Beko DFN04210B, DFN04210S, DFN04210W User guide

Download

Page 1

Dishwasher

User’s Manual

DFN04210W DFN04210S DFN04210B

Document Number :

15 0995 0100_AA_BEKO_A4_EN/ 19-10-16.(16:00)

Page 2

Dishwasher

User’s Manual

DFN04210W DFN04210S DFN04210B

Document Number :

15 0995 0100_AA_BEKO_A4_EN/ 19-10-16.(16:00)

Page 3

Please read this user manual first!

Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. Follow all warnings and information in the user manual. Remember that this user manual is also applicable for several other models. Differences between models will be identified in the manual.

Explanation of symbols

Throughout this User Manual the following symbols are used:

Important information or useful

hints about usage.

Warning for hazardous situations with regard to life and property.

Warning for electric shock.

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations.

Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

This product was manufactured using the latest technology in environmentally friendly conditions.

Page 4

Please read this user manual first!

Explanation of symbols

Throughout this User Manual the following symbols are used:

Important information or useful

hints about usage.

Warning for hazardous situations with regard to life and property.

Warning for electric shock.

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations.

Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Page 5

CONTENTS

1 INSTRUCTIONS FOR SAFETY AND ENVIRONMENT 4

General safety .......................................4

Intended use ..........................................4

Children’s safety .................................... 5

Disposing of packaging material ........5

Transportation of the product ............5

Compliance with WEEE Directive and

Disposing of the Waste Product .........6

Compliance with RoHS Directive ........6

Package information ............................6

2 DISHWASHER 7

Overview ................................................7

Technical specications .......................8

3 INSTALLATION 9

Appropriate installation location .......9

Connecting water supply .....................9

Connection to the drain .......................9

Adjusting the feet .............................. 10

Electrical connection ......................... 10

This appliance must be earthed ...... 10

Fitting a dierent plug .......................11

Initial use ..............................................11

Programme ......................................... 24

Salt indicator ....................................... 24

Rinse Aid indicator ............................. 24

End of programme ............................. 25

Cleaning the lters ............................ 26

6 MAINTENANCE AND CLEANING 26

Cleaning the outer surface of the

product ................................................ 26

Cleaning the interior of the machine 26

Cleaning the hose lter ......................27

Cleaning the impellers .......................27

Lower impeller .....................................27

Upper impeller .................................... 28

7 TROUBLESHOOTING 29

8 GUARANTEE 34

4 PREPARATION 12

Tips for energy saving ........................ 12

Water softening system ....................12

Adjusting the water softening

system ..................................................12

Adding salt ...........................................14

Detergent ............................................. 15

Adding detergent ................................15

Combined tablet detergents .............16

Rinse aid ...............................................17

Collapsible lower basket tines ......... 20

Cutlery basket .................................... 20

Upper basket height adjustable

rack ........................................................21

Height setting with empty basket ...21

5 OPERATING THE PRODUCT 22

Starting your machine ...................... 22

Half Load function ............................. 24

How to cancel the washing

Page 6

Instructions for safety and envIronment

This section contains safety instructions that will help to give protection from risk of personal injury or property damage. Failure to follow these instructions shall void all warranties.

General safety

• Never place the product on a carpet-covered floor; otherwise, lack of airflow beneath the product will cause electrical parts to overheat. This will cause problems with your product.

• Do not operate the product if the power cable / plug is damaged! Call the Authorised Service Agent.

• Connect the product to a grounded outlet protected by a fuse complying with the values in the “Technical specifications” table. Do not neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

• The water supply and draining hoses must be securely fastened and remain undamaged.

• Unplug the product when not in use.

• Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!

• Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.

• The product must be unplugged during installation, maintenance, cleaning and repairing procedures.

• Always have the repair procedures carried out by the Authorised Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.

• Never use chemical solvents in the product. They bring forth the risk of explosion.

• When you pull the upper and lower baskets out completely, the door of the product will bear all the weight of the baskets. Do not put other loads on the door; otherwise, the product may tilt.

• Never leave the door of the product open apart from loading and unloading procedures.

• Do not to open the door of the product when it is running unless necessary. Be careful for the rush of hot steam when you need to open the door.

Intended use

• This product has been designed for domestic use.

• It must be used to do the domestic type dishes only.

• This appliance is intended

/36 EN

Dishwasher / User’s Manual

Page 7

Instructions for safety and envIronment

to be used in household and similar applications such as:

- Staff kitchen areas in shops, offices and other working environments.

• Only dishwasher safe detergents, rinse aids and additives must be used.

• The manufacturer waives any responsibility arisen from incorrect usage or transportation.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Chldren’s safety

• Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not let them to tamper with the product.

• Do not forget to close the door of the product when leaving the room where it is located.

• Store all detergents and additives in a safe place away from the reach of the children.

Dsposng of packagng materal

Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children. Packaging materials of the product are manufactured from recyclable materials. Dispose of them properly and sort in accordance with recycled waste instructions. Do not dispose of them with normal domestic waste.

Transportaton of the product

If you need to move the

1. Unplug the product before

2. Remove water drainage and

3. Drain the remaining water in

product, do it in upright position and hold from the rear side. Tilting the product onto its front side may cause the electronic parts in it get wet and damaged.

transporting it.

water supply connections.

the product completely.

Dishwasher / User’s Manual

5 / 36

Page 8

Instructions for safety and envIronment

Complance wth WEEE Drectve and Dsposng of the Waste Product

This product complies with EU WEEE Directive (2012/19/EU). This product

bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

collection points designated by the local authorities.

Complance wth RoHS Drectve

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package nformaton

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material

/36 EN

Dishwasher / User’s Manual

Page 9

Dishwasher

Overvew

Top Cover (depends on model)

Upper impeller

Lower basket

Lower impeller

Filters

Rating Label

Control panel

Door

Detergent dispenser

10.

Lower impeller slot

11.

Cutlery basket

12.

Salt reservoir lid

13.

Upper basket rail

14.

Upper basket

Dishwasher / User’s Manual

7 / 36

Page 10

Dishwasher

Techncal specfcatons

Compliance to standards and test data / EC declaration of conformity

This product complies with the following EU directives;

Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242

Power input 220-240 V, 50 Hz (see rating label)

Total power consumption 1800-2100 W (see rating label)

Heater power consumption 1800 W (see rating label)

Total current (depends on the model) 10 A (see rating label)

Drain pump power consumption 30 W (see rating label)

Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0

Mpa)

Technical specifications may be changed without prior notice to improve the

quality of the product.

Figures in this manual are schematic and may not match the product exactly.

Values stated on the markings of the product or in the printed documents

Note for test institutions:

Data required for performance tests shall be provided upon request. Requests can be e-mailed to the following address:

[email protected]

Do not forget to provide the code, stock and serial numbers of the product to be tested in your request e-mail along with your contact information. Code, stock and serial numbers of the product may be found on the type label attached to the side wall of the door.

/36 EN

accompanying the product are obtained in the laboratory on basis of the relevant standards. Depending on operational and environmental conditions of the product, these values may vary.

Dishwasher / User’s Manual

Page 11

Installation

To make the product ready for use, make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorised Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.

Preparation of the location

B A

When placing the product, pay attention not to damage the floor, walls, piping, etc. Do not hold the product from its door or panel to move it.

and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.

Manufacturer shall not be held responsible for damages arising from processes carried out by unauthorised persons.

Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

Make sure that the water inlet and discharge hoses are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

Approprate nstallaton locaton

• Place the product on a solid and flat floor that has sufficient load carrying capacity! The product must be installed on a flat surface in order for the door to be closed comfortably and securely.

• Do not install the product at places where temperature may fall below 0ºC.

• Place the product on a rigid floor. Do not place it on a long pile rug or similar surfaces.

Ensure the power cable does

• Make sure that you select a location

• Install the product in a place close

not get trapped under the product.

that will allow you to load and unload the dishes in a fast and comfortable manner.

to the tap and the drain. Select the installation location by considering that it will not be changed after the connections are made.

Connectng water supply

• Do not use old or used water inlet hose on the new product. Use the new water inlet hose supplied with the product.

• Connect the water inlet hose directly to the cold water tap. Permitted water temperature up to 25°C. Pressure coming from the tap should be minimum 0.3 and maximum 10 bars. If the water pressure exceeds 10 bars, a pressure relief valve should be installed in between.

• Open the tap completely after making the connections to check for water leaks.

For your safety, close the water

inlet tap completely after the washing programme is over.

Connecton to the dran

Water discharge hose can directly be connected to the drain hole or sink’s drainage. The length of this connection

Dishwasher / User’s Manual

9 / 36

Page 12

Installation

min

300

min

120

max 1000

min 500

must be min. 50 cm and max. 100 cm from the floor. A discharge hose longer than 4 meters will cause washing performance to be affected.Attach the water discharge hose to the drainpipe without bending it. Tightly fix the water discharge hose to the drainpipe in order to prevent any dislocation of the water discharge hose during operation of the product.

Drainpipe must be connected

to the foul water system and it should not be connected to any surface water drain.

Adjustng the feet

If the door of the product cannot be closed properly or if the product wobbles when you push it slightly, then you need to adjust the feet of the product. Adjust the feet of the product as illustrated in the relevant section.

Electrcal connecton

Before you insert the plug into the wall socket make sure that the voltage and

/36 EN

the frequency shown in the rating label corresponds to your electricity supply.

We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.

If the supply cord or the mains lead is damaged please do not replace it yourself. The supply cord or the mains lead must be replaced by a Authorised Service Agent or a similarly qualified person.

Ths applance must

be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket elsewhere in the house. The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

Dishwasher / User’s Manual

Page 13

Installation















Fttng a derent plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:

1. Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’ or with the symbol or coloured green and yellow or green.

2. Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3. Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.

• Before using the product, fill the salt reservoir with 1 litre of water, add salt (see next page) and stir to dissolve. Run the Dishwasher without dishes on a short programme with a small amount of detergent.

There might be a small amount

of water left in the product after factory quality control tests. This causes no harm to the product.

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

Intal use

Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections “Important safety instructions” and “Installation”.

Dishwasher / User’s Manual

11 / 36

Page 14

Preparation

Tps for energy savng

Following information will help you use the product in an ecological and energyefficient manner. Wipe away any coarse food remnants on the dishes before putting them in the product. Operate the product after filling it completely. When selecting a programme, consider the table of “Programme data and average consumption values”. Do not put more detergent than suggested on the detergent package.

Water softenng system

Your dishwasher requires soft

water. If the hardness of the water is above 6°dH, the water must be softened and descaled. Otherwise, ions that create the hardness will accumulate on the surfaces of the dishes and may adversely affect the washing, shining and drying performances of the product.

Adjustng the water softenng system

Cleaning, rinsing and drying performance of your dishwasher will increase when water softening system is adjusted properly. Adjust the new water hardness level according to the Water hardness level instruction in this booklet. Use the test strip supplied with the product according to the steps given below to determine hardness level of your supply water.

The product is equipped with a water softening system which reduces the hardness of incoming water. This system softens the supply water that enters into the product to a level that will allow washing the dishes with the required quality.

/36 EN

Dishwasher / User’s Manual

Page 15

Preparation

a b

Remove the test strip from the packet.

1 min.

Turn on the tap and let the water run for about a minute.

1 Second

Hold the test strip in the water for about a second.

d e f

1 Minute

Remove the test strip from the water and shake it.

Wait for 1 minute. The test strip shows

you the hardness level.

After determining hardness level of the supply water:

1. When the Programme Selection key is at “Off” position, keep Start/Pause/Cancel key pressed and turn the Programme Selection key to position “1” within 5 seconds. Machine will enter into the regeneration adjustment mode at the end of this period.

2. Regeneration level in the memory will be illuminated for 5 seconds when the regenerator adjustment mode is activated.

3. To adjust the new Water Hardness Level, move the Programme Selection key to the position that is suitable for your supply water. (see, “Water Hardness Level Adjustment Table”)

4. Press Start/Pause/Cancel key for once to store the level you have selected. Machine returns to the normal operating mode after the new setting is stored. * Programme Selection key rotates in 5 steps regardless of the number of the programmes contained on the machine.

5. Press “Start/Pause/Cancel” key for once to store the level you have selected.

Water hardness level adjustment table

Hardness Level

0th Level

1st Level

2nd Level

3rd Level

4th Level

5th Level

English Water Hardness °dE

10-15 8-12 14-22 2

16-19 13-15 23-27 3 End lamp on the panel will illuminate.

20-24 16-19 28-34 4

25-62 20-50 35-90 5

German Water Hardness °dH

0-5 0-4 0-8 1

6-9 5-7 9-13 1

French Water Hardness °dF

Position of Program Selection Key*

Water Hardness Level Indicator

Washing lamp on the panel will illuminate.

Drying lamp on the panel will illuminate.

Washing, Drying and End lamps on the panel will illuminate.

Washing, Drying and End lamps on

the panel will ash with an interval of

1 second.

If the hardness level of the supply water is above 90 °dF or if you are using well water, then it is recommended to use water purification devices and special filters.

If the hardness level of the supply water is below 13°dF, there is no need to use salt in your dishwasher. If this is the case, “No Salt Warning Indicator” (if any) illuminates continuously on the panel of your machine.

Dishwasher / User’s Manual

13 / 36

Page 16

Preparation

If the water hardness level adjustment is set to level 1, the “No salt warning indicator” will illuminate continuously although it is not necessary to use salt. If you use salt under this condition, salt will not be consumed and the Salt indicator will not illuminate.

If you move your house, it is

Addng salt

Water softening system needs to be regenerated in order that the product operates with the same performance continuously. Dishwasher salt is used for this purpose.

C C

necessary to readjust water hardness level of your machine by considering the information given above according to the hardness level of the supply water in your new location. Your machine will display the most recently adjusted water hardness level.

Use only special softening salts produced particularly for the dishwashers in your machine.

We recommend using granular or powder softening salts. Do not use salts that are insoluble in water such as table salt or common salt. Performance of water softening system may get worse in time.

2. Turn the salt reservoir lid counter clockwise to open it (A, B).

Salt reservoir will fill with water

when you start the product. Therefore, add the softening salt before starting the machine.

Before initial use, fill the water softening system with 1 litre of water (C).

Salt reservoir will fill with water

1. First take the lower basket out to add

/36 EN

when you start the product. Therefore, add the softening salt before starting the machine.

softening salt.

Dishwasher / User’s Manual

Page 17

Preparation

3. Fill the salt reservoir with salt by using salt funnel (D). To speed up dissolution rate of salt in water, stir it with a spoon.

You can put about 2 kg of dishwasher salt into the salt

4. Replace the lid and tighten it securely

5. If you will not start a washing

reservoir.

when the reservoir is full.

programme immediately after adding the salt, run the machine empty in the shortest programme to dissolve and wash away the scattered salt in the machine.

Since different salt brands in the market have different particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours. Therefore, Salt Indicator remains on for a while after adding salt into the machine. Loose salt grains can cause rust marks in your machine if not rinsed away. Only fill salt just before a programme is run.

detergents in the machine.

Only use the detergents

Addng detergent

C C

Put the detergent into the detergent dispenser just before operating the machine as illustrated below.

1. Push the latch to right to open the

produced particularly for use with dishwashers. Never use washing up liquids. We recommend you not to use detergents that contain chlorine and phosphate as they are harmful for the environment.

Refer to the “Programme Table” to determine the correct amount of detergent for the selected programme.

In order to have good washing and drying results, always follow the instructions on the detergent packaging. If you have further questions, we recommend to contact with the producer of the detergent.

Do not put solvents into the detergent dispenser. There is risk of explosion!

detergent dispenser lid (A).

Detergent

You can use powder, liquid/gel and tablet

Dishwasher / User’s Manual

15 / 36

Page 18

Preparation

2. Put suggested amount of powder, liquid/gel or tablet detergent in the dispenser.

Inside the detergent dispenser,

3. Close the detergent dispenser lid by

there are level markings that help you use appropriate amount of detergent. When brimful, detergent dispenser will contain 40 cm³ of detergent. Fill detergent up to 15 cm³ or 25 cm³ level marks in the detergent dispenser according to fullness of the machine and/or soiling degree of the dishes (1).

If dishes have been waiting for a long time and have dried residues, fill the 5 cm³ compartment too (2).

pressing on it lightly. A “click” will be heard when the lid is closed.

In programmes with prewash and high temperature, in which you use tablet detergents, make sure that the detergent dispenser lid is closed firmly.

Use powder detergent in short

Combned tablet detergents

Combined tablet detergents exhibit water softening and / or rinse aid effect in addition to detergent effect. Some types of these detergents also contain specialpurpose washing chemicals such as glass and stainless steel protectors. Combined tablet detergents are available as 3in1, 5in1, Allin1 etc. They function only up to a specific degree of water hardness. Above this limit regeneration salt and rinse aid must be added. Refer to the instructions on the packaging of the combined detergent whether it is suitable for the hardness level of the water supply.

programmes without prewash since the solubility of the tablet detergent changes depending on the temperature and time.

Excessive usage of powder detergents will cause the detergent not dissolve completely and will also cause scratches on the glassware.

While using combined tablet detergents contact with the detergent producers if the dishes are wet and/or if you notice limescale spots particularly on glasses after the washing programme is over.

/36 EN

Dishwasher / User’s Manual

Page 19

Preparation

The best washing performance

When you switch to powder, liquid/gel or tablet detergent from a combined tablet detergent:

1. Make sure that salt and rinse aid

2. Set the water hardness to the highest

3. After the empty washing cycle, review

4. Make the appropriate rinse aid settings.

in dishwashers is obtained by using detergent, rinse aid and water softening salt individually.

reservoirs are full.

level and perform an empty run.

the user manual and readjust the water hardness level so as to suit the water supply.

Depending on the model, salt indicator and/or rinse aid indicator must be enabled again if they were disabled before.

Rnse ad

The rinse aid used in

dishwashers is a special combination used to increase drying efficiency and prevent water or limescale stains on the washed items. For this reason, care must be paid to have rinse aid in the rinse aid reservoir and to use rinse aids produced specially for dishwashers only.

1. Open the lid of the rinse aid reservoir by pressing its latch (B).

2. Fill the reservoir until “MAX” level.

3. Turn the rinse aid amount adjuster manually to a position between 1 and 6 (4). If there are stains on tableware items after washing, level must be increased and if there is a blue trace after wiping them by hand, it must be decreased. This is set to position 4 as factory default.

4. Close the lid of the reservoir by pressing on it lightly.

Dishwasher / User’s Manual

Wipe clean any spilled rinse aid outside the reservoir. Rinse aid that spilled accidentally will cause foaming and it will eventually decrease washing performance.

17 / 36

Page 20

Preparation

Items not suitable for washing in the dishwasher

• Never wash dishes soiled by cigarette ash, candle remnants, polish, dyestuff, chemicals, etc. in your dishwasher.

• Do not wash iron alloy items in the dishwasher. It can get corroded or leave stains on other items.

• Do not wash cutlery with wooden or bone stems, glued pieces, or pieces that are not resistant to heat, as well as copper and tin-plated containers in the dishwasher.

Decorative prints of chinaware

as well as aluminum and silver items may get discoloured or tarnished after washing in the dishwasher just as it happens in handwashing as well. Some delicate glass types and crystals may become dull in time. We strongly recommend you to check if the tableware you are going to purchase is suitable for washing especially in the dishwasher.

and smaller, delicate and light items in the upper basket.

• Place the hollowed dishes such as bowls, glasses and pans upside down in the dishwasher. Thus, accumulation of water in deep hollows is prevented.

To prevent possible injuries,

Unload dishes in the lower basket first and then the dishes in the upper basket.

always place the sharp and pointed dishes such as service fork, bread knife, etc. upside down so as their pointed ends will face down or they will lie horizontally in the dish basket.

Placing the dishes into the dishwasher

You can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way.

• Wipe away any coarse food remnants (bones, seeds, etc.) on the dishes before placing them in the dishwasher.

• Place thin, narrow pieces in the middle sections of baskets if possible.

• There are two separate baskets in which you can place your dishes in the dishwasher. Place the heavily soiled and bigger items in the lower basket

/36 EN

Dishwasher / User’s Manual

Page 21

Preparation

Suggestions for loading the dishwasher

Lower basket

Improper Loading Of Dishware

Upper basket

Improper Loading Of Dishware

Dishwasher / User’s Manual

19 / 36

Page 22

Preparation

Collapsble lower basket tnes

There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each tines individually or all of them at once.

To bring the collapsible tines into horizontal position, grab the tines from mid position and push them in the directions of arrows (B). To bring the tines back to vertical position, just lift them up. Collapsible tines will click into the latch again (C).

Bringing the tines to the horizontal position by holding

them from the tips may cause them to bend. Therefore, it will be appropriate to bring the tines in the middle to horizontal or vertical position by holding them from their stems and pushing in the direction of arrow.

Cutlery basket

Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an efficient manner. Since the cutlery basket can be moved (A, B), you can create more space while placing your dishes in the lower basket and free up space for your dishes of different sizes.

/36 EN

Dishwasher / User’s Manual

Page 23

Preparation

Upper basket heght adjustable rack

Use the lower and upper parts of the height adjustable racks in the upper basket of the machine by sliding them down or up according to the heights of the glasses, cups or etc. (A, B, C).

Heght settng wth empty basket

In this model, the height setting of the upper basket may be changed using the wheels which are mounted at two different heights. Release the latches on both the right and left tracks of the upper basket by pushing them outwards Pull out the basket out completely. Place the basket back into the tracks at the desired height Push the latches back into the correct position.

Dishwasher / User’s Manual

21 / 36

Page 24

Operating the product

1 2 3 4

567

1. Programme Starting Point

2. Rinse Aid indicator

3. Salt indicator

4. On/Off Indicator Light & Progress Indicator Lights

On/Off

Machine will be switched on when you move the Programme Selection key to position “1”. “ON” light will illuminate. Machine will be switched off when you move it to ”OFF” position. All lights will turn of f.

Programme selection Key

Used to switch on/off the machine and select the washing programmes.

Half Load key

Select Half Load when using any wash programme [Except Prewash] to save on water, electricity and time if the machine is only half full. You can place dishes anywhere in the machine; some upper and some lower basket.

Start / Stop key

It is used to start, pause or cancel the selected programme. When you press the Start / Stop key, the washing programme you have selected will start.

To press the Start / Stop key,

wait for two seconds after you turn on the machine.

5. Start / Stop key

6. Half Load key

7. On/Off/Programme Selection Key

Startng your machne

1. Open the tap.

2. Plug in to the socket.

3. Open the door of the dishwasher.

4. Place the dishes in accordance with the instructions in the user manual.

5. Make sure that the upper and lower impellers rotate freely.

6. Put sufficient amount of detergent in the detergent dispenser and close its lid.

7. Check if the Salt and Rinse Aid indicators light and add salt and / or rinse aid if needed and close the door of the machine.

9. Select the most suitable programme by using the table of “Programme Data and Average Consumption Values”.

10. Select the desired programme with Programme Selection key.

11. Start the programme by pressing Start / Stop key.

/36 EN

Dishwasher / User’s Manual

Page 25

Operating the product

1234

Eco * Intensive Clean&Shine Mini 30

50 ºC 70 ºC 65 ºC 35 ºC

Most economical washing programme for

the medium soiled daily dishes that are

kept waiting.

Suitable for heavily soiled dishes, pots

and pans.

Daily washing programme for normally

soiled dishes.

Suitable for lightly soiled daily dishes that

are scraped or pre-cleaned.

Medium High Medium Low

A+B A+B A+B A

++- -

++++

+++-

190 124 90 30

12 17,6 11,8 11,8

1,02 1,70 1,24 0,79

Programme Table

The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions. * Reference

programme for testing institutes. The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir,

and using the test programme.

Programme number

Programme name

Cleaning temperature

Degree of Soiling

Detergents

A=25 cm³/15 cm³ B=5 cm³

Energy (kWh)

Prewash

Wash

Dry

Duration (min)

Water (I)

Dishwasher / User’s Manual

23 / 36

Page 26

Operating the product

C C

Programme and auxiliary functions cannot be set/ changed after the programme has started.

Your machine performs water softening depending on the hardness level of the supply water. The total time can also change while the programme is running depending on the ambient temperature where your machine is installed, temperature of the supply water and amount of the dishes.

Pay attention not to open the door of the machine when it is running. If you need to open the door, safety system will stop your machine. There may be a rush of vapour when you open the door of your machine; be careful. Washing programme will resume running when you close the door.

With the Half Load function you

C C

How to cancel the washng Programme

To cancel a programme while the machine is operating: Press start/stop key for 3 seconds. The machine will drain the water inside the machine for 45 seconds. The programme is cancelled when washing light goes off. Then, you can choose and start a new programme.

can save both water and power while using the lower and upper baskets of the machine.

Half Load function may cause changes in the programme duration.

There might be residues of detergent or rinse aid left in the machine and / or on the pieces being washed depending on the step the programme you have cancelled was in.

Half Load functon

It is used to operate the machine without loading it completely.

1. Load your dishes in the machine using top and bottom baskets

2. Turn the machine on.

3. After selecting the desired programme, press the Half Load key. Half Load indicator lights up.

4. Close your machine’s door and press Start / Stop key.

/36 EN

Salt ndcator

Please check the Salt Indicator on the panel to see whether there is adequate amount of softening salt in the dishwasher or not. You need to refill the salt reservoir with salt whenever salt warning indicator appears on the panel of your machine.

Rnse Ad ndcator

Please check the Rinse Aid Indicator on the panel to see whether there is adequate amount of rinse aid in the dishwasher or not. You need to refill the rinse aid reservoir with rinse aid whenever rinse aid warning indicator appears on the panel of your machine.

Dishwasher / User’s Manual

Page 27

Operating the product

End of programme

When the programme you have selected comes to an end, the End progress indicator light will lights up.

1. Open the door of the dishwasher.

2. Turn off your machine.

3. Close the tap.

4. Unplug the machine from the socket.

Leave your dishes in the

machine for about 15 minutes after they are washed in order to have them cooled down. Your dishes will dry in a shorter time if you leave the door of your machine ajar during this period. This will increase the drying effectiveness of your machine.

Dishwasher / User’s Manual

25 / 36

Page 28

Maintenance and cleaning

Service life of the product extends and frequently faced problems decrease if it is cleaned at regular intervals.

Unplug the product and turn off

C C

the tap before attempting any cleaning procedures.

Do not use abrasive substances for cleaning.

Clean the filter and impellers at least once a week to ensure the machine operates efficiently.

Cleanng the outer surface of the product

Clean the outer surface and door gaskets of the product gently with a mild cleaning material and damp cloth. Wipe the control panel only with a damp cloth.

Cleanng the nteror of the machne

• Clean the interior of the machine and the tank by running a prewash programme without detergent or a long washing programme with detergent based on the degree of dirtiness.

• If water has remained in the machine, drain the water by performing the procedures under the topic “Cancelling a programme”. If the water cannot be discharged, clean any leftover deposits that have piled up in the bottom of the machine, blocking the water path.

them out and clean well under running water.

1. Turn the micro filter (1) and coarse filter (2) assembly counterclockwise and pull it out from its seating (A).

2. Pull out the metal / plastic filter (3) from the seating (C).

3. Press the two pawls on the coarse filter inwards and separate the coarse filter from the assembly (B).

Cleanng the flters

Clean the filters at least once a week in order for the machine operates efficiently. Check if food residues are left on the filters. If there are food residues on filters, take

/36 EN

4. Clean all three filters under tap water by means of a brush.

Dishwasher / User’s Manual

Page 29

Maintenance and cleaning

5. Replace the metal/plastic filter.

6. Place the coarse filter into the microfilter. Make sure that it is properly seated. Turn the coarse filter clockwise until a “click” sound is heard.

Do not use the dishwasher

without filter.

Incorrect placement of the filters will reduce washing efficiency.

Cleanng the hose flter

Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. Check the filter and the hose regularly and clean them if necessary.

1. Turn off the tap and remove the hose.

2. After taking out the filter, clean it under running tap water.

3. Place the cleaned filter back to its seat in the hose.

4. Install the hose to tap.

Cleanng the mpellers

Clean the impellers at least once a week in order for the machine operates efficiently.

Lower mpeller

Check if the holes on the lower impeller (1) are clogged. If they are clogged, remove and clean the impeller. Pull the lower impeller up to remove it (A, B).







(depends on model)

Dishwasher / User’s Manual



27 / 36

Page 30

Maintenance and cleaning

Upper mpeller

Check if the holes on the upper impeller (1) are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to remove the upper impeller (A, B). Make sure that the nut is tightened well when installing the upper impeller.









/36 EN

Dishwasher / User’s Manual

Page 31

Troubleshooting

Machine does not start.

• Power cable is unplugged. >>> Check if the power cable is plugged in.

• Fuse is blown. >>> Check the fuses in your house.

• Water is cut. >>> Make sure that the water inlet tap is open.

• Door of the machine is open. >>> Make sure that you have closed the door of the machine.

• On / Off button is not pressed. >>> Make sure that you have turned on the machine by pressing the On / Off button.

Dishes are not washed clean

• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the user manual.

• Selected programme is unsuitable. >>> Select a programme with a higher temperature and cycle time.

• Impellers are stuck. >>> Prior to starting the programme, turn the lower and upper impellers by hand to make sure that they rotate freely.

• Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with food remnants such as lemon pips. Clean the impellers regularly as illustrated in section “Cleaning and Care”.

• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”.

• Filters are installed incorrectly. >>> Check the filter system and make sure that it is installed correctly.

• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.

• Detergent is stored under unsuitable conditions. >>> If you are using powder detergent, do not store the detergent package in humid places. Keep it in a closed container if possible. For ease-of-storing, we recommend you to use tablet detergents.

• Detergent is not sufficient. >>> If you are using powder detergent, adjust the amount of detergent according to the soiling degree of your dishes and/or programme definitions. We recommend you to use tablet detergents for optimum results.

• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine.

• Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser lid is closed tightly after adding detergent.

Dishes are not dry at the end of cycle

• Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no water will accumulate in them.

• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if

Dishwasher / User’s Manual

29 / 36

Page 32

Troubleshooting

necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine.

• Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed. Slightly open the door and wait for evacuation of the steam inside for a while. Unload the dishes after the pieces cool down to a touchable level. Start unloading process from the lower basket. Thus, dropping of water remained on a piece at upper basket onto the pieces at lower basket is prevented.

• Selected programme is unsuitable. >>> Since rinsing temperature is low at programmes with short duration, drying performance will also be low. Select programmes with longer duration for a higher drying performance.

• Surface quality of the kitchen utensils is deteriorated. >>> Desired washing performance can not be obtained on kitchen utensils with deteriorated surfaces and it is not suitable to use such utensils in terms of hygiene as well. Also, water can not flow easily on deteriorated surfaces. It is not recommended to wash such kitchen utensils in dishwasher.

It is normal that drying complaints can be experienced with Teflon kitchen utensils. It is associated with the structure of Teflon. Since the surface tensions

Tea, cafe or lipstick stains remain on dishes.

• Selected programme is unsuitable. >>> Select a programme with a higher temperature

• Surface quality of the kitchen utensils is deteriorated. >>> Tea and cafe stains or

• Detergent is stored under unsuitable conditions. >>> If you are using powder

of Teflon and water are different, water droplets will remain as beads on the Teflon surface.

and cycle time.

other dye spots may not be cleaned in dishwasher when they have penetrated in deteriorated surfaces. Desired washing performance can not be obtained on kitchen utensils with deteriorated surfaces and it is not suitable to use such utensils in terms of hygiene as well. It is not recommended to wash such kitchen utensils in dishwasher.

detergent, do not store the detergent package in humid places. Keep it in a closed container if possible. For ease-of-storing, we recommend you to use tablet detergents.

Lime traces remain on dishes and glassware gains a misty appearance

• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine.

• Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the supply water appropriately and check the water hardness setting.

• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash programme to remove the salt that spilled inside

/36 EN

Dishwasher / User’s Manual

Page 33

Troubleshooting

the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme.

There is a different odour in the machine

A new machine has a peculiar odour. It will fade out after a couple of washes.

• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”.

• Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going to start the machine right after you have put the dishes into it, remove the remnants on the dishes and run the Prewash programme without detergent every 2 days. In such cases, do not close the door of the machine completely in order to avoid odour build up in machine. You can also use commercially available odour removers or machine cleaners.

Rust, discoloration or surface deterioration occurs on dishes

• Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces. Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme.

• Salty food remnants have remained on dishes for a long time. >>> If cutlery soiled with such foods will be kept waiting in machine, dirt must be removed by prewash or dishes must be washed without being kept waiting.

• Electric installation is not grounded. >>>Check if your machine is connected to the actual grounding line. Otherwise, the static electric created in the product causes arcs on the surfaces of metal items creating pores, removing the protective cover on the surface and causing discoloration.

• Intensive cleansers such as bleaches are used. >>> Protective cover on metal surfaces gets damaged and looses its efficiency in time when it gets in contact with cleansers such as bleach. Do not wash your dishes with bleach.

• Metal items particularly such as knives are used for purposes other then their intended uses. >>> Protective cover on the edges of knives may get damaged when they are used for purposes such as opening cans. Do not use metal kitchen utensils out of their intended uses.

• Cutlery are made of low quality stainless steel. >>> Corrosion on such items is inevitable; they should not be washed in dishwashers.

• Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust on a corroded item can migrate to other stainless steel surfaces and cause corrosion on those surfaces as well. Such items should not be washed in dishwashers.

Dishwasher / User’s Manual

31 / 36

Page 34

Troubleshooting

Detergent remains in detergent dispenser.

• Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent.

• Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.

• Opening of the detergent dispenser lid is prevented during washing. >>> Place the dishes in a way that will not prevent the detergent dispenser lid from opening and the water going into the machine from impellers.

Decorations and ornaments on kitchen utensils are being erased.

Decorated glasses and decorated lustre porcelains are not suitable for washing in the dishwasher. Manufacturers of some glassware and porcelain tableware

Dishes are scratched.

items do not recommend washing such kitchen utensils in the dishwashers either.

Kitchen utensils that contains or are made of aluminum should not be washed

• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while

• Water hardness setting is low or salt level is insufficient >>> Measure the hardness of

• Dishes are not placed orderly in the machine. >>> When placing the glasses and other

/36 EN

in dishwasher.

adding salt. Spilled salt can cause scratches. Make sure that the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme.

the supply water appropriately and check the water hardness setting.

glassware into the basket lean them not against other dishes but the edges or racks of the basket or the glass support tines. Striking of the glasses to each other or to other dishes due to the impact of water during washing can cause breaks, or scratches on their surfaces.

Dishwasher / User’s Manual

Page 35

Troubleshooting

A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light.

• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.

• Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the supply water appropriately and check the water hardness setting. If your supply water is soft (<5 dH), do not use salt. Choose programmes that wash in higher temperatures (e.g. 60-65°C). You can also use glass protective detergents that are commercially available.

Foam forms in the machine.

• Dishes are washed with hand-wash detergent by hand but not rinsed before placing them into the machine. >>> Hand-wash detergents do not contain antifoam. There is no need to hand-wash the dishes before placing them into the machine. Removing the coarse soil on the dishes under tap water, with a tissue paper or fork will be sufficient.

• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse aid is not spilled in the machine when you are filling it. Clean any spilled rinse ait with the help of a tissue paper/towel.

• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid reservoir is closed after adding rinse aid.

Kitchen utensils are broken.

• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the user manual.

• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.

Water remains in the dishwasher at the end of the programme.

• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”.

• Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary, remove the discharge hose, clear the blockage and insert is as illustrated in the user manual.

If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorised Service Agent. Never try to repair

Dishwasher / User’s Manual

a nonfunctional product yourself.

33 / 36

Page 36

Guarantee

Guarantee for Refrigeration, Cooking Appliances, Washing Machines & Dishwashers.

Please visit the “Support” section on the Beko website at www.beko.co.uk to register your one year warranty.

Your new Beko product is guaranteed against the cost of breakdown repairs for one year from the date of the original purchase.

What is covered?

• Repairs necessary as a result of faulty materials, defective components or manufacturing defect.

• The cost of functional replacement parts, but excluding consumable items.

• The labour costs of a Beko approved repairer to carry out the repair

What is not covered?

• Transit, delivery or accidental damage or misuse and abuse.

• Cabinet or appearance parts, including knobs, flaps, handles or container lids.

• Accessories or consumable items including but not limited to, ice trays, scrapers, cutlery baskets, filters and light bulbs.

• Repairs required as a result of unauthorised repair or inexpert installation that fails to meet the requirements contained in the user instruction book.

• Repairs to products used on commercial or non-residential household premises.

• Loss of frozen food in freezers or fridge/freezers. (Food loss insurance is often included within your household

contents insurance policy, or may be available separately from your retailer).

Important notes.

• Your Beko product is designed and built for domestic household use only.

• The guarantee will be void if the product is installed or used in commercial or non-residential domestic household premises.

• The product must be correctly installed, located and operated in accordance with the instructions contained in the User Instructions Booklet provided.

• Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all Washing Machines, Dishwashers and Electric Cookers

• Gas Cookers must only be installed by a Gas safe (or BORD GAIS) registered Gas Installer.

• The guarantee is given only within the boundaries of the United Kingdom and the Republic of Ireland.

• The guarantee is applicable only to new products and is not transferable if the product is resold.

• Beko disclaims any liability for incidental or consequential damages.

• The guarantee does not in anyway diminish your statutory or legal rights.

• The product guarantee does not cover damages to plates,glass ware, cutlery, crockery and also damage to the product itself as a result of using these “Three-in-one”, “Two-in-one” detergents.

/36 EN

Dishwasher / User’s Manual

Page 37

Guarantee

Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it should the product require attention under guarantee.

You should also complete the details below; it will help us assist you when requesting service. (The model number is printed on the Instruction Booklet and the serial number is printed on the Rating Label affixed to the appliance)

Model No: Serial No: Retailer: Date of purchase:

For service under guarantee simply telephone the appropriate number below

UK Mainland & Northern Ireland

Fridges & Freezers 0845 6004903 or 0345 6004903 Electric Cookers 0845 6004902 or 0345 6004902 Gas&Dual Fuel Cookers 0845 6004905 or 0345 6004905 Washing Machines 0845 6004906 or 0345 6004906 & Dishwashers

Republic of Ireland

All Refrigeration, All Cookers 01 862 3411 Washing Machines & Dishwashers

Before requesting service please check the trouble-shooting guide in the Operating Instructions as a charge may be levied where no fault is found even though your product may still be under guarantee.

Service once the manufacturers guarantee has expired.

If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee agreement document. Otherwise please call the appropriate number above where service can be obtained at a charge.

Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line. Tel: 0845 6004911 e-mail: [email protected]

Beko plc, Beko House, 1 Greenhill Crescent, Watford Hertfordshire, WD18 8QU, UK www.beko.co.uk

Dishwasher / User’s Manual

35 / 36

Page 38