivated when any button is pressed
or door is opened; display indicators will
return normal settings and Energy Efficiency
Indicator will stay illuminated. If you do not
press any button or open the door within 5
minutes when Energy Efficiency Indicator is
still illuminated, Energy Efficiency Function
will be activated again and display indicators
will turn off. If you press Energy Efficiency
button when the function is not active but
the indicator is still illuminated, this will
deactivate Energy Efficiency function and
turn off Energy Efficiency Indicator.
14. Energy Saving Indicator
This indicator illuminates when Energy
Efficiency Function is selected.
15. Key Lock Function
When you press and hold Key Lock
button for 3 seconds, Key Lock Function
will be activated and Key Lock Indicator will
illuminate. No button will operate when this
function is active. Press and hold Key Lock
button for 3 seconds again to deactivate
this function.
16. Key Lock Indicator
This indicator will illuminate when Key
Lock Function is active.
17. Economic Usage Indicator
Economic Usage Indicator turns on when
the Freezer Compartment is set to -18°C.
When Quick Freeze or Quick Fridge is
selected, Economic Usage Indicator will not
illuminate.
18. High Temperature/Error Warning
Indicator
This light illuminates during high
temperature failures and error warnings.
19. Ice Cream Mode Selection
Function
When the Ice Cream button is pressed for
3 seconds; it will flash.
If this button is not pressed again in 30
seconds, display will return to its previous
view, Ice Cream mode selection indicators
will turn off.
With every short press of the Ice Cream
button, the number will increase by one.
When the Ice Cream button is pressed
again for 3 seconds, Ice Cream symbol
on the display will turn on again. Thus, Ice
Cream mode is selected and the number
will turn on solid while the symbols on the
left side will illuminate with animations.
When the Ice Cream process is completed,
the symbols start to flash and an audio
warning is given. All Ice Cream symbols will
turn off after this 5-minute warning.
Just press the Ice Cream button briefly
to terminate the audio warning; Ice Cream
buttons will turn off too.
If the Ice Cream button is pressed briefly
when the Ice Cream process is in progress,
no change will take place on the display.
22
EN
When the Ice Cream Function is active,
if a power cut occurs and then power is
resumed again, Ice Cream process will be
maintained from where it is interrupted.
If the Ice Cream function is tried to be
activated when the freezer compartment is
at a temperature higher than -10 °C, ‘E’ and
the warning symbol on the display will flash
for 30 seconds. If the user presses the Ice
Cream function selection button briefly (for
3 seconds), display will return to its normal
Ice Cream view, Ice Cream symbol and
warning symbol will turn off.
20. Ice Cream Mode Selection
Function
It shows the set Ice Cream mode.
21. Ice Cream Indicator
It turns on when the Ice Cream mode is
activated.
22. Quick Fridge Indicator
This symbol flashes in an animated style
when the Quick Fridge function is active.
23
EN
*Optional
Dual cooling system
Your refrigerator is equipped with two
separate cooling systems to cool the
fresh food compartment and freezer
compartment. Thus, air in the fresh food
compartment and freezer compartment
do not get mixed. Thanks to these two
separate cooling systems, cooling speed is
much higher than other refrigerators. Odors
in the compartments do not get mixed.
Also additional power saving is provided
since the automatic defrosting is performed
individually.
Temperature setting button
Temperature Setting button allows you
to make the temperature setting of your
refrigerator.
Setting the temperature of
your refrigerator
The overall temperature setting of your
refrigerator is made by means of the
temperature setting button on the right wall
of the fridge compartment. This button has
5 different temperature setting position.
Select the position suitable to your needs.
Level number 1 shows when the fridge is
at its hottest and the max position shows its
coldest setting.
•Hotfoodmustcooldowntotheroom
temperature before putting them in the
refrigerator.
•Thefoodstuffthatyouwanttofreeze
must be fresh and in good quality.
•Foodstuffmustbedividedintoportions
according to the family’s daily or meal
based consumption needs.
•Foodstuffmustbepackagedinan
airtight manner to prevent them from
drying even if they are going to be kept for
a short time.
•Materialstobeusedforpackagings
must be resistant to cold and humidity
and they must be airtight. The packaging
material of the food must be at a sufficient
thickness and durability. Otherwise the
food hardened due to freezing may
puncture the packaging. It is important for
the packaging to be closed securely for
safe storage of the food.
C Figures in this user manual are schematic and may not correspond exactly to you product. If
the subject parts are not included in the product you have purchased, then it is valid for other
models.
EN
24
•Frozenfoodmustbeusedimmediately
after they are thawed and they should
never be re-frozen.
•Pleaseobservethefollowinginstructions
to obtain the best results.
1. If the fridge has a quick freeze function,
activate the quick freeze function when
you want to freeze the food.
2. Do not freeze too large quantities of
food at one time. The quality of the food
is best preserved when it is frozen right
through to the core as quickly as possible.
3. Take special care not to mix already
frozen food and fresh food.
4. Make sure raw foods are not in contact
with cooked foods in the fridge.
F r e e z e r
Compartment
Setting
-18°C4°CThis is the normal recommended setting.
-20, -22 or
-24°C
Quick Freeze 4°C
-18°C or colder2°C
-18°C or colderQuick Fridge
Recommendations for
preservation of frozen food
•Pre-packedcommerciallyfrozenfood
should be stored in accordance with the
frozen food manufacturer's instructions in
a frozen food storage compartment.
•Toensurethatthehighqualitysupplied
by the frozen food manufacturer and the
food retailer is maintained, following points
should be noted:
1.Put packages in the freezer as quickly as
possible after purchase.
2.Ensure that contents of the package are
labeled and dated.
F r i d g e
Compartment
Setting
4°C
Remarks
These settings are recommended when the
ambient temperature exceeds 30°C.
Use when you wish to freeze your food in a short
time. If is recommended to be used to maintain the
quality of meat and fish products.
If you think that your fridge compartment is not
cold enough because of the hot conditions or
frequent opening and closing of the door.
You can use it when your fridge compartment is
overloaded or if you wish to cool down your food
rapidly. It is recommended that you activate the
quick freeze function 4-8 hours before placing the
food.
3. Do not exceed "Use By", "Best Before"
dates on the packaging.
Defrosting
The freezer compartment defrosts
automatically.
Placing the food
Freezer
compartment
shelves
Egg sectionEgg
Various frozen food
such as meat, fish, ice
cream, vegetables and
etc.
25
EN
Fridge
compartment
shelves
Food in pans,
covered plates and
closed containers
partial thawing. Thawed out food must
be consumed and must not be frozen again.
Door shelves
of fridge
compartment
CrisperVegetables and fruits
Freshzone
compartment
Small and packaged
food and drinks (such
as milk, fruit juice and
beer)
Delicatessen
products (cheese,
butter, salami and etc.)
Deep-freeze information
Food must be frozen as rapidly as possible
when they are put in the freezer in order to
keep them in good quality.
It is possible to preserve the food for a long
time only at -18°C or lower temperatures.
You can keep the freshness of food
for many months (at -18°C or lower
temperatures in the deep freeze).
WARNING! A
•Foodstuffmustbedividedintoportions
according to the family’s daily or meal based
consumption needs.
• Foodstuff must be packaged in an
airtight manner to prevent them from drying
even if they are going to be kept for a short
time.
Materials necessary for packaging:
•Coldresistantadhesivetape
•Self-adhesivelabel
•Rubberrings
•Pen
Materials to be used for packaging the
foodstuff must be tear-proof and resistant
to cold, humidity, dour, oils and acids.
Foodstuff to be frozen should not be
allowed to come in contact with the
previously frozen items to prevent their
Egg section
You can place the egg section in any of the
door shelves. If it is going to be placed in the
body, the lower shelves are recommended
due them being cooler.
Never store eggs in the freezer
compartment.
Avoid direct contact between eggs and
other foods.
26
EN
Description and cleaning of
odor filter:
*optional
Odor filter prevents unpleasant odor build-
up in your refrigerator.
Pull the cover into which the odor filter is
installed downwards from the front section
and remove as illustrated. Leave the filter
under sunlight for one day. Filter will be
cleaned during this time. Install the filter
back to its place.
Odor filter must be cleaned once in a year.
Breakfast Compartment
Because products such as fish, red
meat, chicken mean, and dairy products
such as cheese, yoghurt and milk need
to be kept in an ambient a few degrees
cooler than the fridge compartment, it
is recommended to store these goods
in the breakfast compartment. It is not
recommended to place fruit and vegetables
in the breakfast compartment. Especially
tomatoes, eggplants, zucchinis, cucumbers
and lemons are sensitive to the cold. They
should not be stored in the breakfast
compartment.
You can increase the inner volume of
your refrigerator by removing the breakfast
compartment.
1. Pull the compartment towards yourself
until it rests and stops against the stopper.
2. Lift the front section and pull towards
yourself to remove the compartment from
its seating.
27
EN
Water Dispenser
*optional
Water dispenser is a very useful feature
based on reaching cold water without
opening the door of your refrigerator. As you
will not have to open your refrigerator door
frequently, you will have saved energy.
Using the water dispenser
Push the arm of the water dispenser
with your glass. The dispenser will cease
operating once you release the arm.
When operating the water dispenser,
maximum flow can be obtained by pressing
the arm fully. Please remember that the
amount of flow from the dispenser is subject
to the degree you press the arm.
As the level of the water in your glass/
container rises, slightly lessen the pressure
on the arm to prevent the overspill. If you
slightly press the arm, the water will drip;
this is quite normal and not a failure.
Filling the water dispenser's tank
Water tank filling reservoir is located inside
the door rack. You can open the reservoir
cover and fill it with potable water. And then,
close the lid.
Warning!
• Donotfillthewatertankwithanyliquid
other than water, such as fruit juices,
milk, carbonated beverages or alcoholic
drinks which are not suitable to use in
the water dispenser. Water dispenser will
be irreparably damaged if these kinds of
liquids are used. Warranty does not cover
such usages. Some chemical substances
and additives contained in these kinds of
drinks/liquids may damage the water tank
and its materials.
28
EN
• Usecleandrinkingwateronly.
• Capacityofthewatertankis3liters;do
not overfill.
• Pushthearmofthewaterdispenserwith
a rigid glass. If you are using disposable
plastic glasses, push the arm with your
fingers from behind the glass.
Cleaning the water tank
• Removethewaterfillingreservoirinside
the door rack.
• Removethedoorrackbyholdingfrom
both sides.
• Grabthewatertankfrombothsidesand
remove it with an angle of 45°C.
• Cleanthewatertankbyremovingitslid.
Important:
Components of the water tank and
water dispenser should not be washed in
dishwasher.
29
EN
Loading...
+ 320 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.