Beko BKK 2133 User manual

Household Steam Iron
User’s Manual

BKK 2133

Please read this manual first!

Dear Customer,
We hope that your product which has been manufactured in modern facili­ties and passed through a strict quality control procedure will give you the
best results.
Therefore, we advise you to read through this manual carefully before using
your product and keep it for future reference.

This operation manual will...

...help you use your machine in a fast and safe way.

• Please read the Operation Manual before installing and starting your

machine.

• Particularly follow the instructions related to safety.

• Keep this Operating Manual within easy reach. You may need it in the

future.

• Please read all additional documents supplied with this machine.
Please note that this Operating Manual may be applicable for several other

models. Differences between models will be identified in the manual.

This product has been produced in environmentally friendly, modern facilities

Contents

1 Safety Warnings 2

2 Technical Aspects Of Your Machine 3

3 Hints For Ironing 4-8

4 Maintenance And Cleaning 9

1

Safety Warnings

1

For safety purpose you should read
these instructions carefully before
using the iron for the first time.

DO’S

1. Check the mains voltage stated
on the iron.

2. Unwind and straighten the power
cord before use.

3. Switch on the iron by turning the
Temperature Dial in clockwise direc­tion; pilot light glows.

4. Turn the Temperature Dial to the
middle point of 1 dot, 2 dots, 3 dots
or maximum setting.

5. Switch off the iron by turning the
Temperature Dial in anti-clockwise
direction when it is not in use, even
for a short period of time. Turn the

Temperature Dial to°•Min° position.

6. Disconnect the iron from mains
supply outlet when filling or emptying
water.

7. Remove the water remained in the
water tank.

8. Use the Self-Cleaning function at
least once a month.

9. Switch off the steam function by
moving the steam control knob to

position when it is not in use, even

for a short period of time.

10. If the supply cord is damaged, it
must be replaced by the manufac­turer or its service agent or similarly
qualified person in order to avoid a
hazard.

iron or the power cord when ironing.

2. Do not leave the iron unattended
when it is connected to a mains
supply outlet.

3. Do not use an extension power
cord set unless competent authority
has approved it.

4. Do not add perfumed, vinegar or
other chemical liquids into the water
tank; they can damage the iron
seriously.

5. Do not immerse the iron in water
or any other liquid.

6. Do not use the iron when it is
damaged or it works improperly.

7. Do not roll the power cord around
the iron for storage until it has
cooled down completely.

8. Do not attempt to open the
cabinets or dismantle any parts from
the iron; there is no serviceable part
inside.

DO NOT’S

1. Do not allow children touch the

2