Beko BKK 2132 K User Manual

Household Steam Iron

User Manual

BKK 2132 K

Read this manual prior to initial operation of the product!

Dear Customer,
We hope that your product, which has been manufactured in
modern facilities and passed through a strict quality control
procedure, will give you very good results.
We advise you to read through this manual carefully before
using your product and keep it for future reference.

The User Manual will help you use your machine in a
fast and safe way.

• Read the User Manual before installing and starting your

product.

• In particular, follow the instructions related to safety.

• Keep this User Manual within easy reach for future reference.

• Also read all additional documents supplied with this

product.

Remember that this User Manual is also applicable for several

other models. Differences between models will be identified in
the manual.

This product has been produced in environmentally friendly, modern facilities

CONTENTS

1 Safety Warnings 2

2 Technical Aspects Of Your Machine 3

3 Hints For Ironing 4-8

4 Maintenance And Cleaning 9

1

1

Safety Warnings

For safety purpose you should read
these instructions carefully before
using the iron for the first time.

DO’S

1. Check the mains voltage stated
on the iron.

2. Unwind and straighten the power

cord before use.

3. Switch on the iron by turning the
Temperature Dial in clockwise direc­tion; pilot light glows.

4. Turn the Temperature Dial to the
middle point of 1 dot, 2 dots, 3 dots
or maximum setting.

5. Switch off the iron by turning the
Temperature Dial in anti-clockwise
direction when it is not in use, even
for a short period of time. Turn the

Temperature Dial to°•Min° position.

6. Disconnect the iron from mains
supply outlet when filling or emptying
water.

7. Remove the water remained in the

water tank.

8. Use the Self-Cleaning function at

least once a month.

9. Switch off the steam function by
moving the steam control knob to

position when it is not in use, even

for a short period of time.

10. If the supply cord is damaged, it

must be replaced by the manufac­turer or its service agent or similarly
qualified person in order to avoid a
hazard.

iron or the power cord when ironing.

2. Do not leave the iron unattended
when it is connected to a mains
supply outlet.

3. Do not use an extension power
cord set unless competent authority
has approved it.

4. Do not add perfumed, vinegar or
other chemical liquids into the water
tank; they can damage the iron
seriously.

5. Do not immerse the iron in water
or any other liquid.

6. Do not use the iron when it is
damaged or it works improperly.

7. Do not roll the power cord around
the iron for storage until it has
cooled down completely.

8. Do not attempt to open the
cabinets or dismantle any parts from
the iron; there is no serviceable part
inside.

DO NOT’S

1. Do not allow children touch the

2