Beko DIN15320, DIN15X20, DIN15R20, DIN15321 User Manual
Dishwasher
User’s Manual
Dishwasher
User’s Manual
DIN15320
DIN15X20
DIN15R20
DIN15321
18 7556 0100_AA_BEKO_E10_EN/ 12-02-20.(16:01)
EN
Please read these instructions first before using your appliance
Thank you for choosing a Beko appliance.
Please take some time to read this user manual before using your appliance, to ensure
you know how to safely operate the controls and functions.
Carefully follow all unpacking and installation instructions to ensure the appliance is
correctly connected and fitted prior to use.
Please write your product model and serial number on the last page of this user manual,
and store in a safe location close to the appliance for easy future reference.
This user manual may also be applicable for several other models. Differences between
models will be listed.
If you have any questions or concerns, please call our contact centre or find help and
information online at www.beko.co.uk
Explanation of symbols
Throughout this User Manual the following symbols are used:
Important information or useful
C
A
hints about usage.
Warning for hazardous situations
with regard to life and property.
Warning for electric shock.
B
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes.
Take them to the packaging material collection points designated by the local authorities.
CONTENTS
1 INSTRUCTIONS FOR SAFETY
AND ENVIRONMENT 4
General safety .......................................4
Intended use ..........................................4
Children’s safety .................................... 5
Disposing of packaging material ........5
Transportation of the product ............5
Compliance with WEEE Directive and
Disposing of the Waste Product .........6
Compliance with RoHS Directive ........6
Package information ............................6
2 DISHWASHER 7
Overview ................................................7
Fan drying system .................................8
Technical specications .......................8
3 INSTALLATION 9
Appropriate installation location .......9
Connecting water supply .....................9
Connection to the drain .................... 10
Adjusting the feet .............................. 10
Electrical connection ......................... 10
This appliance must be earthed .......11
Fitting a dierent plug .......................11
Initial use ..............................................11
4 PREPARATION 12
Tips for energy saving ........................ 12
Water softening system ....................12
Adjusting the water softening
system ..................................................12
Adding salt ...........................................14
Detergent ............................................. 15
Tablet detergents ...............................16
Rinse aid ...............................................17
Items not suitable for washing in the
dishwasher ...........................................17
Placing the dishes into the
dishwasher .......................................... 18
Cutlery basket .................................... 20
Upper basket height adjustable
rack ....................................................... 20
Upper basket multipurpose service
rack ....................................................... 20
Collapsible upper basket wires .........21
Collapsible lower basket tines ..........21
Adjusting the height of the upper
basket .................................................. 22
5 OPERATING THE PRODUCT 23
On/O key ........................................... 24
Programme Selection / Programme
Cancel key ............................................ 24
Function Keys ..................................... 24
Preparing the machine...................... 24
Programme selection ........................ 24
Auxiliary functions ............................ 26
Programming the washing time .......27
Starting the programme ................... 28
Cancelling the programme ............... 28
Salt Indicator ( ) ............................. 28
Rinse Aid Indicator ( ) ..................... 28
Adjusting the amount of rinse aid ... 29
End of programme ............................. 29
Water Cut-o Warning ...................... 29
Overowing Warning ........................ 29
6 MAINTENANCE AND
CLEANING 30
Cleaning the outer surface of the
product ................................................ 30
Cleaning the interior of the machine 30
Cleaning the lters ............................ 30
Cleaning the hose lter ......................31
Cleaning the impellers ...................... 32
Lower impeller .................................... 32
Upper impeller ................................... 32
7 TROUBLESHOOTING 33
8 GUARANTEE 38
Instructions for safety and envIronment
1
This section contains safety
instructions that will help to give
protection from risk of personal
injury or property damage. Failure
to follow these instructions shall
void all warranties.
General safety
• Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will
cause electrical parts to
overheat. This will cause
problems with your product.
• Do not operate the product
if the power cable / plug is
damaged! Call the Authorised
Service Agent.
• Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation made
by a qualified electrician.
Our company shall not be
liable for any damages that
will arise when the product
is used without grounding
in accordance with the local
regulations.
• The water supply and
draining hoses must be
securely fastened and remain
undamaged.
• Unplug the product when not
in use.
• Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!
• Never touch the plug with
wet hands! Never unplug by
pulling on the cable, always
pull out by grabbing the plug.
• The product must be
unplugged during installation,
maintenance, cleaning and
repairing procedures.
• Always have the repair
procedures carried out by the
Authorised Service Agent.
Manufacturer shall not be
held liable for damages that
may arise from procedures
carried out by unauthorised
persons.
• Never use chemical solvents
in the product. They bring
forth the risk of explosion.
• When you pull the upper and
lower baskets out completely,
the door of the product will
bear all the weight of the
baskets. Do not put other
loads on the door; otherwise,
the product may tilt.
• Never leave the door of
the product open apart
from loading and unloading
procedures.
• Do not to open the door of
the product when it is running
unless necessary. Be careful
for the rush of hot steam
when you need to open the
door.
Intended use
• This product has been
designed for domestic use.
• It must be used to do the
domestic type dishes only.
4
/42 EN
Dishwasher / User’s Manual
Instructions for safety and envIronment
• This appliance is intended
to be used in household and
similar applications such as:
- Staff kitchen areas in shops,
offices and other working
environments.
• Only dishwasher safe
detergents, rinse aids and
additives must be used.
• The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical,sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be
made by children without
supervision.
Children’s safety
• Electrical products are
dangerous for the children.
Keep children away from the
product when it is in use. Do
not let them to tamper with
the product.
• Do not forget to close the
door of the product when
leaving the room where it is
located.
• Store all detergents and
additives in a safe place away
from the reach of the children.
Disposing of packaging
material
Packaging materials are
dangerous to children. Keep
packaging materials in a safe
place away from reach of the
children.
Packaging materials of the
product are manufactured from
recyclable materials. Dispose
of them properly and sort in
accordance with recycled waste
instructions. Do not dispose
of them with normal domestic
waste.
Transportation of the
product
If you need to move the
A
1. Unplug the product before
2. Remove water drainage and
3. Drain the remaining water in
product, do it in upright
position and hold from
the rear side. Tilting the
product onto its front
side may cause the
electronic parts in it get
wet and damaged.
transporting it.
water supply connections.
the product completely.
Dishwasher / User’s Manual
5 / 42
EN
Instructions for safety and envIronment
Compliance with WEEE
Directive and Disposing
of the Waste Product
This product complies with
EU WEEE Directive
(2012/19/EU). This product
bears a classification symbol
for waste electrical and electronic
equipment (WEEE).This product
has been manufactured with high
quality parts and materials which
can be reused and are suitable for
recycling. Do not dispose of the
waste product with normal
domestic and other wastes at the
end of its service life. Take it to the
collection center for the recycling
of electrical and electronic
equipment. Please consult your
local authorities to learn about
these collection centers.
Compliance with RoHS
Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
Package information
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our
National Environment Regulations.
Do not dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
collection points designated by
the local authorities.
6
/42 EN
Dishwasher / User’s Manual
2
Dishwasher
Overview
15
Dishwasher / User’s Manual
1. Upper basket
2. Upper impeller
3. Lower impeller
4. Silverware basket (depends on model)
5. Door
6. Rating Label
7. Control panel
8. Detergent dispenser
9. Lower basket
10. Filters
11. Salt reservoir lid
12. Upper basket rail
13. Upper cutlery basket (depends on model)
14. Tabletop (depends on model)
15. Fan drying system (depends on model)
7 / 42
EN
Dishwasher
Technical specications
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the safety
rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input 220-240 V, 50 Hz (see rating label)
Total power consumption 1800-2100 W (see rating label)
Heater power consumption 1800 W (see rating label)
Total current (depends on the model) 10 A (see rating label)
Drain pump power consumption 30 W (see rating label)
Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0
Mpa)
Technical specifications may be changed without prior notice to improve the
C
quality of the product.
Figures in this manual are schematic and may not match the product exactly.
C
Values stated on the markings of the product or in the printed documents
C
Fan drying system
(depends on model)
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan operation.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock and serial numbers of the product to be tested in
your request e-mail along with your contact information. Code, stock and serial numbers of
the product may be found on the type label attached to the side wall of the door.
8
/42 EN
accompanying the product are obtained in the laboratory on basis of the relevant
standards. Depending on operational and environmental conditions of the
product, these values may vary.
Dishwasher / User’s Manual
3
Installation
To make the product ready for use, make
sure that the electricity, tap water supply
and water drainage systems are appropriate
before calling the Authorised Service Agent.
If they are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.
Preparation of the location
C
B
A
C
When placing the product, pay attention not
to damage the floor, walls, piping, etc. Do
not hold the product from its door or panel
to move it.
and electrical, tap water and
waste water installations at the
place of installation is under
customer's responsibility.
Manufacturer shall not be held
responsible for damages arising
from processes carried out by
unauthorised persons.
Prior to installation, visually
check if the product has any
defects on it. If so, do not have
it installed. Damaged products
cause risks for your safety.
Make sure that the water inlet
and discharge hoses are not
folded, pinched or crushed
while pushing the product into
its place after installation or
cleaning procedures.
Appropriate installation
location
• Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be installed
on a flat surface in order for the door to
be closed comfortably and securely.
• Do not install the product at places
where temperature may fall below 0ºC.
• Place the product on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
Ensure the power cable does
B
• Make sure that you select a location
• Install the product in a place close
not get trapped under the
product.
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
to the tap and the drain. Select the
installation location by considering
that it will not be changed after the
connections are made.
Connecting water supply
• Do not use old or used water inlet
hose on the new product. Use the new
water inlet hose supplied with the
product.
• Connect the water inlet hose directly
to the cold water tap. Permitted water
temperature up to 25°C. Pressure
coming from the tap should be
minimum 0.3 and maximum 10 bars. If
the water pressure exceeds 10 bars, a
pressure relief valve should be installed
in between.
• Open the tap completely after making
the connections to check for water
leaks.
For your safety, close the water
A
inlet tap completely after the
washing programme is over.
Dishwasher / User’s Manual
9 / 42
EN
Installation
min
300
min
120
max 1000
min 500
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection
must be min. 50 cm and max. 100 cm from
the floor. A discharge hose longer than 4
meters will cause washing performance
to be affected.Attach the water discharge
hose to the drainpipe without bending it.
Tightly fix the water discharge hose to the
drainpipe in order to prevent any dislocation
of the water discharge hose during
operation of the product.
Drainpipe must be connected
C
to the foul water system and it
should not be connected to any
surface water drain.
Adjusting the feet
If the door of the product cannot be closed
properly or if the product wobbles when you
push it slightly, then you need to adjust the
feet of the product. Adjust the feet of the
product as illustrated in the relevant section.
Diswashers door must be
A
aligned properly otherwise hot
steam can escape! Danger of
serious burns, other injury or
may damage furniture.
Electrical connection
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
10
/42 EN
We recommend that this appliance be
connected to the mains supply via a suitable
switched and fused socket in a readily
accessible position.
If the supply cord or the mains lead is
damaged please do not replace it yourself.
The supply cord or the mains lead must be
replaced by a Authorised Service Agent or a
similarly qualified person.
Dishwasher / User’s Manual
Installation
This appliance must
A
be earthed
If the fitted moulded plug is not
suitable for your socket, then
the plug should be cut off and
an appropriate plug fitted.
Destroy the old plug, which is
cut off as a plug with a bared
cord could cause a shock
hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this
appliance incorporates a 13A
fuse. Should the fuse need to
be replaced an ASTA approved
BS1362 fuse of the same rating
must be used. Do not forget
to refit the fuse cover. In the
event of losing the fuse cover,
the plug must not be used
until a replacement fuse cover
has been fitted. Colour of the
replacement fuse cover must be
the same colour as that visible
on the pin face of the plug. Fuse
covers are available from any
good electrical store.
Fitting a dierent plug
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals on your plug, proceed as follows:
1. Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol or
coloured green and yellow or green.
2. Connect the blue (neutral) wire to
the terminal in the plug marked ‘N’ or
coloured black.
3. Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or
coloured red.
Dishwasher / User’s Manual
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact a
qualified electrician.
Initial use
Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in sections
“Important safety instructions” and
“Installation”.
• Before using the product, fill the salt
reservoir with 1 litre of water, add salt
(see next page) and stir to dissolve.
Run the Dishwasher without dishes
on a short programme with a small
amount of detergent.
There might be a small amount
A
of water left in the product after
factory quality control tests. This
causes no harm to the product.
11 / 42
EN
Preparation
4
Tips for energy saving
Following information will help you use
the product in an ecological and energyefficient manner.
Wipe away any coarse food remnants on the
dishes before putting them in the product.
Operate the product after filling it
completely.
When selecting a programme, consider
the table of "Programme data and average
consumption values".
Do not put more detergent than suggested
on the detergent package.
Water softening system
The product is equipped with a water
softening system which reduces the
hardness of incoming water. This system
softens the supply water to a level that will
allow washing the dishes with the required
quality.
The mains water hardness must
C
be softened if it is over 7°dH.
Otherwise, hardness ions will
accumulate on the dishes that
are washed and may affect the
washing, rinsing and drying
performances of the machine.
Adjusting the water
softening system
Washing, rinsing and drying performance
of your dishwasher will improve when
the water softening system is adjusted
correctly.
To adjust the system, first learn the water
hardness in your region and adjust as
indicated below.
12
/42 EN
Dishwasher / User’s Manual
Preparation
Unpack the test
strip.
Open the tap and
let the water ow for
approx. 1 minute.
Dip in the test strip
into the water for 1
second.
Take out the strip
from the water and
shake it.
Wait for 1 minute.
Make the necessary
adjustment
according to the test
strip.
After detecting the water hardness:
1. After turning on your machine, press and hold the Delayed Start and Start/Pause/Cancel
keys respectively.
2. Using the Delayed Start key, turn on LEDs 9 and 3.
3. Use the function keys to adjust the water hardness level.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
English Water
Hardness °dE
0-5 0-4 0-8
6-9 5-7 9-13
10-15 8-12 14-22
16-19 13-15 23-27 On the 3rd level, the 3rd programme LED turns on.
20-24 16-19 28-34 On the 4th level, the 4th programme LED turns on.
25-62 20-50 35-90
German Water
Hardness °dH
French* Water
Hardness °dF
Water Hardness Level Indicator
On the 1st level, the 1st programme LED turns on.
On the 2nd level, the 2nd programme LED turns on.
On the 5th level, the 1st, 2nd, 3rd and 4th programme LEDs
turn on.
If the hardness level of the water that you use is above 50°dH or if you are using well water,
than it is recommended to use filter and water purification devices.If the hardness level of
the water that you use is below 7°dH, there is no need to use salt in your dishwasher. In this
case, the Salt Indicator light on the control panel of your dishwasher will light continuously.
If the water hardness is set to level 1, the Salt Indicator will light continuously although it is
not necessary to use salt. If you use salt under this condition, salt will not be consumed and
the lamp will not illuminate.
Dishwasher / User’s Manual
13 / 42
EN
Loading...